Honeywell Enviracaire 50250 Air Purifier - Answered Questions & Fixed issues

0helpful
1answer

I bought a honeywell air

9/13/2023 3:52:34 PM • Honeywell Air... • Answered on Sep 13, 2023 • 457 views
0helpful
1answer
0helpful
1answer

I just cleaned the filters in my honeywell hepa air purifier and now it wont run on anything but low speed

You didn't indicate the model. Perhaps this support page from Honeywell can help. https://www.honeywellpluggedin.com/air-purifiers/support
4/13/2020 3:54:14 PM • Honeywell Air... • Answered on Apr 13, 2020 • 394 views
0helpful
1answer

Why is Honeywell 52500 not working?

Honeywell does not have any serviceable parts. Get a new one.
10/24/2018 12:04:44 PM • Honeywell Air... • Answered on Oct 24, 2018 • 1,297 views
0helpful
1answer

My Honeywell Enviracare 13520. the problem is that I can't get the handle to loosen.

Are you really unscrewing it? (to the left)? If not, then perhaps put a hammer handle on the handle at the outside rim and thump the hammer with the palm of your hand..
10/24/2018 12:00:55 PM • Honeywell Air... • Answered on Oct 24, 2018 • 587 views
0helpful
1answer

Can you replace the control unit on a Honeywell air purifier model no.17007-HD

Normally Honeywell has NO replacement parts. Run it as is, then throw it away.
10/24/2018 11:56:55 AM • Honeywell Air... • Answered on Oct 24, 2018 • 674 views
0helpful
1answer

I have a Honeywell HPA050 air purifier. Both filter lights started blinking, so I changed both filters; however, I cannot get the red filter lights to stop blinking. I've held them pushed in, I've unplugged the unit...the lights are still blinking. Help!

Ignore the lights. Wash the outer foam filter every two months. As long as air is going through the inner filter does not need to be changed. Blow the inner filter out FROM THE INSIDE with your vacuum cleaner. (blow air the opposite direction of air flow to get the nasty stuff off.)
10/24/2018 11:55:32 AM • Honeywell Air... • Answered on Oct 24, 2018 • 1,709 views
0helpful
1answer

What is this burning smell from my Honeywell air purifier

am sorry to disappoint you, once this condition is reached, it means the motor windings have overheated and your motor needs to be replaced, This is the only best thing to do to rectify this situation. This indicates that the insulation covering the wire used to make the winding of the motor has been cooked by the overheating and it is shorting out ,THIS WILL CAUSE THE MOTOR CATCH FIRE. Please unplug the unit and have the motor replaced or buy a new unit for your safety.
10/20/2017 12:54:31 AM • Honeywell Air... • Answered on Oct 20, 2017 • 2,588 views
0helpful
1answer

Putting filter back in a Honeywell air purifier model hfd-135

Hello, this is Ava with Think Crucial. You may refer to this online manual for your model number to help you put back the filters in your unit. Honeywell QuietClean HFD 110 Series User Manual You can purchase a wide variety of high quality Honeywell replacement parts for your Honeywell Air Purifier direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10 https://www.thinkcrucial.com/search?type=product&q=honeywell I hope this was helpful. Ava B. Think Crucial Customer Care http://www.thinkcrucial.com/
2/17/2017 12:41:48 AM • Honeywell Air... • Answered on Feb 17, 2017 • 728 views
0helpful
1answer
0helpful
1answer

Why does my new Honeywell air purifier give out a smell.

maybe its what ever its pulling out the air in the room its in.or it needs a clean
11/6/2016 8:03:50 PM • Honeywell Air... • Answered on Nov 06, 2016 • 615 views
0helpful
1answer

How to reset indicator light on air filter

Hello, this is Ava with Think Crucial. When resetting your Intelli-Check Filter Indicator. the air purifier should be powered on. Press and hold the appropriate filter indicator button for approximately 10 seconds until the light turns off. You can purchase a wide variety of high quality Honeywell replacement parts for your Honeywell Air Purifier direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10 http://www.thinkcrucial.com/search?type=product&q=honeywell I hope this was helpful. Ava B. Think Crucial Customer Care http://www.thinkcrucial.com/
10/25/2016 10:49:42 PM • Honeywell Air... • Answered on Oct 25, 2016 • 1,684 views
0helpful
1answer

