Mercury 4-Stroke 3.5 HP Outboard, Manual, Long Shaft - Answered Questions & Fixed issues

0helpful
2answers

Can an external gas line be connected

Yes it is possible
3/7/2019 1:19:34 PM • Mercury 4-Stroke... • Answered on Mar 07, 2019 • 379 views
0helpful
1answer

Show the gap setting on 3.5 hp Yamaha air cooled outboard motor

Try .28" or .01mm
6/23/2017 4:21:47 PM • Mercury 4-Stroke... • Answered on Jun 23, 2017 • 319 views
0helpful
2answers

Mercury outboard problems

Is this a two stroke?-If it is you most likely have a primary seal going bad (crankcase seal on the ignition side will lean it out,leaking seal on the other-side of assembly will do just what your describing)Hope this helps you out.....
2/11/2015 12:30:17 AM • Mercury 4-Stroke... • Answered on Feb 11, 2015 • 591 views
0helpful
1answer

Why does my mercury 3.5 runs very hot ?

Check timing,check for crankcase oil seal leaks,also look for intake leaks......
8/7/2014 7:05:03 PM • Mercury 4-Stroke... • Answered on Aug 07, 2014 • 220 views
0helpful
1answer

Mercury 40 outboard 2cyl 2 stroke backfiring ,non starter.

limited info generic answer ---timing --carb -coil --fuel problem
4/16/2024 3:44:57 PM • Mercury Boating • Answered Yesterday • 14 views
0helpful
2answers

Mercury Outboard Motor. Year of manufacture for serial number A133352.

Question edited for a lot more clarity. They are normally listed by HP. https://www.google.com/search?q=mercury+outboard+serial+number+lookup ..
4/7/2023 10:44:34 PM • Mercury Boating • Answered on Apr 07, 2023 • 58 views
0helpful
1answer

Anybody know where I can find a Service Manual for a 2016 Mercury 15 HP 4 stroke (Non-EFI) outboard.

https://www.downloadboatmanuals.com/motors/mercury/ -------https://www.autopartsrepairs.com/mercury-outboard-repair-manual/
12/13/2022 1:54:32 PM • Mercury Boating • Answered on Dec 13, 2022 • 62 views
0helpful
1answer

1980 mercury thunderbolt 7.5 hp outboard, i can't figure out where to fill the lower unit gear oil? I have a flush hole then a tiny one at the bottom but can't find the 3rd hole, any ideas??

https://www.mercurymarine.com/en/us/land/owners-manuals/ https://www.downloadboatmanuals.com/motors/mercury/
9/19/2022 1:48:44 PM • Mercury Boating • Answered on Sep 19, 2022 • 103 views
0helpful
1answer

The serial # on my Mercury 700 outboard is 4978147. What year is it?

Not all serial numbers give the year of manufacture. It will be in one of two locations on the label you got the serial number from. Look on the next line down under the actual serial number. There should be a four digit number. This is the year of manufacture. On some labels there is a small square in the lower right corner, next to the CE mark, with a two digit number in it. This is the last two digits of the production year. 02 is 2002, 04 is 2004 and so on.
6/29/2022 9:28:59 AM • Mercury Boating • Answered on Jun 29, 2022 • 61 views
0helpful
1answer

Mercury serial number#586433 What year is this mercury?

1/28/2022 6:54:51 PM • Mercury Boating • Answered on Jan 28, 2022 • 426 views
0helpful
2answers

My merc. 40 hp. 2 stroke tilt trim works at the dock but not under way. It seems too weak to work under load. What should I try to remedy this problem?

