20 Most Recent Motorola Spirit GT Pro (2 Channels) 2-Way Radio Questions & Answers


Here is a link to the operator's manual for the Spirit GT: http://www.motorola.com/mdirect/manuals/Spirit_GT_User_Manual_E.pdf

You will find programming instructions on pages 12-13.

Best regards.

Motorola Spirit... | Answered on Nov 20, 2009


We agree, it does take some patience to program this model of radio. However, it is do-able. You need to program both the Frequency and the Code. If you set your code (the smaller number), it should eliminate interference from other users. If not, switch to a different set of numbers until you find a clear frequency in your area. Here is a link to the user guide: http://www.giantintl.com/RadioPDFs/Outdated%20Manuals/T5XXX_User_Manual_E.pdf

On the issue of static. Static is usally caused by using a bad, defective or poorly charged battery. This model of radio has not been offered for several years. It is likely you have batteries which need replaced. Your local Motorola dealer should be able to get the batteries for you. Or purchase from an online Motorola vendor.

Best regards.

Motorola Spirit... | Answered on Nov 08, 2009


Spirit GT: Programming a Frequency to a
Selected Channel:
1. Press and hold down the Push-To-Talk
button while turning the radio on, wait for
approximately 5 seconds then release the
Push-To-Talk button.
2. Use Scroll button to select one of the 8
frequencies.
3. On a Spirit GT+, press the Monitor button.
4. The current channel will flash, press scroll
button to change channel.
5. After the second channel is selected, press Monitor button again, current
frequency for second channel will flash. Figure 16.
6. Use Scroll button to select new frequency.
Exit Programming Mode - 3 Ways
1. Press Push-To-Talk to exit completely.
2. Allow the Menu time to expire (10 seconds).
3. Press Menu button to go to code programming.

Here is a link to the user manual: http://www.motorola.com/mdirect/manuals/Spirit_GT_User_Manual_E.pdf

Motorola Spirit... | Answered on Jul 18, 2009


Programming a Frequency to a
Selected Channel:
1. Press and hold down the Push-To-Talk
button while turning the radio on, wait for
approximately 5 seconds then release the
Push-To-Talk button.
2. Use Scroll button to select one of the 8
frequencies. Figure 16.
3. On a Spirit GT+, press the Monitor button.
4. The current channel will flash, press scroll
button to change channel.
5. After the second channel is selected, press Monitor button again, current
frequency for second channel will flash. Figure 16.
6. Use Scroll button to select new frequency.
Exit Programming Mode - 3 Ways
1. Press Push-To-Talk to exit completely.
2. Allow the Menu time to expire (10 seconds).
3. Press Menu button to go to code programming.

Here is a link to the user manual: http://www.motorola.com/mdirect/manuals/Spirit_GT_User_Manual_E.pdf

Motorola Spirit... | Answered on Jun 26, 2009


You are correct, the battery is bad. When batteries begin to fail, they may appear to hold a full charge, but when put under a load they fail to maintain the proper power to fully power the radio. Generally you will notice screens going blank, poor or no transmit, etc. Simple solution, replace the battery. New batteries are available for around $30 (US dollars).

Motorola Spirit... | Answered on Mar 17, 2009


Long press P3 and check key sign will be goes OFF, now your keypad is unlock.

Motorola Radio... | Answered on Nov 03, 2019


Hi there,

please, try long press P2 button, to unlock your radio,
and re-try,

Thank you,


With Regards,
jack

Motorola Radio... | Answered on Nov 03, 2019


It requires the radio programming program. You must take it to a dealer. It will cost a bit to be reprogrammed, call in advance.

Motorola Radio... | Answered on Oct 04, 2019


Entering Front Panel Feature and Button
Configuration Mode
If your radio is turned ON, turn it OFF. Press and hold the side
programmable button 1, and turn your radio ON. A tone is
heard, indicating that your radio is in Feature and Button
Configuration Mode. The indicator illuminates and the
"BCKLIGHT" is displayed on the radio LCD screen.

Whenever the radio is turn on, it initiates a self-test routine which checks the RAM, EEPROM
hardware and EEPROM checksum. If Self Test passes, the green LED flashes once and a Self-Test
Pass Tone is generated. If unsuccessful, the red LED flashes rapidly and a Self-Test Fail Tone is
heard

You may need the programing software to do the reset the manual does not give you any info on resetting the radio

Motorola Radio... | Answered on Oct 03, 2019


No. Your Talkabout radio operates on UHF and your wife's walkie talkie is a VHF radio operating on exclusive business frequencies.

Motorola Radio... | Answered on Sep 26, 2019


Hi PC Bedwell, check the battery charge, it may be needing to be replaced, likewise, control the charger
I hope you can solve the problem
Regards Franco Dosil

Hola PC Bedwell, comprueba la carga de las bater?as, puede estar necesitando ser reemplazadas, de igual manera, controla el cargador
Espero puedas resolver el problema
Saludos Franco Dosil

Motorola Radio... | Answered on Sep 20, 2019


Check your Private Line (aka interference eliminator code, tone code, PL, quiet call). It sounds like you have one radio set with a PL setting and the other one is open squelch (no private line). All settings for frequency and PL code need to be the same between the two radios.

We don't have a manual for the T3, but I am attaching one for the T5, which may be similar. http://www.motorola.com/web/Business/Products/Two-Way%20Radios%20-%20Unlicensed/_Documents/TLKR-T%20series/Static%20Files/T5%20Manual%20EU.pdf

Best regards.

Motorola Radio... | Answered on Aug 31, 2019


The CLS has preprogrammed frequencies. The Bao can be user programmed. If both are Uhf, the Bao must match the CLS unless one of the CLS frequencies is already in use in the Bao. So, are you already using CLS and adding radios? You need the actual frequency and tone code. If you do not understand, contact a dealer like us, local is even better! Channel 1 is only an indicator, not a frequency. [email protected]

Motorola Radio... | Answered on Jun 16, 2019

Not finding what you are looking for?
Motorola Spirit GT Pro (2 Channels) 2-Way Radio Logo

Popular Tags

5 questions posted

Ask a Question

Usually answered in minutes!

Top Motorola Radio Communications Experts

Anthony Ward
Anthony Ward

Level 2 Expert

397 Answers

Ekse

Level 3 Expert

13434 Answers

Gene Pitts

Level 2 Expert

159 Answers

Are you a Motorola Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Motorola Radio Communications

  • Motorola Radio Communications

Most Popular Question

radio cuts out screen goes blank when

  • Radio Communications
Loading...