20 Most Recent GE JVM2070 Microwave Oven Questions & Answers


There is a wire mesh filter and a carbon filter on the under side of the unit. IF they are plugged then it wont draw air. The other issue is this unit has a dual option for installing the fan. One is to vent to the outside and the other is to vent to the inside, if the fan is not installed for the correct usage, you have no airflow either.

GE JVM2070... • Answered on Oct 19, 2017


1. Unplug the microwave or turn off its breaker.

2. Open the door, then detach the control panel as shown in the video at
http://www.microwavedisplay.com and swing it down, but without disconnecting the wires.

If you have any trouble getting the grille off once the screws are removed, slide the hood vent grille to the left about 1/4", then then pull it forward.

On some models there are L-shaped clips that fit into a slot to hold bottom of the vent.

You can find helpful exploded view diagrams and order parts by entering your full model number here.

They're our favorite supplier.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

GE JVM2070... • Answered on Nov 02, 2016


check DC power supply on that display Board. loosed ribbon connector too.

GE JVM2070... • Answered on Jul 22, 2014


change ur megnatron may b solved ur problem

GE JVM2070... • Answered on May 11, 2014


The control board probably failed and needs to be replaced

GE JVM2070... • Answered on Dec 01, 2013


Then just replace the keypad they stick on like a sticker and the ribbon part of it plugs into the control board

GE JVM2070... • Answered on Nov 30, 2013


measure this test and use the multimeter for fix it. GOD BLESS YOU
  1. Exhaust fan motorIf your exhaust fan motor is not running, there are a couple of things that you can check involving the motor to locate the problem. After removing the fan motor, you can manually attempt to turn the fan blades with your hand. If the fan motor is working properly, the blades should spin effortlessly. If this does not occur and the blades are taught, the motor will need to be replaced. Secondly, the fan motor itself can burn out due to time and usage. Using an ohm meter, the exhaust fan motor should read open for continuity. If it does not, then the fan motor has expired and will need to be replaced.
  2. ThermostatAnother part that could cause the microwave exhaust fan to not work is a faulty thermostat. A thermostat gauges the air temperature, which activates the exhaust fan when required. If this part becomes flawed, the exhaust fan will not energize and the thermostat will need to be replaced.
  3. Main control boardIf your exhaust fan is still not working and the microwave fan motor, wiring, and thermostat are operating accurately, the root cause could be with the main control board. Replace the main control board.
eac73919-fb4b-4215-9b09-4be6d14c228d.jpg037010e4-f03c-4ce0-9505-3877497d2ea4.gif

GE JVM2070... • Answered on Nov 08, 2013


follow this test and use the multimeter and fix it. God bless you
  1. Exhaust fan motorIf your exhaust fan motor is not running, there are a couple of things that you can check involving the motor to locate the problem. After removing the fan motor, you can manually attempt to turn the fan blades with your hand. If the fan motor is working properly, the blades should spin effortlessly. If this does not occur and the blades are taught, the motor will need to be replaced. Secondly, the fan motor itself can burn out due to time and usage. Using an ohm meter, the exhaust fan motor should read open for continuity. If it does not, then the fan motor has expired and will need to be replaced.
  2. ThermostatAnother part that could cause the microwave exhaust fan to not work is a faulty thermostat. A thermostat gauges the air temperature, which activates the exhaust fan when required. If this part becomes flawed, the exhaust fan will not energize and the thermostat will need to be replaced.
  3. Main control boardIf your exhaust fan is still not working and the microwave fan motor, wiring, and thermostat are operating accurately, the root cause could be with the main control board. Replace the main control board.
6b9e458e-3778-419a-8333-199b8cb372a6.jpg65d0e5b7-dcc3-4311-8b4c-91e5c361525d.gif

GE JVM2070... • Answered on Nov 08, 2013

Not finding what you are looking for?
GE JVM2070 Microwave Oven Logo

133 questions posted

Ask a Question

Usually answered in minutes!

Top GE Microwave Ovens Experts

gbob59

Level 3 Expert

3063 Answers

randymanfive

Level 3 Expert

501 Answers

Cindy Wells

Level 3 Expert

6259 Answers

Are you a GE Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Microwave Ovens

  • GE Microwave Ovens

Most Popular Question

ge microwave oven display unresponsive

  • Microwave Ovens
Loading...