20 Most Recent
- Page 5 Questions & Answers
GE Fridge will not stop flashing zeros diagnostic
I had the same problem. The cause is the digital display is not communicating with the motherboard. What had happened in my case is the plug connection between the door's digital display and the motherboard had become unplugged. The wire running from the motherboard runs below the fridge, and connects via plug located along the bottom of the fridge below the freezer door, connecting to the wire running from the display to the bottom of the freezer door. I just reconnected it and that reset the display. Glad for it too, I thought I needed a new $130 motherboard! Hope this helped!
on Oct 12, 2020
French door style frig.
the magnet seal arount the door needs to be replace, ypu can purchsase this and simply remove the old and and glue on the new one.
another quick fix method is to use a hax and staple type lock and screw the stape on the frodge and the hax on the door sor sfter you puch in the door simply staple it shut.
on Jun 19, 2020
I have a GE refrigerator Model GDL20KCSABS that does not get cold both frig and freezer. The compresser is working and the fan works.
It is the job of the refrigeration system to move heat from inside the cabinet to the outside - that is why when it works correctly, the compressor runs and the condenser and some of the pipework becomes quite warm (hand hot in some cases).
If this is happening it proves heat is being moved though if the cabinet doesn't become colder it is possible the heat that is being moved could be coming, in a frost free appliance, from the defrost heating element that must be permanently on due to a timer or thermostat fault. The defrost heater usually is switched on only for a short time at the end of each cooling cycle.
If the condenser isn't warm while the compressor is running, it could be the compressor is broken or the refrigerant has leaked away.
on Jun 16, 2020
Not finding what you are looking for?