20 Most Recent
Acer Keyboard for TravelMate 2300, 2410, 2480, 4400, 4500 Questions & Answers
Where can I find instructions on HOW TO open my
You have no ideea what the problem is, but there is a problem.... so you say. I can see that you have not any ideea abou what is inside one notebook, let alone repairing one. Let it be done by someone who know (at least about how to open and close the unit), else you can not only destroy it, but you can loose also informations and data from inside.
Want a mother board Cd and Audio Driver for acer
download from this link
http://www.acer.co.ae/acer/service.do?LanguageISOCtxParam=ar&miu10einu24.current.attN2B2F2EEF=3736&sp=page15e&ctx2.c2att1=24&miu10ekcond13.attN2B2F2EEF=3736&CountryISOCtxParam=MI&ctx1.att21k=1&CRC=4250700633
Keys do not work intermittently. Need to remove & clean.
Most travelmates have a couple of clips holding the keyboard in place, if you look at the top of the keyboard there is usually 4 clips that you can gently push back with a screwdriver. Just be carefull of the ribbon cable attached to the keyboard, don't yank it out.
Acer travelmate 2420
Hi,
1, check regional languages are set correct in the control panel, put yours to the top and save it.
2, update the Operating system
3, Run a full virus scan on it.
Should be good, if hardware ok.
Regards
Richard.
Mpowering technology pop up
Couldn't get rid of mpowereing technology pop up. Tried every solution offered by the internet. Finally I noticed when I powered up my computer the pop up showed up even before the computer loaded anything. I turned off the power to the monitor and powered it back up an viola, pop up gone. The Acer monitor had generated the pop up.
My Acer X1110 switches off as soon as blue light comes on?
it needs service, and service manuals are hard to find on anything by the likes of ACER.
this projector worked for 12 long years, did you own it 12 or bought a bad projector, no history told as I can buy dead projectors all day long. and hard nut problems even hacking done.
Acer X1110 data projector Standard throw projector..
did you know most projectors have serious grade protective devices inside??? (tamper and overheating are 2)
did you read owners manual page 32 yet, errors.
LED codes.?
there are 4 LED, and all 4 matter, projector turned (ON) (not one =1)
also in pairs glowing and also if blinking or not, so read page 32
it tells all that.
my guess is overheat failures, even cold, due fan slow or packed in lint after 12 years of use and no service done,.
https://manualzz.com/doc/49497108/acer-x1110-user-manual
some have dust filtler
a shop first cleans is out first, and check fan RPM with and LED tachometer.
this is all SOP.
''e'' button :acer empowering technology
That button can be set using the utility on your programs list
It maybe that you accidentally turned it off or set it to do some other task.
Start there first before re-installing the program that sets it.
That is on one of the cds that should have come with it and can be installed by itself.
Not finding what you are looking for?