20 Most Recent Zassenhaus 154 Manual Burr Grinder Questions & Answers

On the manufacturers web site or try google and gargle it.

Coffee Makers &... | Answered 5 hours ago

I'm not 100% sure what you are asking here, but I'll link the Breville manual and point out some pages that may help you since I want to try and help a fellow coffee fan.


Page 8 deals with coffee preparation.

Illustration 9 states:
To stop the coffee flow before touch the lit control or move the slider towards the back of the machine until it stops.

Illustration 10:
To manually top up your coffee, touch any of the controls within 4 seconds from end of preparation and touch lit control again to stop

Illustration 11:
To change the selected cup size during brewing select the new desired control. The machine will stop immediately if coffee volume extracted is larger than new desired control.

Page 9 deals with programming the water volume, and I feel like this may be what you are wanting to know.

Illustration 1:
Any control can be programmed. Completely open the slider and insert a Nespresso capsule.

Illustration 2:
Touch and hold the control while closing the slider. Release control when desired volume is reached. The other 2 controls flash for confirmation. Water volume level is now stored in the control used during programming.

Illustration 3:
Press and hold the Espresso & Lungo controls together for at least 4 sec. The other control flashes for confirmation.

To the side of those illustrations is the following note:

Factory settings are: 1. Lungo, Espresso, Ristretto controls 110 ml / 3.7 oz, 40 ml / 1.35 oz., 25 ml / 0.84 oz. 2. Automatic Off mode after 9 minutes. 3. Most frequently chosen cup size as Espresso control at 40 ml / 1.35 oz.

Happy coffee drinking!

Coffee Makers &... | Answered on Jul 30, 2020

Sounds like the motor underneath the frother unit has broken down. If you still have warranty, then go to the retailer. Otherwise you maybe can check the unit by opening it from the bottom and checking all the resistances of all the components with a multimeter to figure out what went down.

Coffee Makers &... | Answered on Jul 24, 2020

Your mystery machine needs an o-ring service, or a new water tank due to a crack.

Coffee Makers &... | Answered on Jul 11, 2020

Request the manual from Euro Lab.

Coffee Makers &... | Answered on Jul 10, 2020

Comment. Irrelevant

Coffee Makers &... | Answered on Jul 04, 2020

Never known anyone need to de-ventilate a coffee maker.


make model ventilate error

Coffee Makers &... | Answered on Jun 22, 2020

Light blinks while machine is running.
If coffee is flowing normally, this indicates the machine is working properly. If only water is flowing, the machine is executing a user request for either cleaning, descaling or emptying the system.

Coffee Makers &... | Answered on May 29, 2020


Coffee Makers &... | Answered on May 26, 2020

Not finding what you are looking for?
Zassenhaus 154 Manual Burr Grinder Logo

Popular Tags

1 questions posted

Ask a Question

Usually answered in minutes!

Top Zassenhaus Coffee Makers & Espresso Machines Experts


Level 3 Expert

8597 Answers


Level 3 Expert

85239 Answers

Ross Keen

Level 3 Expert

1364 Answers

Are you a Zassenhaus Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Zassenhaus Coffee Makers & Espresso...

  • Zassenhaus Coffee Makers & Espresso...

Most Popular Question

salt mill replaced

  • Coffee Makers & Espresso Machines