20 Most Recent
GE 30 in. JP328SFSS Electric Cooktop Questions & Answers
When I turn on the coil burner it goes to full
The switch contacts are burnt and sticking. Very common problem. The model and
serial should be behind the bottom drawer on the (right side for GE). This switch runs
around 45 dollars. I do not recommend using a "universal" as they are just a pain to install and cut the shafts.
7/30/2011 7:16:01 PM •
GE 30 in....
•
Answered
on Jul 30, 2011
I just bought a jp328sfss
It sounds like you better be careful for starters. I also suggest your handyman sticks to painting. In older homes a 208/240 circuit onlt had three wires. New construction and remodeling requires a four wire system. Per code, a black wire is 120VAC, and a red wire is 120VAC. In a 240VAC circuit they would be called L-1 and L-2 respectively. In order to provide 240VAC they must be on seperate phases. The bare wire in your bundle is the ground wire and is at the same potential as neutral, or the white wire in current four wire systems. If you know how to use an electrical test meter, you should show 120VAC from black to bare copper, 120VAC from red to bare copper, and 240VAC from black to red. If this is not the case, I strongly suggest you have an electrician come in and take care of it in your breaker panel. *****Electricity is nothing to fool around with if you are not absolutely sure you know what you are doing. A loose connection, a wrong connection can result in fire, serious injury or death. It's worth a service call to a licensed electrician or qualified appliance service technician to give you peace of mind, and years of safe use of your new cooktop.
11/18/2010 5:54:08 AM •
GE 30 in....
•
Answered
on Nov 18, 2010
Lamona ceramic hob
Ceramic cooktops need the correct type of pots or they leave marks,check your instruction manual.
2/17/2021 6:49:19 PM •
GE Cooktops
•
Answered
on Feb 17, 2021
KNOBS WON'T TURN
if the knobs wont turn, the cooker needs to be serviced by a gas engineer the gas taps are seized they need gas tab grease
11/1/2020 7:28:10 PM •
GE Cooktops
•
Answered
on Nov 01, 2020
Ge monogram induction cooktop error F
The induction cooktop will flash "F" when cookware has been removed from the surface; cookware is not present when the unit is turned on; or cookware is not centered on the element.
Position the cookware properly over the center of the cooking surface if the error code "F" flashes. Use only induction cookware and use a bigger pan, as the error code "F" indicates that the pan is too small for the cooking element.
1/9/2019 10:31:53 PM •
GE Cooktops
•
Answered
on Jan 09, 2019
Not finding what you are looking for?