20 Most Recent Panasonic KX-T7633 Corded Phone - Page 9 Questions & Answers

You will have to call your phone company and get them to roll your land line over to your cell phone (there is a charge for this) Note, anytime you do not answer your office line your cell will ring.

Panasonic... | Answered on May 04, 2011


Welcome to Fixya. To do a conference call please follow the procedure below.

- While speaking to one person, press the Conf button
- Dial the other number
- Talk to the new person
- Press Conf button again to talk to everyone

If you have questions please let me know. Thanks for using Fixya.

Panasonic... | Answered on Apr 25, 2011

Start by identifying what system you have. There are at least 6 manuals; the Features Manual, Operating Manual, PC Programming Manual, Proprietary Telephone Programming Manual, and Installation Manual at a minimum.

I'd start with the OM and FM.


Panasonic... | Answered on Apr 22, 2011

Does your system use the FWD/DND option or is it the programming. I also need to know what kida system this is.

If it is for the TDA then you can (if you have access too)
Prog soft key below LCD ->
the press FWD/DND button ->
Down on the silver button about 3 times. Should see 53:FWD N/A Time then enter
Should see timer (sec) :xxx with your current time.
Press new time example 015 for 15 sec then press enter.

If that doesnt work let me know and I get you the other way.

Panasonic... | Answered on Apr 20, 2011

This is a program, you can do this from extension 101

1. go to extension 101
2.lacate program code 604

this is the program number for the extension name

any doubt please contact again

Hope this helpful

Panasonic... | Answered on Apr 20, 2011

Press MESSAGE and look at the display. Three are messages, just not from the voice mail system. The 3rd soft key will let you ERASE the message.


Panasonic... | Answered on Apr 19, 2011

The "code" that blocks it would be the password to mailbox 998 which is the voice mail message manager. This is assuming a TVA or TVx external box and not the internal sytem. That's controlled by 39x numbers and passwords.

In addition, you have to know how the TVx voice mail system was programmed. Your installer should have given or be able to give you layout instructions and tell you how to re-record the greetings.


Panasonic... | Answered on Apr 12, 2011

Pick a set of buttons that you want to program, then press PROGRAM the button and dial 1+ the ext and STORE

The preceeding "1" tells the system that the next digits are extensions.


Panasonic... | Answered on Apr 01, 2011

The extensions need to be added to the ICD group and given either an Immediate or some ring delay. It's fairly easy to tell because if they're not in the group the line is red and doesn't blink on incoming calls. By default ICD group 1 is access code 600 or 601(try dialing it on the intercom from any phone and see if your phones don't start ringing). Unfortunately, you need higher level access to modify ICD groups. It's either done from the programming tool, or a phone with a class of service allowed to make such changes.


Panasonic... | Answered on Mar 31, 2011

It takes so long to get an answer because you asked two different and complex questions. 1. Where do you want the call to go? It's related to question #2, but the forward either works or it doesn't...that's what the FWD/DND button is for. Your delay before it goes can ge adjusted. In our installations, we use CF-No Answer and set the ring count to 4. If you're on the phone and another call comes in, you can see it from the display and hear the soft ring. You can either answer it or ignore it and it will go to somewhere else (generally voice mail).

As far as your second question, if you have voice mail, an auto attendant can be part of the system. It's programmed at installaton to pick up incoming calls and follow a menu system called Custom service. It also functions as your voice mail system as mentioned in #1.


Panasonic... | Answered on Mar 30, 2011

If that (voicemailnumber) is 500, I'd be looking for the lights on the TVA voice mail system to see if they are solid green. You could have lost the synchronization.


Panasonic... | Answered on Mar 23, 2011

On the intercom dial *7511 *7510 turns it back off.


Panasonic... | Answered on Mar 22, 2011

as long as you have COS 'class of service' rights you can dial -
*7102 9 (phone number) #
this will forward all your calls

to cancel - dial *7100

Panasonic... | Answered on Mar 15, 2011

I don't know about a handset, since mine doesn't have a dial, but the phone underneath the handset has to have a button programmed with the lines you use in order to work. By default, the system has some number of Single CO buttons assigned in numerical order from the bottom to the top and left to right. You can test that by pressing PROGRAM, press the line buttons in sequence, and reading the display. They will say CO 001, 002, 003 etc. If they don't, you can always dial 0 001 store, 0 002 store etc and get the line appearance back.

This solution works in a small system and is very basic. It doesn't take a T1/E1/PRI or group CO buttons. into consideration. Such a solution is beyond the scope of a free forum.


Panasonic... | Answered on Mar 13, 2011

I don't know about a "user guide" but the Operating Manual would work wonders. http://www.public.carl.airpost.net/Pana/TDA/200_TDA_OM_06-121.pdf

The FWD/DND button has 3 steps of keypress, Off, FWD, DND. The idea is you press it until it stops flashing or being lit and you have nothing set. If that doesn't work, try Call FWD/DND cancel, *7100 on the intercom.


Panasonic... | Answered on Mar 11, 2011

For a KX-T7633 press the up arrow to increase the ringer volume (up or down arrow adjusts the volume). Some phones (KX-T7625) also have a ringer ON/OFF switch on the back of the unit.

Panasonic... | Answered on Mar 01, 2011

Sort of. The problem is once you record one, you have to delete and reinstall the mailbox to make it work and the canned message is horrible because it has no options. It's also long-winded with options that nobody would ever use.

Please, just record a short greeting and let it play.

If you want to delete it, the mailbox is deleted from the System owner's mailbox (999). It's part of mailbox administration and one option will be to delete the mailbox.


Panasonic... | Answered on Feb 17, 2011

All passwords can be reset from the system owner's mailbox (999). There will be an option to manage the mailboxes and reset the password is one of the commands.


Panasonic... | Answered on Feb 03, 2011

Not finding what you are looking for?
Panasonic KX-T7633 Corded Phone Logo

674 questions posted

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers


Level 3 Expert

13434 Answers

martin hogg

Level 2 Expert

157 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Panasonic Lands Phones

  • Panasonic Lands Phones

Most Popular Question

changing extansion names kx t7633 kx

  • Lands Phones