Make sure your engine is producing electricity and battery is good (this does not mean charged you must have it load tested). If both of these are good than you might have a weak trim pump or a bad valve body. You can get these parts aftermarket through sierra.
4/7/2022 5:21:44 AM • Mercury Boating • Answered on Apr 07, 2022 • 813 views
0helpful
2answers

I want to remove the final drive from a Mariner 15HP outboard but the shaft won't come away.

you have to disconnect the shift rod first
10/29/2021 2:05:36 AM • Mercury Boating • Answered on Oct 29, 2021 • 225 views
0helpful
1answer

Is a Mercury 20 hp (2 cylinder) outboard a 2 or 4 stroke engine? It’s ID is:~ • OG388853 • EH 1996

most likely it is a 2 stroke
10/29/2021 1:34:01 AM • Mercury Boating • Answered on Oct 29, 2021 • 212 views
0helpful
2answers

2009 90hp 2stroke mercury optimax. Does it have an oil filter?

NEVER SAW ONE THAT DID
8/26/2021 7:36:40 AM • Mercury Boating • Answered on Aug 26, 2021 • 208 views
0helpful
2answers

Mercury 9.9 2 stroke motor goes but propeller not moving

DRIVE SHAFT POSSIBLY BROKE SEE A DEALER
8/26/2021 7:36:01 AM • Mercury Boating • Answered on Aug 26, 2021 • 252 views
0helpful
1answer

Does a 1979 Mercury 40 HP 2 Stroke have a fuse in it? If so, where is it located?

Does it turn over? But won't start? Have you checked the spark? My thought, if it turns over it's not a fuse. See if you have a spark at the plugs, YouTube will show you how. If spark! Next is fuel. If no spark, Probably blown ignition module, not fuse.
8/17/2021 9:43:34 PM • Mercury Boating • Answered on Aug 17, 2021 • 75 views
0helpful
1answer

I have a 2013 50hp 4stroke mercury outboard engine what is the rod cap tourqe specs to

Product Knowledge Handbook - Mercury Marine

www.mercurymarine.com > pdf > Mercury-Outboards PDF Specifications, features, and options are subject to change without notice. ... Connecting Rod: Linkage that connects the crank to the piston in an engine or ... crankshaft main bearing cap is secured by four bolts, rather than the standard two, for ... Found on all Mercury Marine 4-stroke ... At top speed, Mercury 50hp Four.

mercury torque specs - The Hull Truth - Boating and Fishing ...

www.thehulltruth.com > ... > The Boating Forum
Nov. 3, 2017 - The Boating Forum - mercury torque specs - im looking for mercury powerhead torque ... Proportional Serif, Monospace Serif, Casual, Script, Small Caps ... sorry for the novice question, but is this correct for marine engines? if so, ... 4-16 - titled POWERHEAD Crankshaft, Pistons and Connecting Rods (4 Cyl.) ... Missing: 2013 ‎cap

40/50/60 FourStroke - Brunswick Marine in EMEA Download ...

download.brunswick-marine.com > outboard > 4-stroke
PDF information. The description and specifications contained herein were in effect ... Name of engine manufacturer: Mercury Marine Technology Suzhou Co., Ltd. Address: ... 4 stroke. Identification of Engines Covered by This Declaration of. Conformity. Name of ... in loosening or disengagement of the steering link rod. This can.

torque specifications for 1983 50 hp mercury outboard for ...

forums.iboats.com > ... > Mercury & Mariner Outboards
Jul. 17, 2013 - I think those bolts are 5/16 and for clean dry threads 20 ft-lbs is roughly the rating. That's for a grade 5 (3 marks on the head) but marine engines ...
3/4/2021 11:12:06 PM • Mercury Boating • Answered on Mar 04, 2021 • 141 views
0helpful
1answer

What model and year is a 90hp mercury outboard ser. No.OB378882?

That serial number was produced during the years of 1988 through 1990.
10/21/2019 3:40:38 PM • Mercury Boating • Answered on Oct 21, 2019 • 173 views
Not finding what you are looking for?
Mercury 4-Stroke 3.5 HP Outboard, Manual, Long Shaft Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Mercury Boating Experts

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

jws1013

Level 3 Expert

1713 Answers

Are you a Mercury Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...