Changed filter and pre filter both lights continue to blink, not resetting

Hello, this is Ava with Think Crucial. Make sure that the new filters you installed are undamaged and correctly seated in it's assembly. When resetting the unit, unit must be powered on then press and hold the appropriate filter indicator button for approximately 10 seconds until the light turns off. If nothings happens, unplugged the unit from the power for about a minute and then try to reset the unit. If all else fails, I would suggest to contact Honeywell for more assistance. You can purchase a wide variety of high quality Honeywell replacement parts for your Honeywell Air Purifier direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10 http://www.thinkcrucial.com/search?type=product&q=honeywell I hope this was helpful. Ava B. Think Crucial Customer Care http://www.thinkcrucial.com/
10/25/2016 10:43:40 PM • Honeywell Air... • Answered on Oct 25, 2016 • 2,003 views
0helpful
2answers

Can somebody help fix the problem I'm having with my Honeywell air purifier....when I press power button it won't work all I see is red light any button I press red it wont do anything....pls!!!!.....

I have the same unit. Have you cleaned out the removable filters? also the red light at the bottom indicates the time to clean the filters. to reset it, use a paper clip. The red light on the bottom right is the filter indicator light, what looks like it should be a light beside that filter light, is actually a reset button, just poke it with a paper clip for a few seconds to reset. The bottom red light goes out
10/25/2016 10:19:23 PM • Honeywell Air... • Answered on Oct 25, 2016 • 2,415 views
0helpful
1answer

Where can i get a replacement lamp uv-145 2.5w

Sealand Replacement Bulb for Green Killing Machine - Petco

www.petco.com/.../Sealand-Replacement-Bulb-for-Green-Killing-...
PetcoWater flows in direct contact with UV lamp, making it extremely efficient. The zigzag flow are designed for maximum sterilizing time. Totally self-contained replacement bulb assembly for AA 9Watt UV Sterilizer Kit. .... 2.8" L x 2.5" W x 16.5" H

UV light sources - Norland Products

https://www.norlandprod.com/lightsourc.html
The Norland collection of long-wave, ultraviolet light sources have been carefully ...LED UV Curing System emits a consistent and repeatable 2.5 W/cm squared ... lack of liquid light guides and replacement lamps brings to the forefront of UV ...

[PDF]MultiPole LED UV Curing System - Electro-Lite

12/10/2015 10:45:24 PM • Honeywell Air... • Answered on Dec 10, 2015 • 730 views
0helpful
1answer

Looking for a break-down / exploded view of a Honeywell Air Purifier, model HFD-120 ?

Honeywell Air Purifier - problems - YouTube

? 1:22 www.youtube.com/watch?v=gWB121JIQMw Apr 28, 2011 - Uploaded by Bill Golden Overview of damage and possible fan problem with Honeywell Air Purifier. ... Honeywell QuietClean Compact ...
5/20/2016 11:03:12 AM • Honeywell Air... • Answered on May 20, 2016 • 1,000 views
0helpful
2answers

How do i get a replacement honeywell 50150 manual

[50150-N] 50150 True HEPA Air Purifier if you don't trust the link, its at http://www.kaz.com/kaz/customer-support/owner-manuals/ i.e. at kaz.com under customer support, on the right hand side click 'download owner manuals' and then find your product.
6/3/2015 2:02:30 AM • Honeywell Air... • Answered on Jun 03, 2015 • 378 views
0helpful
1answer

Need manual cant program start stop times or function at all? cant find manual anywhere! HELP!!!!!!!!!

You did not say what model you had. Here is a page I found for Honeywell. Next time you look up manuals, try typing in pdf instead of the word manual.http://www.honeywellcleanair.com/air-purifiers/customer-support/owner-manuals/
6/3/2015 12:38:55 AM • Honeywell Air... • Answered on Jun 03, 2015 • 440 views
0helpful
1answer

I have replaced both hepa filters on Honeywell enviracare 43300 air purifier and it is rattling, why?

something is loose maybe you put one in a little crooked and that is whey it would rattle or the screw that holds them in is loose , good luck
5/19/2014 4:40:01 PM • Honeywell Air... • Answered on May 19, 2014 • 272 views
Not finding what you are looking for?
Honeywell Enviracaire 50250 Air Purifier Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top Honeywell Air Purifiers Experts

Cindy Wells

Level 3 Expert

6688 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Are you a Honeywell Air Purifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...