20 Most Recent Digidesign Pro Tools LE and Digi 002 Questions & Answers

code for 7 protools le

Digidesign Pro... | Answered on Oct 20, 2013

What is your question?

Digidesign Pro... | Answered on Feb 04, 2011

i found the manual online.... It is wild how at first the internet seems free and more free then it starts to cost for information.... Yes you guys need to get paid and at first i wondered how but now it seems like i am paying twice will you are probably getting paid once... you know pay once when you buy the product then pay again for information on how to use the product.. I guess that is how it is going for everyone... or maybe it is just my mind cause music seem to be going that way... The clubs used to pay now many say you might get paid if the costumer wants to pay at the door to see you and if they buy enough drinks and some are even saying we have to pay to play so that's like 3 times pay.... your service is not that expensive but i was just looking for information or a manual for a product that i have brought several times with the 4 Mboxs and 5upgrades.... but good luck ... and thanks Gravett

Digidesign Pro... | Answered on Jul 19, 2009


Digidesign... | Answered on Nov 04, 2013


Few symptoms that your firewire is not working would be that the FireWire devices would intermittently drop off the bus. Another symptom was the Mac telling you that you had disconnected a FW drive (when you had not). Sometimes the problem manifested itself within the first two minutes of use; other times after 40 minutes. It first happened after the 10.2.6 update so you would be trying to get reinstalled the Combo updater (no improvement), and then after you did a clean install on another drive with 10.2.4 (same problems). Booting into single-user mode, you will see the following message appearing (all on one line):

IOFireWireSBP2Login::fetchAgentWriteComplete fetch
agent write failed! Retrying

It would repeat five or six times, then pause about a minute, and then repeat again, etc. Sometimes it would appear within the first minute after boot and other times it would take 30-40 minutes until it would appear - the same frequency the problems would develop when booted to the Finder. Suspecting a bad FW port (the lower port on the motherboard), I swapped the FW devices to the upper port...and the problem disappeared.

Let us know if you have something more to know else accept the suggestion.
Thank You for contacting Fixya.com

Digidesign... | Answered on Jul 25, 2010

Really? You're going to pay a lawyer because you can't play free games? Try the two options on this link;
Pogo My Account Recover your Screenname Password

Computers &... | Answered 32 minutes ago

hi Carol.
this is all i could find out.
Click on a link below for further assistance. Macy's Money is a rewards card that you can receive by making qualifying purchases with any form of payment, online and in-store. Use your Macy's Money in addition to coupons & sale prices, even on our best brands - including cosmetics and fragrances!

What is Macy's Money and how do I redeem it? - Macy's Customer ...

plus you could go to this link might help you to find out.
How do use my money at Macy Google Search

Computers &... | Answered 2 hours ago

windows media center can do this

Computers &... | Answered 2 hours ago

Request the manual from Berg.

Computers &... | Answered 8 hours ago

If you registered software then you should be able to retrieve number from manufacturer web site

Computers &... | Answered 9 hours ago

click on esc button. Or "Alt" 4

Computers &... | Answered 10 hours ago

from the windows 19 error site, maybe it will help:Vijay_Verma
Replied on April 8, 2018 Rather than getting into technicalities and analyzing log files, you should upgrade this manually.

1. Right click on Windows Start > Windows Powershell (Admin)
Type following (or copy and paste following) one by one and Enter

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
Ren C:\Windows\System32\catroot2 Catroot2.old
net start wuauserv
net start cryptSvc
net start bits
net start msiserver

2. Type following in Windows Start Search box and hit Enter %systemroot%\Logs\CBS > Rename CBS.Log to something else.
If it doesn't allow you to rename - Type services in Windows Start Search box > Click Services > Scroll down to find the Windows Modules Installer service and double-click on it > Set its startup type to Manual > Reboot your computer
Go to C:\Windows\Logs\CBS > Rename CBS.Log > Reboot your computer > Then go back into the Services App and set Windows Modules Installer Service back to Automatic Startup (Note CBS log files contain information about windows update, SFC etc)

(Source - https://partnersupport.microsoft.com/en-us/par_...)

3. You can go to https://www.microsoft.com/en-us/software-downlo...

3.1 Click Update now to update to 1709 through Upgrade Assistant.
3.2 You can download the latest Windows 10 package from this link (media creation tool) and follow the instructions there to upgrade. Use the very simple instructions given under Using this tool to upgrade this PC to Windows 10
Best regards
Vijay Verma

Timezone: UTC+05:30, PST+12:30
Availability Hours (UTC) : 05:00 AM - 05:00 PM

Computers &... | Answered 10 hours ago

Find a local insolvency practitioner. They will work with the credit card companies to help you.



Computers &... | Answered 14 hours ago

Not finding what you are looking for?
Digidesign Pro Tools LE and Digi 002 Logo

Popular Tags

22 questions posted

Ask a Question

Usually answered in minutes!

Top Digidesign Computers & Internet Experts


Level 3 Expert

85239 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers


Level 3 Expert

1630 Answers

Are you a Digidesign Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Digidesign Computers & Internet

  • Digidesign Computers & Internet

Most Popular Question

authorization code pro tools le 7

  • Computers & Internet