20 Most Recent Emerson LC320EM9 32 in. LCD HDTV - Page 9 Questions & Answers

Click here to get more details.

Press Program > and Program< buttons on the front panel of the TV simultaneously for more than 3 seconds.

if you don't have an idea in electronic repair i suggest to send it in trusted tv service shop. since replacing an lcd monitor is not easy you must considered something not to be damaged too. besides you can not get the same replacement in local store.

Setup codes to check with Emerson TV are: 0004 0009 0044 0135 0049 0051 0189 0053 0147 0039 0130 0227 0233 0250 0252 0254 0257 0265 0266 0310 0325 0456 0040 0041 0042 0021 0023 0024 0179 0045 0025 0027 0030 0032 0034 0035 0037 Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Check the CCFL lamps for weak emission.

If its dead and no sound what so ever its usually the power board and if so you can usually get replacement boards by contacting the people over at www.tvrepairworld.com if its not listed they most likely still have it and you can check by hitting the contact us button on their website and letting them know your model number and symptoms and a tech for your model will respond quickly to your inquirery as long as you include your model number and symptoms of the set.

yes your tv includes a digital tuner if you plug something in to the coaxial port you will be able to get a digital signal.

The main system memory IC has damaged. check and replace it. It can be located very near to main system control IC [an 8 solder terminal, small IC]. Even though it is very small in size, function to it when the set works is great. Work is a semi-skilled one. sometimes you might have to enter its service mode options to reset the mew memory IC. If such need occur, visit this site, named Electro-help. Check this link, and select the site.

Digital processor board has the fault. Your TV need a detail checkup. Contact any expereinced service technician.

Good day!!!That problem is usually cause of faulty capacitors on the power supply board..Just follow this instruction to fix your TV..1. Open the back cover of your TV.2. Look at the power supply board..Its normally connected to the power cord..3. After that,,try to look at the actual image of capacitors if it is bulged on the top so that you can easily determine the bad capacitors..4. After that,,try to replaced the bad capacitors using soldering iron and soldering lead..replaced the capacitors only with the same type ratings and value..5. Some of the capacitors not bulged so its better if have a capacitance meter

If you have back light the problem is T-con board however if no back light the problem is inverter board

I've tried calling these other numbers and no one will answer or call back my tv still has awarrentee. And would really like to get it fixed

Check its main power regulator board for fault. Replace it as card basis.

With digital OTA TV signals, a lot of things could cause you to fail to pick up a signal on any channel. First, do you have an indoor or outdoor antenna and how far are you from the transmitters for you local stations? Digital signals are either enough to for the tuner to interpret or you get no signal. Next check that the antenna is pointing at your stations' transmitters. Use antennaweb.org or tvfool.com to check the direction for your location. Antennaweb assumes an external antenna and provides a very conservative list of stations. Check for buildings, hills or tall trees that might block the signal to your location. If your antenna is providing a signal to several TVs, try a direct connection (taking out the splitter). You may need an amplified splitter to minimize the signal loss. Note: amplifiers (whether at the splitter or part of the antenna) can fail and become signal filters (blockers) instead. The direct connection tests this as well. If another TV does pick up the signal from the antenna (at this point), then the tuner may have failed. It may also just be a weaker tuner compared to the other TV. Surges (for example, lightning strikes) can cause a tuner failure. In that case, you need a new tuner. (a stand-alone tuner like the converter boxes might work) or try a site like shopjimmy.com, searspartsdirect.com or partstore.com. SearsPartsDirect lists the tuner here: http://www.searspartsdirect.com/partsdirect/part-number/Emerson-Parts/Television-Parts/UTUNATSSP006/0057/528/Model-LC320EM9/0352/0333600?keySuffixId=NA&pathTaken=partSearch&pathRender=modelComponent&documentCompId=50034435&diagramPageId=00001&productTypeId=x&searchModelNumber=LC320EM9&subCompDesc=Lcd%20tv&brandDesc=EMERSON&modelDesc=LCD-TELEVISION&blt=11&shdMod= .This TV was made by Funai so you may see other TVs that use the same part.I hope this helps. Cindy Wells (I have two TVs with different quality tuners. With one, when the antenna shifts slightly out of place, I can lose the ability to tune in the channels from the closest transmitters. The other TV does not lose the signal until the antenna rotates more than 90 degrees from its usual position.)

I would suspect an issue with the power supply board, maybe even puffed up filter caps on that board---that is the place to begin.

The set MAY have some adjustments for this but I doubt they will help here--unless an aspect button helps you are out of luck as far as I know.Emerson is not an easy company to get assistance from but you could try that also.