Goldstar DH504ELY6 Dehumidifier w/ 50 Pints Per Hour Capacity - Page 5 - Answered Questions & Fixed issues

If your Norpole dehumidifier is repeatedly starting and stopping, it could indicate a problem that needs to be addressed. Here are a few troubleshooting steps you can try:

1. Check the humidity settings: Ensure that the humidity level set on the dehumidifier is reasonable and not too low. If the desired humidity level is already reached, the dehumidifier may turn off until the humidity rises again.
2. Clean the air filter: A dirty or clogged air filter can restrict airflow and cause the dehumidifier to overheat. Turn off the dehumidifier, unplug it, and locate the air filter. Remove the filter and clean it according to the manufacturer's instructions. Allow it to dry completely before reinstalling it.
3. Check the water collection bucket: If the water collection bucket is full, the dehumidifier may automatically shut off. Empty the bucket and ensure it is properly positioned back into the unit.
4. Verify the drainage system: If your dehumidifier is equipped with a continuous drainage option, make sure the drainage hose is properly connected and not clogged. If the drainage hose is obstructed or improperly installed, it can cause the dehumidifier to turn on and off.
5. Ensure proper ventilation: Make sure the dehumidifier is placed in a well-ventilated area. Restricted airflow around the unit can lead to overheating, triggering the auto shut-off feature.
6. Power supply issues: Check the power cord and make sure it is securely plugged into a functioning power outlet. Also, ensure there are no issues with the circuit breaker or electrical supply.

If none of these steps resolve the issue, it's recommended to consult the user manual or contact Norpole customer support for further assistance. They will be able to provide more specific troubleshooting steps or advise on potential repairs or service options.

copy and paste link page 21, also in your manual. https://www.honeywellstore.com/store/images/pdf/honeywell-tp-series-dehumidifier-manual.pdf

Question edited to add full 'make model (what it is)'. Some models have a bucket, and some don't as it can be optional. Its capacity is 30 pints per day. The manual and the specs for the 3 models in the range are in the link. https://manualzz.com/doc/2052238/goldstar-dh3010b-dehumidifier-user-manual ..

Jay, Check here... https://www.appliancefactoryparts.com/airconditioners/everstar/mpn1-095cr-bb6.html#Hoses,-Valves,-and-Regulators Best to you.

Step 1: Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Step 2: Update the printer firmware Click here to know different methods of updating printer firmware. Step 3: Printing Documents You can resolve the error by canceling the print job, and then changing the print settings in the printing software.

• Frist, Press the Cancel button to cancel the print job or clear the error.
• Then, change the paper settings to match the loaded paper in the printer, Refer HP Printers - Printing Documents (Windows)

https://evaly.com.bd/products/baseus-hd-convex-blind-spot-auto-rearview-car-mirror-silver-8458491

Pause is not a term ive seen on a dehumidifier , but one would assume that its waiting for something to occur in that mode , and with these the only logicial reason to wait is to "wait" for Moisture to return to room , maybe your room has been voided of %rh to the setting on unit and its waiting for more water to return ??

Parts Suppliers. Replacing the sensor seems to be the fix. https://www.google.com/search?q=Noma+Dehumidifier+043-5795-6+Parts+sensor

You can find the manual for the Garrison dehumidifier model 043-5434-6 by visiting the manufacturer's website or by searching for it online. Here are the steps to find the manual online:

1. Open your web browser and go to the Google search engine.
2. Type "Garrison dehumidifier model 043-5434-6 manual" in the search bar and hit enter.
3. Several websites will appear in the search results. Look for a website that offers the manual for download or viewing.
4. Click on the link to download or view the manual.

If you are still having trouble with your dehumidifier even after consulting the manual, you may want to consider contacting the manufacturer for assistance or bringing the unit to a professional for repair.

There could be several reasons why the humidity reading on the digital control is not accurate. Here are a few things you can try:

1. Calibrate the hygrometer: The first thing to do is to make sure that the hygrometer you are using to measure the humidity is calibrated correctly. You can check this by placing the hygrometer in a sealed container along with a wet sponge or cloth for a few hours. The hygrometer should read close to 100% humidity. If it doesn't, then it may need to be calibrated.
2. Check the humidity sensor: The humidity sensor in the incubator may be faulty or dirty. You can clean the sensor with a soft cloth or replace it if it is damaged.
3. Check the water level: Make sure that the water level in the incubator is sufficient. If the water level is low, the humidity will be low as well.
4. Check the ventilation: The ventilation in the incubator should be set to allow for proper air exchange. If the ventilation is not set correctly, it can affect the humidity level.
5. Check the room conditions: The room conditions, including temperature and humidity, can affect the humidity level in the incubator. If the room is too dry, it can affect the humidity level in the incubator. You may need to adjust the dehumidifier or add a humidifier to the room to maintain the proper humidity level.

There are several reasons why your T2 Direct Dehum 3 dehumidifier may be alarming after running for a few seconds:

1. Dirty or Clogged Air Filter: A dirty or clogged air filter can cause the dehumidifier to overheat and shut down. Check the air filter and clean or replace it if necessary.
2. Defective Humidity Sensor: If the humidity sensor is defective, it may cause the dehumidifier to shut down. The sensor may need to be replaced.
3. Faulty Compressor: A faulty compressor can cause the dehumidifier to shut down after running for a short time. You may need to replace the compressor.
4. Low Refrigerant Charge: If the refrigerant charge is low, it can cause the dehumidifier to shut down. You may need to recharge the refrigerant.
5. Faulty Control Board: A faulty control board can cause the dehumidifier to shut down or display error messages. You may need to replace the control board.

It is recommended to contact a qualified technician to diagnose and repair the issue with your dehumidifier.

I have one that did the same thing. I had to raise it about 1-2 feet to get it to drain properly.

It sounds like your dehumidifier is likely experiencing an issue with the condenser. If the container was half filled, then it's possible that the condenser has become clogged due to a buildup of sediment or debris. To fix this, you should unplug the unit and remove the cover to check for any blockages. If there are any, then you can use a vacuum cleaner or compressed air to remove them. Additionally, you should also inspect the condenser for any signs of wear or damage. If the condenser is cracked or damaged, then it will need to be replaced. If you need further assistance, you can consult a professional technician for diagnosis and repair.

What does the user manual say about this?

Appliances like this have a motor that can run both ways and is push by the alternating cycles in the power supply. Sometimes you can retrain it by wearing heavy gloves and spinning it the right way as you turn it on. Leave it running for five minutes, switch off and back on before the fan stops. You can also contact Broan Nutone direct. https://www.google.com/search?q=broan+pm390-hs+blowing ..

i don't know. it is common for dehumidifiers to not collect water in cold weather. please consider obtaining a portable device that shows how humid the air is where your machine is located. i find 55 or 60 is suitable for my basement.

I have the same issue, all 4 wires have voltage for my connector, I would assume one would be ground but it seems that is not the case unless that is the issue. Black wire I would assume would be ground but it isnt. If anyone has a wiring diagram for these units I could figure it out but I can only go so far when you are operating in the dark.

dont know anything about a wheel chair lift, but why is it posted in dehumidifiers repair section?

'make and model' are needed in all questions please. However it appears to be Noma or Hisense. See videos and articles. https://www.google.com/search?q=Dehumidifiers+error+E9 ..