20 Most Recent Windchaser Stainless Steel Patio Heater 40,000 BTU by - Model PHS - Page 8 Questions & Answers

WHY DOES MR HEATER SHOOT A YELLOW FLAME AT IGNITION AND THEN BURNS BLUE. SCARES MY WIFE. IS THIS DANGEROUS. I TURNED DOWN MY FIRST ONE DOWN BECAUSE OF THAT. WE HAVE HAD THIS ONE FOR AWHILE.

Yellow flame means a 'not perfect' mix of gas and air. As long as it goes blue, then it's fine.

Propane heater with yellow flames and roars ' Hearth.com ...

www.hearth.com > ... > Main Hearth Forums > It's a Gas!

Jan 24, 2013 - We installed a comfort glow 50k vented propane heater for my mom. ... I went up yesterday and there was a fair bit of yellow/orange flames. ... burner & any misalignment will allow the gas to shoot out the side of the air shutter, ...

Is my new propane heater working right? - Canadian ...

forum.canadianwoodworking.com > shop-and-tool-safety

Not a heater for a non vented place. As for the flame being yellow, that comes from the air to gas mixture, not enough air and the flame will be ...

VIDEOS as well

https://www.google.com/search?q=MR+HEATER+SHOOT+A+YELLOW+FLAME

..

Heating &... | Answered on Dec 23, 2020

1 Answer

How to change pilot light switch

You can't unless you are a registered gas engineer.

It isn't a 'switch', it is a safety valve thermocouple :>)

Heating &... | Answered on Dec 23, 2020

0 Answers

Global Air model ASWH24TA4/SQCR1DI A/C. What does error code E5 mean?

Heating &... | Posted on Dec 23, 2020 | Be the first to answer

1 Answer

Can anyone suggest a replacement door handle for my 1986 LOPI Answer Premier Wood stove or a way to repair the top thread that is damaged?

The part is available here. Or you could weld a piece of steel rod to it and then re-thread it and put a new washer and nut on it. If only the thread is damaged, you could re-thread a smaller size and use a smaller nut

https://www.rockymountainstove.com/parts-and-accessories/lopi-stove-parts/answer-stove-parts/

..

Heating &... | Answered on Dec 22, 2020

1 Answer

Hi I just bought an onix a008g it doesn't cool anything.. fan mode is the same as cool.. ?

Onix portable air conditioner had ive coming from one of the side vents we throated it out and now the fan won't turn on

Heating &... | Answered on Dec 22, 2020

1 Answer

Comfort Zone cz488 mini oscillating heater. Why doesn't it turn on?

It's broken. You need to have it checked by an appliance technician or invest in a new one. You manual is here, page 4 has the maker details. It does have a 'tip over switch', on the bottom so make sure that is operational and pressed in. On soft carpet, it might think it is tipped. It also has over-heat protection. An engineer or a competent person with a test meter can check it.

https://www.manualslib.com/manual/1272393/Comfort-Zone-Cz488.html#manual

https://www.google.com/search?q=Cz488+heater

.

Heating &... | Answered on Dec 21, 2020

1 Answer

Hi, I have a Brivis ducted air con system with an NR-1 main board and getting error #59 phase fault. Can anyone help with what this fault means.

Could be a phase missing or two phases are wired the wrong way and the moror is trying to run backwards.

Heating &... | Answered on Dec 21, 2020

1 Answer

How do I order just a remote for my Whalen sf103-23d Combination Fireplace

Contact Whalen direct. Not available online, just Universals which are unlikely to work.

Fireplaces - Whalen Furniture

www.whalenfurniture.com > category > fireplaces

All of our fireplaces feature realistic flames and alternate flame colors. Enjoy the cozy comfort provided by the heater settings. Best of all, the remote control ...

Heating &... | Answered on Dec 20, 2020

1 Answer

Martin Industries gas logs. Why don't they ignite?

The logs aren't supposed to ignite, they are made of ceramic, are supposed to look pretty and glow a bit.

https://www.hearth.com/talk/threads/need-help-diagnosing-problem-w-martin-industries-gas-log-stove.136422/

Any gas appliance that doesn't light, even though the pilot is alight, is usually due to a failed thermocouple. You need a registered gas engineer.

Heating &... | Answered on Dec 20, 2020

2 Answers

Hi I have a Ferroli 31c and it has error code f13. In the manual this seems to indicate flue sensor fault. Is there anything I can do? Thanks

Determine whether it is a faulty sensor or truly a flue fault.

Heating &... | Answered on Dec 19, 2020

1 Answer

Flame is hitting log on end of pined in place log on end bend is this ok

try turning down gas regulator

Heating &... | Answered on Dec 19, 2020

1 Answer

I have a Modine 70,000 shop heater. 4 years old, Blows luke wrm air. Igniter works, gas comes on, blower works. I have checked and cleaned out the burners, Still the same. Thanks

check gas pressure

Heating &... | Answered on Dec 19, 2020

1 Answer

My Mr Heater MH12TS whistles loudly on low or medium setting. I shut it off and didn't try the high setting. The rivets are solid and tight. Is this dangerous? What else could be wrong?

sounds like burner tube or gas line has a leak or gas valve

Heating &... | Answered on Dec 19, 2020

1 Answer

Pilot will not light.. Troubleshoot

check for gas flow in tube if ok replace pilot generator make sure gas flow from valve

Heating &... | Answered on Dec 19, 2020

0 Answers

Lux thermostat hooked up to a boiler with 2 wires, one white one black and thermostat has jumper, why and what's the correct way to hook up

Heating &... | Posted on Dec 18, 2020 | Be the first to answer

0 Answers

Hunter 44378 thermostat. How can I remove the cover to replace the battery?

