Dell PowerEdge T300 Server - Answered Questions & Fixed issues

Use GOOGLE and SEARCH for:

First Search for:

Dell PowerEdge T300 Server list of Error codes

(12,600 hits)

then search for:

Dell PowerEdge T300 Server Error code "2900-0325"

(You will find 40 'hits')


Dell PowerEdge... | Answered on Dec 15, 2017 | 955 views

Windows 2000 is not supported on this machine. The closest you could get is using a hypervisor XenServer or VMWare ESXi and then installing Windows 2000 on a virtual machine.

Dell PowerEdge... | Answered on Sep 26, 2016 | 247 views

Sounds like you're running into a security limitation. Firewall, etc... Corporate software is perhaps blocking the request for that site.

Honestly? I'm not really clear on the situation as your question is poorly constructed.

I'm guessing this is too old to be an issue at this point, however.

Dell PowerEdge... | Answered on Jun 13, 2015 | 75 views

He shows you how to open the server then you should see the memory.

Dell PowerEdge... | Answered on Oct 14, 2014 | 163 views

The e1410 is an error that is reporting an interruption to the CPU processes. It isn't identifying an issue with the processor specifically, it is just saying its processes were interrupted. Normally when you see the E1410 you will see another error listed with it in the hardware log. Do you see any other errors in the log? Also, what is the BIOS and Drac versions at currently? I ask because the server being very out of date can cause issues like this as well.
Let me know what you see.

Dell PowerEdge... | Answered on Sep 04, 2014 | 1,041 views

Your corporate Firewall is denying access. I don't know what this site is or does, but you can put in a request to allow access with your IT guy or use it at home.

Dell PowerEdge... | Answered on Jan 22, 2014 | 85 views


Dell PowerEdge... | Answered on Aug 13, 2013 | 29 views

It's one of two things, you have something loose and your fan is rubbing on rubber in there, you just need to take it apart use some air duster and dust it out and see if anything is rubbing or second option is that your power supply has gone out completely and will need to be replaced.

Dell PowerEdge... | Answered on Jul 24, 2013 | 95 views

Verify size and type off memory. Also the slots used are a variable. There should be DIMM configuration table on the removable panel or better yet look for the manual.

Dell PowerEdge... | Answered on Mar 28, 2013 | 1,212 views

You can try first enabling it from device manager if still not being enable you will need to enable it from your BIOS.

Dell PowerEdge... | Answered on Mar 18, 2013 | 131 views

First, go to Dell's website and update all the firmware and install the latest version of Dell Server Administrator. DSA has logs information not logged by Windows. Next, take it outside and blast the fans with compressed air, make sure all components and cables are properly seated in their slots/sockets, turn it on with the cover off and make sure all the fans are spinning. Many servers will increase the fan speed if they detect the cover is off so this is another possible cause to the problem.
Finally, Dell servers have lifetime support, this number should work: (800) 945-3355
Good luck!
BTW: A temporary workaround might be to use a network controlled outlet that you can remotely turn off and on. Your UPS might be able to turn outlets on and off or you could get a stand alone network controlled outlet. Some can actually ping the device and turn power off and on again if it stops replying to pings. (E.g. IP Power EV-9255 IP

Dell PowerEdge... | Answered on Mar 06, 2013 | 333 views

BIOS must see the optical drive. Re-seat / attach drive if it does not. The other option is to use another drive.

Dell PowerEdge... | Answered on Jan 14, 2013 | 157 views

Disassemble Components an Clean the System with Air blower,
& Assemble Components Check it

Dell PowerEdge... | Answered on Dec 20, 2012 | 2,062 views


I will assume you are trying to connect to another desktop from the server... You may need to setup share properties on the desktop to access it from the network. If you are using VM software on the server and having this issue, you need to reconfigure the VM setting for your user access level.

Good Luck

Dell PowerEdge... | Answered on Dec 24, 2011 | 59 views

If your Dell server cam with the Windows Server 2003 software, you should be able to order a replacement cd. Go to If the software was not packaged with the server, you will have to buy it at

If you have any additional questions contact me by clicking on the "Add a comment" link located under your problem description on FixYa. Also, if you believe that this information was helpful to you, please rate my solution using FixYa's "Solution Helpful" rating scale.
Best regards,

Dell PowerEdge... | Answered on Jun 23, 2011 | 713 views


According to u I understand that the hard disk of your Power edge is faulty & need to recover the data.

You don't have say the exact problem of your hard drive. If your hard drive detect in your system Bios but you can't access Data or OS from safe mode also then try to format only the OS drive or repair the drive with your server OS CD. If you get perform it well then you can recover your data by transferring data to another external drive.

If The Hard drive doesn't detect then first try to change the cables (Data & Power)of the Hard drive. If detect it then try to access it or perform the previous job.

For detection of the Hard drive you can try to attach this drive to another system in slave or as secondary drive. If detect then you can recover data.

If your hard drive get crashed then use data recovery CD to recover data. Insert disk, install software, and recover the data by follow the option of the software.

This software is available in market.

Have another process to recover data from a crashed Hard drive. It is freezing but try it carefully. Place the hard drive into a baggy, seal it tightly and put it in the freezer overnight.The next day remove it from the baggy and put it in the external drive case.

Transfer the data from the drive before it warms too much and crashes again.

Dell PowerEdge... | Answered on Jan 27, 2011 | 2,374 views

You will need the drivers for them i had a similar problem
insted of reinstalling windows i got a very old taty keyboard and mose from a windows 95 pc
and used them till i got and installed the drivers for them.


Dell PowerEdge... | Answered on Dec 27, 2010 | 373 views


The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.


Dell PowerEdge... | Answered on Sep 27, 2010 | 186 views

The server should have came with an OpenManage CD.
You boot to the CD and it walks you through setting up arrays and installing the OS.
If you don't have the CD you can download it.
Go to Drivers and Downloads and enter your server's Service Tag.
Dell servers have lifetime phone support so give them a call if you need more assistance. (800) 945-3355

If this helps please vote for my solution.

Dell PowerEdge... | Answered on Sep 03, 2010 | 243 views


This stop code, "0x0000000A irql_not_less_or_equal" normally refers to a driver problem. So this is one of the few times where the files that the BSOD lists actually is important. Next I would try to boot the computer into safemode and reinstall/drivers related to that file to see if this make a difference.

Let me know if you have any more problems or questions


Dell PowerEdge... | Answered on Sep 03, 2010 | 401 views

Not finding what you are looking for?
Dell PowerEdge T300 Server   Logo

Popular Tags

38 questions posted

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers


Level 3 Expert

1997 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides