20 Most Recent Brother DCP-135C Flatbed Digital MFC All-In-One InkJet Printer - Page 8 Questions & Answers

Ghosting on machines can be one of several causes.

1. Poor Quality/ Damp toner - Replace the toner cartridge
2. Worn Drum Unit - Replace the Drum Unit
3. Fuser Unit Failing - Replace the Fuser Unit (Normally more than the printer is worth).
4. Damp Paper - Open a new ream of paper and try printing again (This is the cheapest option to start with diagnosis).

Magenta Print-head may be blocked. Depending on the model of machine. Either on the Menu on the printer find Ink Management or press the Ink Management button. Print a Test Page If no Magenta Dots showing then proceed to Cleaning and Clean the print-heads through the proceedures given on the machine. Print another test page. If Magenta Dots are fine then cleaning done. if not then try cleaning again. If still not fine then the machine will need to be cleaned professionally which will cost a reasonable amount. Most service fees are more that it is to replace the printer.

Pull out the paper tray. Lift the cover of the tray. Slide paper into the tray. Close the cover of the tray. Push the tray back into the machine till it clicks into place.

This machine uses a Reset Gear to instruct the printer it has a new cartridge. The Starter Cartridge that comes with the machine does not have this gear attached to it so refilling the cartridge without installing and resetting the gear will not allow you to print normally. If you are using a store bought cartridge that you have since refilled you can reset the gear to tell the printer it is a new cartridge.

Go to the Brother Website for your region. Find the Downloads section. Put in the details of your machine and search for the appropriate downloads for your machine. Download the Drivers, Manual etc from there. Some of the regions may even offer to sell you a CD with all the downloads on it. But just download what you need.

windows make loads of hardware errors, if it is not being picked up by the computer but the printer is turning on check it has not been installed as with the same name but a number after, if so select that for printing if not try plugging the usb lead from the printer in to a different socket on the PC. hope that helps ma

You can get third party software in order to avail the facility to combine pdf to a single file

I am a Brother employee working for the software technical support department. We have drivers available for the DCP-J132W posted on our solution site. http://support.brother.com/g/b/producttop.aspx?c=eu_ot&lang=en&prod=dcpj132w_eu Brother Software Technical Support http://www.brother-usa.com DCP J132W Others Brother Solutions Center

check da scanning unit

The printer or the drum/toner unit may cause the grinding or clicking noise.

1. Power off the printer and open the front cover.
2. Remove the drum/toner unit and close the front cover.
3. Power the printer back on.

If the grinding or clicking noise dose not occur when the drum/toner unit is removed from the printer, then the drum/toner unit is the cause of the noise. Install a brand new drum unit and/or toner cartridge may be necessary to stop the noise. Still having Problem Then follow Us For Brother Printer Support