20 Most Recent Sanyo DP26648-R 26 in. LCD TV Questions & Answers


Electro help
Try this site to get more details about the repair tips.

Sanyo DP26648-R... | Answered on Nov 14, 2014


likely a mainboard or power supply capacitor issue.
if you have the soldering skills fix it, otherwise time to replace the TV.
If you can de-solder and solder in new capacitors make sure you are using high quality capacitors be very causious of capacitors purchased from auction sites.

Sanyo DP26648-R... | Answered on Apr 30, 2014


many tvs were plagued by bad capcitors on the main board and/or power supply.
if you are comfortable with soldering go for replacing the capacitors. if not it is not worth having repaired, cheaper to replace the tv.

Sanyo DP26648-R... | Answered on Apr 30, 2014


change your device cables or try to put at a pc to check if isworking your pc

Sanyo DP26648-R... | Answered on Dec 15, 2013


Setup codes to check with Sanyo brands are 004/ 013. If you wish to get more details about four digit and five digit codes, check this link. There is setup code list to many brands of remote controls. Just see and check which brand has setup code to Sanyo. It will make you remote selection easy. There is an other link. Check this too.

Sanyo DP26648-R... | Answered on Feb 20, 2013


Looks like the display has developed some problem. Try changing the input device to some other like a DVD player, VCR etc. If the problem persists, this might require attention by a qualified service technician.

Sanyo DP26648-R... | Answered on Jul 15, 2012


You may have dying 24vdc power supply or backlight inverter board, check the voltages first.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.

Sanyo DP26648-R... | Answered on May 04, 2012


Check its T'Con board. This is a common fault to all type of LCD TVs

Sanyo DP26648-R... | Answered on Apr 03, 2012


the problem is on inverter board..Please replace it to fix your TV..it is not expensive..

Sanyo DP26648-R... | Answered on Mar 10, 2012


At least look at the main AC fuse (F1) in the power supply module, and also look to see if any of the MOV's has blown.

If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Parts: www.interliquidparts.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Sanyo DP26648-R... | Answered on Jul 04, 2011


Press the reset key on the remote twice in a row this will reset the tv to the factory defaults. Link to the manual

Sanyo DP26648-R... | Answered on Mar 08, 2011


Hi,
Your problem is the T-con board. This is gone bad/faulty. I would advice you to replace it with new T-con board and your unit will back to normal again. You may look for the replacement online. Try ebay.com or shopjimmy.com.
Hope I helped you.
Have a nice day!
Thanks for using Fixya.

Sanyo DP26648-R... | Answered on Feb 16, 2011


Look on the side/back of the set for the control buttons. Try them. If they work, then you can do a quick check of the remote by;
Get a digital camera (turn on) and point the remote at the lenses.
If you see a flash on the lcd display, the remote is giving a signal and the problem is probably in the remote sensor on the set.
If you do not see a flash the remote may need new batteries.
No camera? check the batteries anyway.

Sanyo DP26648-R... | Answered on Feb 13, 2011


ok i have come acrost this problem with my ps3
turn the ps3 off plug all the cables in right and put the tv on the right video input now hold down the power button on the ps3 for about 30 - 60 secs or untill it beeps or you see it working 
let me know if it works
PLEASE RATE thanks

Sanyo DP26648-R... | Answered on Jan 24, 2011

Not finding what you are looking for?
Sanyo DP26648-R 26 in. LCD TV Logo

89 questions posted

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76280 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sanyo Televison & Video

  • Sanyo Televison & Video

Most Popular Question

screen blacks out few seconds comes

  • Televison & Video
Loading...