20 Most Recent Initial HDTV-320 32 in. LCD TV Questions & Answers

The sound keeps going on and off.

Hi Gregory, Defective speakers often behave in this manner. Please have them checked.

Read full answer

Initial HDTV-320... • Answered on Jan 13, 2016

Need remote codes for INITIAL flat screen tv

028,029,0291,0285. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box. http://electronicshelponline.blogspot.com/ http://remotesearch.blogspot.com/ http://electro-medical.blogspot.com/ http://electrohelponline.blogspot.com/

Read full answer

Initial HDTV-320... • Answered on Feb 02, 2015

1 Answer

How do I get my tv out of standby mode

Be the first to answer

Initial HDTV-320... • Posted on Oct 13, 2014

0 Answers

What can make the screen go black on a Initial HDTV-320, there is no prolbem with the sound?

It is usually the sustain driver board that powers video. I'm looking for one now for my Samsung. Best thing to do is replace it if you can find one on eBay. They are easy to replace. You will need your old board part number and model of TV, use only the exact matching board part# or you may create a fire or electrical hazard. Always wear gloves, capacitors hold voltage for a couple of days. If bare skin touches one that still has a charge you will know it. I’m happy to help further over the phone at https://www.6ya.com/expert/david_c087e4b7d13c0163

Read full answer

Initial HDTV-320... • Answered on May 24, 2014

1 Answer

No signal for HDMI or DVI

Hi, what device or devices have you tried to connect through those ports? Were they working prior to this problem?

Read full answer

Initial HDTV-320... • Answered on Mar 29, 2014

1 Answer

Fuente e59670

Be the first to answer

Initial HDTV-320... • Posted on Nov 11, 2013

0 Answers

I have a Initial HDTV-260. In Digitial mode, two

Be the first to answer

Initial HDTV-320... • Posted on Oct 29, 2013

0 Answers

DVD Stuck

Be the first to answer

Initial HDTV-320... • Posted on Oct 07, 2013

0 Answers

Snow on screen but menu appears ok

how to solve agc voltage

Read full answer

Initial HDTV-320... • Answered on Sep 26, 2013

1 Answer

WHEN TURNING ON TV THE RED STANDBY LIGHT COMES ON AND STAYS ON BUT THE TV WONT COME ON....IT WAS WORKING TWO DAYS AGO

Be the first to answer

Initial HDTV-320... • Posted on Jan 02, 2013

0 Answers

Need a code for initial HDTV-32

Be the first to answer

Initial HDTV-320... • Posted on Oct 18, 2012

0 Answers

How do i put it to play dvd player

Turn off and unplug the HDTV set and the DVD player before attempting to connect component cables to them.

Match the red, green and blue colored cables to each of the color-coded counterparts on the back of the DVD player. Be sure the cables are being plugged into the TV-out section of the DVD player.

Plug the other end of the color coded cables into the HDTV set. There should only be a red, green and blue cable being plugged into the TV. It does not matter what input these cables are plugged in, but keep track of which particular one it is. Most HDTV sets will have more than one A/V input, which is why it's important to take note of where the component cables are located.

Power on the DVD player and the HDTV set. If not already plugged in, ensure both of these are properly plugged into an outlet.

Press the "Source" button using the HDTV remote and locate the input channel that has the component cables plugged into it. The HDTV set should now show the DVD player logo or an introduction to the DVD.

Car Tuning

Read full answer

Initial HDTV-320... • Answered on May 24, 2012

1 Answer