20 Most Recent Lanier 1205 Copier Questions & Answers

Lanier 5618 is not a Network Copier. However, it may be installed on one PC and shared from there. Drivers are available from LANIER Official Support

Hope it helps! Good Luck! Thanks for using Fixya!

Lanier 1205... | Answered on May 25, 2019

Ours Lanier 5618 has a network adapter , finally succeeded to setup via it by : "add printer wizard" , after choosing 'Standard TCP/IP Port' ; we choose " Ricoh Generic Network Printer " instead of "Generic Network Card" at 'Dvice Type' .......

Lanier 1205... | Answered on May 23, 2019

The problem in the fuser unit.Check and clean the rollers ,thermistors,thermofuses.

Lanier 1205... | Answered on Apr 17, 2012

Sounds like you need a new cleaning blade. It is located inside the process assy behind the drum.

Lanier 1205... | Answered on Dec 01, 2011

If you say that you see old ghodt copies the problem is with the Fuser Roller in the Fusing Unit.
If this is right i advise you to call a Tech (if you do not have the skills to change it)

See you!

Lanier 1205... | Answered on Sep 02, 2011

Why did you change the fotoconductor Unit???? This part of the machine is to create the image.
Your problem is in the tray. Meaby a broken switch. Take out the all tray and look inside to see if there is same obstruction.
If you do not see anything i advise you to call a Tech.

Dont waste more money if you dont know what your doing. This is the best advise i can give you.

See you!

Lanier 1205... | Answered on Aug 31, 2011

Could be an error code, is there a number preceded by an sc displayed on the panel?

Lanier 1205... | Answered on Aug 06, 2011

I suppose that it is a printer.
In this printer the toner waste goes to the Transfer Unit.
Open the right door and you will see the trasfer unit. You have to take it out and open it. Then just empty it to a bag.
Take a look at this picture


Lanier 1205... | Answered on Jul 21, 2011


For your in formation, the waste toner bottle locates at the back side of the printer. Just go to the back side of the then open the back panel of the printer and you will find the waste toner bottle there.

Lanier 1205... | Answered on Jul 21, 2011

I am not 100% sure but i think you can calibrate your touch panel.
Follow this steps:
- Press yellow key.
- On the key pad press 1999.
- Press Red Key five times.

After that you will see the option to calibrate your panel. You just need to follow the wizard.

If you have any dought reply to me.

See you!

Lanier 1205... | Answered on Jul 17, 2011

It is not seeing tray in the machine. Might be a piece of paper stuck behind the tray stopping it from going in and stopping it from detecting the tray?

Lanier 1205... | Answered on Apr 04, 2011

It could likely be the drum. Is the line on copies and prints, or just copies? If it's just on copies, it's not the drum.

Lanier 1205... | Answered on Feb 15, 2011

try this:

1. Press the clear mode key (yellow key)
2. Use the keypad to enter "107"
3. Old down clear/stop for at least 3 secunds. (red key)
4. Enter the service mode.

5. Exit all the way and turn off.

6. Turn ON

And thats it

Lanier 1205... | Answered on Jan 22, 2011

Not finding what you are looking for?
Office Equipment & Supplies Logo

Popular Tags

66 questions posted

Ask a Question

Usually answered in minutes!

Top Lanier Office Equipment & Supplies Experts


Level 3 Expert

13434 Answers

Brad Brown

Level 3 Expert

18342 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Lanier Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Lanier Office Equipment & Supplies

  • Lanier Office Equipment & Supplies

Most Popular Question

paper coming out

  • Office Equipment & Supplies