Kenwood KM800 Major Classic Stand Mixer - Page 7 - Answered Questions & Fixed issues
SILLY QUESTION
Push the whisk attachment post up into the mixer, turn counter-clockwise and it should lock into position.
Kenwood mixer km220
Best I can do for a parts catalog is these guys;
http://www.partmaster.co.uk/cgi-bin/search.pl?query=Kenwood%20km220%20&pg=12&brand=Kenwood&model=km220&part=
They have the most comprehensive parts list for the km220 I could find. Check all the pages and see if you can identify the bit you need.
This company is in the UK - I guess you are in the US? - if you can post back with which part you need exactly, then I can try and find a supplier in the US if you like, although I believe Partmaster will distribute items worldwide.
Hope this helps, waiting for your info :)
1/21/2008 10:40:04 PM •
Kenwood KM800...
•
Answered
on Jan 21, 2008
•
1,263 views
Control Knob fell off
Usually most knobs have a "push fit" arrangement , sometimes there will be a screw that needs tightening
My kenwood multipro 910 food processor not working
Check the power supply: Ensure that the food processor is properly plugged into a functioning power outlet. Sometimes, a loose connection or a tripped circuit breaker can cause power issues.
Safety interlock system: The Kenwood Multipro 910 food processor usually has a safety interlock system that ensures all parts are properly assembled before it can start. Check if all the components, such as the bowl, lid, and blade, are correctly locked into place. If any of the parts are not properly assembled, the food processor may not work.
Motor overload protection: If you have been using the food processor for an extended period or with heavy ingredients, the motor may have overheated and triggered the overload protection mechanism. In this case, you will need to allow the motor to cool down for some time before it can restart.
Fuse or circuit breaker: Some food processors have a built-in fuse or circuit breaker that protects the motor from electrical surges. Check if your food processor has a fuse and ensure that it is intact. If it has a circuit breaker, reset it if necessary.
Mechanical issues: If none of the above steps resolve the problem, there might be a mechanical issue with the food processor. It could be a faulty motor, broken wiring, or a malfunctioning switch. In such cases, it is advisable to contact the Kenwood customer support or take the appliance to an authorized service center for repair.
7/16/2023 12:10:20 PM •
Kenwood Food...
•
Answered
on Jul 16, 2023
•
81 views
Is is worth repairing a Kenwood Prospero stand mixer km24?
If you have a multi meter check the box caps and resistors for KM 2XX series then replace it whenever required. Some may differ in values like 0.15uF 275x2, 0.33uF 275X2 or 0.47uF 275X2 then resistors may also differ with different models but common to have 1.1k ohms 2watts. Also if caps are open it is good to check the 600V triac and replace it when giving out lower output. I also advise to clean the commutator esp when is is sparking a lot, you may use light sanding and clean it after. Check also if the tachometer is good, there is a resistor-like-coil hidden under a plastic tab with 2 wires. This gives feedback and via a magnet attached to the shaft. Check the motor brush if it is good or worn out. Lastly check all the switches because if one of them is not working properly you wont be able to let the motor run.
3/15/2022 9:48:12 AM •
Kenwood Food...
•
Answered
on Mar 15, 2022
•
271 views
Kenwood Major A717 Grease?
I use white food safe grease.
Here is an example; https://www.ebay.co.uk/itm/391996333570?epid=25018211366&hash=item5b44cd5e02:g:NlUAAOSwoeVdxAPv
12/6/2021 9:59:23 PM •
Kenwood Food...
•
Answered
on Dec 06, 2021
•
59 views
Not finding what you are looking for?