20 Most Recent
Lexmark E260dn Laser Printer - Page 9 Questions & Answers
I have a large list of envelopes that I have to
If your printer is the Lexmark E260dn, the tray doesn't support envelopes. The tray is for letter /legal /A4 or A5 paper sizes. For smaller type of media, it has to be fed through the manual feeder. I'm really sorry but I hope I can assist you more on this.
Prints one or to pages then stops. Have to reset
Try to run a test for continuous print test page in diagnostics mode. To enter the Diagnostics mode:
1. Turn off the printer.
2. Open the front access door.
3. Turn on the printer while pressing and holding Cancel .
4. Close the front access door once the Error light displays. Print the menu page by pressing and holding Continue until all of the lights flash. Follow the instructions on
the menu page to access the menu items.
Continuously print pages containing cross lines, printer information, and margin settings. Press and hold until the Continue button lights flash to begin. Press Cancel to stop.
Make sure he selects the "Cont Prt Simplex Tray 1" option
If problem persists, contact Lexmark at 1-800-LEXMARK()1-800-539-6275.
Setting Margins
There's no option to change the margin settings on the printer itself. But, you should be able to adjust it in the settings in the application that you are using.
My lexmark e260dn ps3 will not print envelopes correctly
THIS PRINTER CANNOT PRINT ENVLOPES, CHECKS, MONEY-ORDERS OR OTHER CUSTOM SIZES.
I have tried the various drivers, and it just won't print custom size documents, like envelopes, or checks. The From address, typed in the top left corner falls on the top right, the to address typed in the center falls off the page, and so it does not even show up. I just see the word to in the right margin, but the addressee's name and address are missing. I have spent days with tech support and online,without a solution. This printer is a lemon.
Memory expansion
The Lexmark E260dn has 32MB of memory pre-installed and you can add a maximum of 128MB to this. The type of memory is 128MB DDR1-DRAM. The part number is 1022298.
Prints garbage
You have a software problem there. You can try and clear the print job in the computer but more than likely its already in the printer memory and is going to print until its finished. I think you're going to have to let it run until its finished then go back and make sure your computer malfunction is fixed before you try it again. I know its frustrating...but it will eventually stop. You might want to re feed the used paper unitl it does. I'd say turn it off and on...but I don't think that will clear the print job..and you've probably already tried that anyway.
Why does the data light blink then paper jam light goes on even with no paper in it
Most likely when you removed the paper jam a small piece of paper got jammed under one of the sensors. This is a very common problem. It is also possible depending on the model that you have dislodged one of the flags that activates sensors for paper travel. Check the back of the printer in the fuser area as these are the most commonly damaged sensors.
Not finding what you are looking for?