20 Most Recent Dell Latitude E6400 Notebook - Page 8 Questions & Answers

Plug a monitor into the video connector. Right click on your desktop, select Screen Resolution, and then using the setup panel, identify your external monitor and finish the setup.

Hi Anonymous, You may want to try performing a factory reset using the below link which might help: http://dell.to/1B8to5P Note: Please backup data before attempting this. Thanks and Regards. Kiran Kumar. #iworkfordell.

Gerard D Gilles, You will need to contact Dell Support and have them reset the system bios password if you have forgotten it. They will verify ownership of the system and then provide you with reset information. Thank You, Dell-Jesse L Dell Social Media and Communities

Hi Collyod, BIOS is a type of firmware which used during the boot process on Dell computers. BIOS can be accessed by tapping the F2 key at the startup. Also let me know if there are any issues with the computer. Thanks and Regards. Kiran Kumar. #iworkfordell.

There usual jumper to clear the bios How to Clear the CMOS Reset the BIOS Why

From your programs list chose Dell Recovery Center. Launch Dell System Recovery and follow the instructions. You can also tap F11 as you start the PC. Online Virus Removal 39 99 Online Virus Removal and Online PC Help

Assuming a couple of things: 1. Your OS is Windows XP 2. This is the error message you are getting - "Windows NT could not start because the following file is missing or corrupt: Winnt_root\System32\Ntoskrnl.exe Please re-install a copy of the above file." To reinstall notskrnl.exe, do this:

Start the computer by using your Windows XP CD-ROM. Press any key to boot from the CD.

After the setup files are finished loading press R to repair using Recovery Console.

When you are in the recovery console, select the installation to log on to (usually number 1), and then press ENTER.

Login to the Administrator account by typing the password for this account, and then press ENTER.

At the recovery console command prompt, type the following command, and then press ENTER: For Uni-Processor systems: expand <cd-drive>:\i386\ntoskrnl.ex_ <hd-drive>:\Windows\system32\ntoskrnl.exe For Multi-Processor systems:expand <cd-drive>:\i386\ntkrnlmp.ex_ <hd-drive>:\Windows\system32\ntoskrnl.exe Note In these two commands, the <cd-drive> placeholder represents the drive letter of your CD drive, and the <hd-drive> placeholder represents the drive letter of the hard disk on which windows is installed.

If you receive a prompt to overwrite the file, press Y.

Type exit, and press ENTER at the command prompt.

You should now be able to boot up properly.

Usually its hard drive backup your data you can diagnose it by pressin F12 at boot and choose diagnostics.

Hi Robert Middlemiss, Dell Latitude systems usually have a WIFI button so even if you remove the Wi-Fi toggle the computer needs to connect to Internet without any issues. However, please explain more about the same so that I can help you more. Thanks and Regards. Kiran Kumar. #iworkfordell.

Hello, You may turn ON the wireless capability by following the instructions mentioned below: a)Connect a USB keyboard to the computer and restart the computer. b)Press the F2 key at the Dell logo to "Enter Setup". c)Select F9 to load defaults. d)Select F10 to Save settings and Exit. WLAN will connect automatically after windows starts up. Note: If you Wifi driver is not installed, you may download the required driver from the below link: http://downloads.dell.com/FOLDER01146814M/1/ST_Network_Driver_TKWFP_WN_3.1.2.87-7.4.0_A07.EXE Hope this helps.

Go to this page - http://pcsupport.about.com/od/toolsofthetrade/tp/passrecovery.htm and read about FREE password removal/recovery software. Go to spotmau.com for COMMERCIAL password programs

ACS is an Atheros company hardware error. This could be a wireless card in your computer that has failed. It might also be a driver that is missing or corrupt.

Go to the dell site and put in the service tag number . That is more specific to the hardware that is on that machine.

Hi Anonymous, Please email me the system service tag along with the current operating system installed to [email protected] can then check and provide the right driver. Thanks and Regards. Kiran Kumar. #iworkfordell.

Ako ne mozes pokrenuti kameru u programima kao sto je skype treba da instaliras driver od kamere ili da provjeris podesavanja. Ako zelis koristiti kameru u druge namjene moras imati odredjeni program za tu namjenu.

A 141 code means something is wrong with your hard drive. The most easy way to obtain help is go to Dell support webpage. Go to product support and select auto detect product.Dell server will detect your computer and will perform a diagnostic teat.

BIOS Master Password Generator for Laptops Try entering the service tag # from under the laptop.

1 First locate your wireless switch to see if your wireless is turned on It is labeled #13 ftp://ftp.dell.com/Manuals/all-products/esuprt_laptop/esuprt_latitude_laptop/latitude-e6410_setup%20guide_en-us.pdf

Hi Eric Garcia, I will be glad to help you. Please email me the system service tag along with customer name, place of purchase, address, email address and phone number to [email protected] . Also send me a picture of the password prompt screen and then I can check and see what can be done. Thanks and Regards. Kiran Kumar. #iworkfordell.

Hi Kevin Teague, There is possibility that the battery may have failed. Try following the below steps and let me know the results:

(1)Run an online diagnostics using the below link: http://dell.to/189uUNy Click battery life and run diagnostics Make a note of the error codes that appear (if any) (2)Try using a known good battery and check if that makes any changes. Thanks and Regards. Kiran Kumar. #iworkfordell.