20 Most Recent
Danby DBC162BLSST | Silhouette Select 5.3 cu.ft. Capacity Built-In Beverage Center - Page 8 Questions & Answers
What is a coffee table?
A coffee table is a table that is long and low. It is meant to be at the same level as your
couch and is generally used for drinks and finger food.
2/25/2023 10:17:44 AM •
Furniture
•
Answered
on Feb 25, 2023
How Often You Should Get Your Sofa Cleaned Along With Related Services?
It is generally recommended to have your sofa professionally cleaned every 12-18 months, depending on the amount of use it gets and the type of fabric it is made of. If you have children or pets, or if you use your sofa frequently, you may want to have it cleaned more often. Some types of fabric, such as microfiber or leather, may need to be cleaned more frequently as well.
There are a few other related services that you may want to consider when it comes to maintaining your sofa:
- Fabric protection: This is a treatment that is applied to the fabric of your sofa to help protect it from stains and spills. It can make it easier to clean up spills and stains, and can help prevent them from setting in and becoming harder to remove.
- Odor removal: If your sofa has developed an unpleasant smell, you may want to consider having it treated with an odor-removal product. This can help eliminate odors caused by pets, smoke, or other sources.
- Fabric repair: If your sofa has suffered any damage, such as holes, tears, or frayed edges, you may want to have it repaired. This can help extend the life of your sofa and keep it looking its best.
Overall, the frequency with which you have your sofa cleaned and the related services you choose will depend on your individual needs and preferences. It is a good idea to consider the type of fabric, the amount of use your sofa gets, and any specific problems or concerns you have when deciding how often to have it cleaned and what services to request.
2/25/2023 10:12:54 AM •
Furniture
•
Answered
on Feb 25, 2023
How do I get wedged brackets apart?
If the bracket on your recliner assembly is wedged and won't come apart, there are a few methods you can try to loosen it:
- Tap the bracket gently with a rubber mallet or a block of wood. This can help loosen any rust or debris that may be causing the bracket to stick.
- Apply a penetrating oil, such as WD-40, to the bracket. This can help loosen any rust or debris that may be causing the bracket to stick. Allow the oil to sit for a few minutes before attempting to remove the bracket.
- Use a pair of pliers or a wrench to grip the bracket and gently twist it back and forth. This can help loosen any rust or debris that may be causing the bracket to stick. Be gentle, you don't want to damage the bracket.
- If the above methods do not work, you may need to use a saw or a metal cutting tool to carefully cut the bracket apart. Be sure to wear protective gear and use caution when working with tools.
If you are not comfortable with any of the above methods, or if the issue persists after trying them, it may be best to contact the manufacturer or a professional technician for further assistance. They may ask you to provide your chair's serial number and other information to help troubleshoot the problem.
2/25/2023 10:11:42 AM •
Furniture
•
Answered
on Feb 25, 2023
Why is my whynter wine cooler beeping and flashing the display
due to many reasons, your whynter wine cooler temprature can beep
the main reason is to disrupt the proper storage
not at the adjustable place
also read for further detail...
https://kitchencol.com/whynter-wine-cooler-temperature-flashing/
2/25/2023 10:09:22 AM •
Furniture
•
Answered
on Feb 25, 2023
Human Touch PC-075 Recliner is there a stop setting?
The Human Touch PC-075 recliner does not have a stop setting to limit the amount of recline. However, you may be able to adjust the recline tension by using the adjustment knob located under the seat. This will control the ease with which the chair reclines and returns to the upright position.
Adding a mechanical stop to the recline mechanism is not recommended, as it may interfere with the chair's operation and potentially damage the mechanism. It's best to adjust the tension as needed using the adjustment knob.
2/25/2023 10:06:51 AM •
Furniture
•
Answered
on Feb 25, 2023
Instructions on assembly of mainstay kids table and chair set
Hello, Shartrice -
The Mainstays trademark is owned by Walmart.
I have not found assembly instructions for any Mainstays children's table and chair set online.
Therefore, I suggest you contact Walmart Customer Service and ask about the availability of the assembly instructions for the model of table and chairs which you have. This is the link to the Walmart Contact Us web page:
https://corporate.walmart.com/contact-us
Best wishes.
2/15/2023 4:59:56 PM •
Furniture
•
Answered
on Feb 15, 2023
Tempur-pedic Ergo Premier not lifting
I hat the same problem with my Ergo Premier remote... I called the customer service at Tempurpedic, and the lady told me to push de FLAT button and hold it for 35 seconds. As simple as that.
It is soon written RST on the screen... and it flashes...
After 35 seconds, you can release it. The RST will disappear.
And then it worked for me... The remote was functioning!
2/2/2023 11:17:45 PM •
Furniture
•
Answered
on Feb 02, 2023
How do you replace a B03F4666 Temperature Control board for the AW-320ED wine cooler? I received the part and the instruction but the instruction is not accurate and does not work
To replace the B03F4666 Temperature Control board for the AW-320ED wine cooler, follow these steps:
Unplug the wine cooler and locate the control board inside the wine cooler.
Remove the screws or connectors that secure the old control board in place.
Disconnect the wires from the old control board.
Connect the wires to the new control board in the same configuration as the old control board.
Secure the new control board in place with screws or connectors.
Plug in the wine cooler and test the temperature control to ensure it is working properly; https://kitchencol.com/edgestar-wine-cooler-lights-blinking/
If the instruction manual you received is not accurate, you can try finding a video tutorial online or reaching out to the manufacturer for clarification on the replacement process.
2/2/2023 10:22:28 AM •
Furniture
•
Answered
on Feb 02, 2023
Broyhill attic heirloom computer armoire how to move middle shelf
Moving the middle shelf on a Broyhill Attic Heirloom computer armoire may vary depending on the specific model. Here are some general steps you can try to move the middle shelf:
- First, empty the shelf and any items that may be on top of it.
- Locate any locking or adjustment mechanisms that may be holding the shelf in place. These mechanisms may include pins, levers, or knobs. Depending on the model, the locking mechanism may be located on the side, back or bottom of the shelf.
- Once you have located the locking mechanism, release it by turning, sliding or pressing the lever.
- Carefully lift the shelf out of the armoire and move it to the desired position.
- Re-engage the locking mechanism to secure the shelf in place.
- If you are having trouble locating the locking mechanism or if the instructions on your armoire are not clear, you may want to check the manual that came with the armoire or contact Broyhill customer support for assistance.
It is important to be careful when moving the shelves to avoid damaging the armoire or injuring yourself. If you feel unsure about doing this, it is best to contact a professional or Broyhill customer support for assistance.
1/22/2023 3:45:44 PM •
Furniture
•
Answered
on Jan 22, 2023
I have a simmons nuflex bed that is fine except the foot wont raise. Massage works on foot, but it just wont lift. No clicking or noises when using the remote
If the foot of your Simmons Nuflex bed will not raise, there may be an issue with the motor or the lift mechanism. Here are a few things you can try to fix the problem:
- Check the remote control: Make sure the remote is properly functioning and the batteries are not dead. Also, check that the foot lift button is not stuck.
- Check the wiring: Check the wiring between the remote, the lift mechanism, and the motor for any frayed or disconnected wires. If you find any damaged wires, they will need to be repaired or replaced.
- Check the lift mechanism: Inspect the lift mechanism and look for any visible damage or debris that may be preventing the foot from raising. Clean the lift mechanism and lubricate it with light oil.
- Check the motor: If the motor is not functioning properly, it may be preventing the foot from raising. If the motor is faulty, it will need to be replaced.
If you are not comfortable with these steps, or if the issue persists after trying them, it may be best to contact Simmons customer support or a professional technician for further assistance. They may ask you to provide your bed's serial number and other information to help troubleshoot the problem.
1/22/2023 3:44:03 PM •
Furniture
•
Answered
on Jan 22, 2023
Not finding what you are looking for?