20 Most Recent
Dynex DX-WC100 Webcam - Page 5 Questions & Answers
How do I get the channel on the router changed to channel 11, which is what Roku advises that I need to avoid the inteference preventing from set up of my device?
You have to address the router box. And enter the setup page. How ?????.
First write down the router brand and model number. Also the MAC address which is important.
Then go online and check with the manufacturer or Internet in genral .
ask how . "How do I address router (manufacturer)(model #). To enter setup.
you are looking for a number formatted like (196.256.0.1) . If you then check manufacturer or Internet in general for intrusions to sign on to set up. As most boxes require a username like (admin)
And password (12345 , or abcd..)
You then look over the different pages and one will be channel assignment. Once you select it to the one you want then save the setting. The same menu let's you change the network "ssid" AND THE LOGIN USERNAME AND THE PASSWORD. IF YOU CHANGE ANYTHING WRITE IT DOWN FIRST THE CHANGE IT. AS ONCE DONE YOU NEED THE INFO TO GET BACK IN.
ALSO NOTE THERE IS A BUTTON OR A HOLE THAT YOU PUT A PAPER CLIP INTO THAT RESETS THE ROUTER TO FACTORY SETTINGS IN CASE YOU DO NOT HAVE THE PRESENT USERNAME AND PASSWORD .OR THEY WERE SET BY SOMEONE ELSE. YOU CANNOT RUIN THE BOX BY TRYING AS YOU CAN RESET IT AGAIN. BUT EVERY CANE TO
LOGIN PASSWORD MUST BE DONE TO ALL COMPUTERS THAT SIGN ON WIRELESSLY.
IF YOU POST THE NAME ANDODEL NUMBER I COULD GIVE YOU EXACT INSTUCTIONS. HOPE THIS HELPS. IF IT IS A CABLE COMPANY ROUTER THE SERIAL NUMBER OF THE UNIT IS THE PASSWORD TO SIGN ON THE WIRELESS NETWORK. IF IT IS A MAJOR BRAND THEN YOU WILL FIND ALL YOU NEED ON THEIR WEBSITE I HAVE OWNED VIRTUALLY EVERY MAJOR BRAND AND ONLINE INFORMATION AND BOX SPECIFIC INTRUSIONS ARE AVAILABLE. BE CONFIDENT. LEARN A NEW THING THIS WEEK.
(
How do I connect a wireless head set to a Dynex Television Model DX-37L200A12
Using the appropriate cable for the transmitter that came with the wireless headphones, connect one end of the cable to the AUDIO OUT jack on your TV set and the other end to the AUDIO IN jack of the transmitter. If your headphones came with rechargeable batteries, don't forget to charge them before using the headphones.
H
Can the LED lights burn out on dynex routers
Short answer - yes. Any lamp can burn out. It can also indicate a port that has gone bad, too. It there's no data getting in or out of port #2, connect the cable in #2 to a different port (1,3, etc.) if it works there - then port 2 is dead. Avoid using #2 port or replace the router.
Why when I hit shift and the number 2 it comes up as "
You haven't installed correctly your keyboard. You ahould know in what system is your keyboar, go to contro panel Internationa configuration - Language and make the correction. Shift " looks to mi as a Spanish keyboard configuration, among others.
I have an extrernal soundcard that only attachs
Who would prevent them from selling anything they like? Who would enforce that law?
PROBABLY, somewhere, whomever sold you that adaptor PROBABLY said something about its power requirements. It may not have been easy to understand, but it was probably there.
But... that doesn't get us any nearer a solution for your problem. For taht... there's WalMart, where you can buy a four-port POWERED USB hub (buy one that comes with its own "wall-wart" power supply).
Oh - you're in the UK. Do you have Wal-Mart there? If not, wherever you buy electronics stuff (including amazon.co.uk), they'll have a powered USB hub.
Not finding what you are looking for?