Heating &... | Posted on Dec 17, 2020 | Be the first to answer

1 Answer

Why does my central heating system stop before reaching desired temperature? NOT SOLVED HELP PLEASE

I am in Southern Ontario, it's freezing here!

Air duct cleaning helps.

Clean filters help. Perhaps the fan motor is getting lazy. Fan not spinning properly. Vacuum the slots in the fan.

Battery inside the thermostat makes no difference. If it works, it works. If your temperature is shy by 2'C, just set it to 24'C.

Heating &... | Answered on Dec 17, 2020

1 Answer

Want the Air tech hf 606c manual, please

https://qanswers.site/?q=air+tech+hf+606c+user+manual

Heating &... | Answered on Dec 17, 2020

9 Answers

Charmglow Electric Fireplace *NO HEAT just lights up, HELP :(

Take the fan power switch apart and clean the 2 point contacts. Also clean the 4 male studs that the wires plug into. That should solve the problem.

Heating &... | Answered on Dec 16, 2020

0 Answers

American Harvest 6100 multi-fuel furnace. How can I change fuel from corn to pellet?

Heating &... | Posted on Dec 15, 2020 | Be the first to answer

Not finding what you are looking for?

Popular Tags

8 questions posted

Ask a Question

Usually answered in minutes!

Are you a Windchaser Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Windchaser Stainless Steel Patio Heater 40,000 BTU by - Model PHS? Or just drag it here!

View Most Popular

Windchaser Heating & Cooling

Windchaser Heating & Cooling

need parts list sahara big burn patio

Heating & Cooling

20 Most Recent Windchaser Stainless Steel Patio Heater 40,000 BTU by - Model PHS - Page 8 Questions & Answers

WHY DOES MR HEATER SHOOT A YELLOW FLAME AT IGNITION AND THEN BURNS BLUE. SCARES MY WIFE. IS THIS DANGEROUS. I TURNED DOWN MY FIRST ONE DOWN BECAUSE OF THAT. WE HAVE HAD THIS ONE FOR AWHILE.

Propane heater with yellow flames and roars ' Hearth.com ...

Is my new propane heater working right? - Canadian ...

How to change pilot light switch

Global Air model ASWH24TA4/SQCR1DI A/C. What does error code E5 mean?

Can anyone suggest a replacement door handle for my 1986 LOPI Answer Premier Wood stove or a way to repair the top thread that is damaged?

Hi I just bought an onix a008g it doesn't cool anything.. fan mode is the same as cool.. ?

Comfort Zone cz488 mini oscillating heater. Why doesn't it turn on?

Hi, I have a Brivis ducted air con system with an NR-1 main board and getting error #59 phase fault. Can anyone help with what this fault means.

How do I order just a remote for my Whalen sf103-23d Combination Fireplace

Fireplaces - Whalen Furniture

Martin Industries gas logs. Why don't they ignite?

Hi I have a Ferroli 31c and it has error code f13. In the manual this seems to indicate flue sensor fault. Is there anything I can do? Thanks

Flame is hitting log on end of pined in place log on end bend is this ok

I have a Modine 70,000 shop heater. 4 years old, Blows luke wrm air. Igniter works, gas comes on, blower works. I have checked and cleaned out the burners, Still the same. Thanks

My Mr Heater MH12TS whistles loudly on low or medium setting. I shut it off and didn't try the high setting. The rivets are solid and tight. Is this dangerous? What else could be wrong?

Pilot will not light.. Troubleshoot

Lux thermostat hooked up to a boiler with 2 wires, one white one black and thermostat has jumper, why and what's the correct way to hook up

Hunter 44378 thermostat. How can I remove the cover to replace the battery?

Why does my central heating system stop before reaching desired temperature? NOT SOLVED HELP PLEASE

Want the Air tech hf 606c manual, please

Charmglow Electric Fireplace ***NO HEAT** just lights up, HELP :(

American Harvest 6100 multi-fuel furnace. How can I change fuel from corn to pellet?

Not finding what you are looking for?

Popular Tags

Ask a Question

Popular Products

Windchaser PAC9 Air Conditioner

Windchaser PACR10 Portable Air Conditioner

Windchaser Portable Air Conditioner

Windchaser PAC8 Air Conditioner

Windchaser PACR10000 Portable Air Conditioner

Top Windchaser Heating & Cooling Experts

Marvin

Brad Brown

Dennis Boxerman

Are you a Windchaser Heating and Cooling Expert? Answer questions, earn points and help others

Manuals & User Guides

Windchaser Heating & Cooling

need parts list sahara big burn patio

Charmglow Electric Fireplace *NO HEAT just lights up, HELP :(