20 Most Recent
Questions & Answers
How do I pick up
You need to call in to your phone wait for the answering machine to pick up and press # then input the pin you programmed into the phone. Go into the setup menu for the phone to program your pin.
Thanks, let me know if you need a manual for help, I may be able to track one down
10/7/2010 3:03:20 AM •
on Oct 07, 2010
Motorola phone MD7081 has eight phones with one
When you install a new battery, you need to place the phone (each one) in the base so it can sync up to the base stations radio signal.
Have you tried placing a phone in the base so it can sync up?
1/12/2010 2:23:48 AM •
on Jan 12, 2010
My mickey mouse touchtone phone
This may be your lucky day :-) If your MM is an early ATC model, you might be able to just REVERSE the red and green wires on the jack or base cord. Usually, the touch tone pad will make a little pressing sound but no tone comes out. Early TT pads were polarity sensitive and that's what we used to restrict dialing (yeah, remember phones USED to be hardwired into the jacks). Anyway, try that first. If the pad is really dead, you can probably order a replacement one for about $20, the labor and instructions to replace it will probably double or triple that.
If you find that it is not just polarized, pry up the faceplate and read the number on the side of the tone pad and post it here. It's probably a 35xxxxEPG or A!. I think I have a couple of those and the wiring diagram here.
5/22/2022 11:34:46 PM •
12 hours ago
Not finding what you are looking for?