Top 20
Soyo 26 in. LCD TV - Page 7 Questions & Answers
Why does my show green light then red light the whole time when i switched it on
It indicates that the TV is not receiving enough power to operate normally.
- The power cord or outlet might be faulty or loose. Try plugging the TV into a different outlet or using a different power cord. Make sure the cord is firmly connected to the TV and the outlet.
- The TV might have a blown fuse or capacitor. This would require opening the TV and replacing the damaged component. This is a risky and complicated procedure that should only be done by a qualified technician. Do not attempt to do this yourself unless you have the necessary skills and tools.
- The TV might have a software glitch. Try resetting the TV to its factory settings by following these steps:
- Turn off the TV and unplug it from the power source.
- Press and hold the power button on the TV for 10 seconds.
- Plug the TV back in and turn it on.
- If the TV shows a menu, select the option to restore factory settings. If the TV does not show a menu, repeat steps 1-3 until it does.
How to pairing Ruwido Amadeus R 9710 to tv?
To pair your Ruwido Amadeus R 9710 remote to your TV, you can follow these steps:
Insert Batteries: Your remote is powered by two 1.5 V AAA batteries1. Make sure to insert the batteries correctly.
Switch on your TV: Ensure your TV is turned on.
Press the TV key: Press the TV key on your remote control for approximately 4 seconds until the LED flashes twice.
Enter the Code: After seeing the 2 flashes and within 5 seconds, enter the 3-digit numerical code from the list provided with your remote2. After entering the code, the LED will flash twice indicating that the code has been accepted.
Test the Remote: Point the remote control towards your TV and press the key. If your TV does not respond by going into Stand-By mode then repeat steps 3 to 5 and enter the next code in the list.
Bed.-Anl. H2 Version1 (ruwido.com)
Not finding what you are looking for?