20 Most Recent Zassenhaus Knee Mill Hand Crank 156 Manual Burr Grinder Questions & Answers


use a small abount of your ladyfriwenjds nail varnish on the adjustment nut or screw to prevent vibration from lossening it.

Please rate my help++++Thanks for using FIXYA

Zassenhaus Knee... | Answered on May 17, 2019


For excessive staining use of household stain or scale remover is recommended. To remove difficult stains fill your flask with hot water, add one teaspoon of bicarbonate of soda and secure cap. Soaking overnight produces excellent results. Always rinse before re-use.
this is from http://www.thermos.co.uk/care.php
my hubby used it as he uses his thermos daily... so goodluck!

Zassenhaus Knee... | Answered on Sep 01, 2009


I have a Zass and sometimes have a problem with it self adjusting, but when I do need to adjust it, I find that I have give it a good tap on the top to make sure it adjusts. So, just turn the knob counter clockwise as far as it will go, then give it a good knock on the top and bottom and try again. My mill offers the full grinding range, from a fine powder to large chunks.

Zassenhaus Knee... | Answered on May 03, 2009


May, The only Zassenhaus products I know of are burr grinders, not coffee makers. About any kind of coffee maker...are you speaking about the appliance attachment cord? If you have the brand, or can carry the unit in, the cord can be matched at the local hardware store. If you don't have such access, get the name/model number and call www.smallappliance.com.

Hope this helps.

Zassenhaus Knee... | Answered on Dec 03, 2007


On the manufacturers web site or try google and gargle it.

Coffee Makers &... | Answered 5 hours ago


I'm not 100% sure what you are asking here, but I'll link the Breville manual and point out some pages that may help you since I want to try and help a fellow coffee fan.

https://www.appliancesonline.com.au/manuals/bec300w/bec300w_operatinginstructions.pdf

Page 8 deals with coffee preparation.

Illustration 9 states:
To stop the coffee flow before touch the lit control or move the slider towards the back of the machine until it stops.

Illustration 10:
To manually top up your coffee, touch any of the controls within 4 seconds from end of preparation and touch lit control again to stop

Illustration 11:
To change the selected cup size during brewing select the new desired control. The machine will stop immediately if coffee volume extracted is larger than new desired control.

Page 9 deals with programming the water volume, and I feel like this may be what you are wanting to know.

Illustration 1:
Any control can be programmed. Completely open the slider and insert a Nespresso capsule.

Illustration 2:
Touch and hold the control while closing the slider. Release control when desired volume is reached. The other 2 controls flash for confirmation. Water volume level is now stored in the control used during programming.

Illustration 3:
Press and hold the Espresso & Lungo controls together for at least 4 sec. The other control flashes for confirmation.

To the side of those illustrations is the following note:

Factory settings are: 1. Lungo, Espresso, Ristretto controls 110 ml / 3.7 oz, 40 ml / 1.35 oz., 25 ml / 0.84 oz. 2. Automatic Off mode after 9 minutes. 3. Most frequently chosen cup size as Espresso control at 40 ml / 1.35 oz.

Happy coffee drinking!

Coffee Makers &... | Answered on Jul 30, 2020


Sounds like the motor underneath the frother unit has broken down. If you still have warranty, then go to the retailer. Otherwise you maybe can check the unit by opening it from the bottom and checking all the resistances of all the components with a multimeter to figure out what went down.

Coffee Makers &... | Answered on Jul 24, 2020


Your mystery machine needs an o-ring service, or a new water tank due to a crack.

Coffee Makers &... | Answered on Jul 11, 2020


Request the manual from Euro Lab.

Coffee Makers &... | Answered on Jul 10, 2020


Comment. Irrelevant

Coffee Makers &... | Answered on Jul 04, 2020


Never known anyone need to de-ventilate a coffee maker.

https://www.google.com/search?q=Ventilate+sign+remains

make model ventilate error

Coffee Makers &... | Answered on Jun 22, 2020

Not finding what you are looking for?
Zassenhaus Knee Mill Hand Crank 156 Manual Burr Grinder Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Top Zassenhaus Coffee Makers & Espresso Machines Experts

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Ross Keen

Level 3 Expert

1364 Answers

Are you a Zassenhaus Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Zassenhaus Coffee Makers & Espresso...

  • Zassenhaus Coffee Makers & Espresso...

Most Popular Question

descale thermos

  • Coffee Makers & Espresso Machines
Loading...