20 Most Recent
Electrolux EIED55H Dryer - Page 4 Questions & Answers
It wont heat
Hi,
If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.
if you dryer is gas check out this gas no heat tip....
If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.
check out this electric no heat tip...
heatman101
//
Dryer was working fine, then it stopped its cycle
Hello & Welcome to FixYa
The hum sound that you hear is coming from the motor that has gone bad and needs replacement. When the dryer humms and will not work it is the motor that has gone bad, you can also check the wire connections from the control to the motor before replacing it. Please get back to me if you have any other questions.
Kevin
I am getting a Error
Check the tubing to the exhaust. It maybe full of lint causing this code to be shown
Dryer heating eliment not terning on
Hi,
If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.
if you dryer is gas check out this gas no heat tip....
If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.
check out this electric no heat tip...
heatman101
,./,.
The dryer is not heating up
Hi,
If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.
if you dryer is gas check out this gas no heat tip....
If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.
check out this electric no heat tip...
heatman101
//.,
Scaping sound. Drum is scraping on the outer side
Hi,
Here is a tip that I wrote about dryers and noises...
It will help you determine what is happening there...
Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise
heatman101
Asker's Testimonial "That answer was very informative - thank you fortaking the time to educate me. " - teresa241964
Im getting the E63 error
The error code E63 is a high temperature warning:
If you dryer is under warranty, take advantage of it. If not it may be a failing sensor or possibly a control board.
10/21/2010 11:09:58 PM •
Electrolux...
•
Answered
on Oct 21, 2010
I was drying and the
Hi
Error code E64 means Heater Open Circuit. This error appears when the Heating element or wiring to the heating element is defective. To clear the error code (s): Press and hold the far left key under the display and “cancel” buttons simultaneously for 3 seconds. If the error appears again then you’ll need to check heater coils and connections for open circuits. Use a multimeter to check the heater element, use Rx100 setting on the multimeter. It should display 30-33 K ohms as the resistance. If it is less than this or exceeds this limit then the element has gone bad and you would need to replace the element. Hope this helps...
Daniel
Error message e64
Hi
Error code E64 means Heater Open Circuit. This error appears when the Heating element or wiring to the heating element is defective. To clear the error code (s): Press and hold the far left key under the display and
When start is pushed, dryer hums then immed.
Normal
0
MicrosoftInternetExplorer4
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";}
Hi,
The motor is going bad...
There can be many reasons why your dryer will not start or turn...
The most common causes are the belt breaking or jumping off, or the motor going
bad...
Here are a couple of tips that I wrote will help you to figure out why your
dryer will not run...
Dryer Repair - The Dryer is not Turning
Dryer Repair - The dryer will not start
heatman101
New electrolux EWGD65HTS dryer posts fault code
if this unit is new do not try and fix yourself. if your break anything it will void your warrenty. call electrolux they have great service companys and if they can trouble shot it with you they will overnight the parts to your house and set up service for you. electrolux is a great company and will help you get your dryer fixxed as fast as they can
I need to check that
The blower is located in the front section of this dryer. To access it you have to go thru the front. You have to remove the top 1st and then start disconnecting and taking screws out of the front to remove the whole front panel. Remove the bottom panel also and should be easier. Hope this helps.
Not finding what you are looking for?