20 Most Recent
Labtec Rocketfish Webcam Questions & Answers
I have a rocketfish
Look here: http://www.rocketfishproducts.com/product-search.html?query=hd+webcam&mode=support&supportSearchButton=Search
2/27/2013 10:49:25 PM •
Labtec...
•
Answered
on Feb 27, 2013
How do I install rocketfish camera RF NBWEB
Windows drivers are at
http://www.rocketfishproducts.com/skins/skin_1/Topics/Drivers/RF-Webcam.zip
Mac drivers are at
http://www.rocketfishproducts.com/skins/skin_1/Topics/Drivers/RF-NBCAM-Mac.zip
Good luck!
2/3/2012 2:25:49 PM •
Labtec...
•
Answered
on Feb 03, 2012
M rocketfish cam will work just fine for a couple of minutes and then it zooms in on the corner and puts a bunch of lines through the picture. How do I stop this?
The driver for your camera is corrupt but windows still recognizes it as the best driver for your device so it will not replace it. You need to uninstall the camera driver manually. Depending on your version of windows: 1: Click on your start button- move the cursor above the "My Computer or Computer" link on the right side and RIGHT Click and choose "Show on Desktop" 2: Now- Go to the icon of My Computer on your desktop and right click and choose "Properties". 3: Go to the "HARDWARE" tab and click, then Choose "Device Manager" button and you should get the listed INSTALLED current drivers on your system. 4: If your camera is not showing immediately, go down the list until you find it under "Imaging Devices" or "USB Composite Devices". 5: Once you find it, click on it and choose "Uninstall" - Confirm the uninstallation and is asked, choose to have windows delete the driver files for this device. - NOW YOUR FREE TO REINSTALL THE NEW driver and it should work fine. Locate your driver and manual here:
http://www.rocketfishproducts.com/product-search.html?query=rf-hd Hope this helps... -Rob
2/3/2012 2:22:28 PM •
Labtec...
•
Answered
on Feb 03, 2012
My webcam was working properly,
Greetings,
Please, if you have the installation disc, go to
Control Panel> Programs and completely remove the Webcam software. Then, hold down the Windows key (between alt ad fn) and press R key. In the Run window which appears, type %temp% and hit enter. The Temp Files window will appear. Remove every file Windows will allow.
Reboot the computer
Reinstall your software and update it.
Regards,
Selk
5/20/2011 2:14:58 AM •
Labtec...
•
Answered
on May 20, 2011
RfLVCentral2.exe has encountrered a problem and
You need to provide some more info about the computer.
Which operating system are you using?
Is it a new camera?
Does this camera work with any other computer?
Have you tried downloading the drivers from the manufacturer website? If not then try that as well depending upon the operating system you have. If you want then we can take the remote access of your computer and try fixing the issue for you. Reach us at HNetworking.com and chat with us online over there.
2/13/2011 1:32:26 AM •
Labtec...
•
Answered
on Feb 13, 2011
Not finding what you are looking for?