20 Most Recent RC ARF Long EZ .46 Pusher Nitro Gas Radio Remote Control Plane Questions & Answers

You might try contacting these guys. https://www.skytechhelicopter.com/parts-for-turbofrog-rc-helicopter The TF-1 model is similar and you might inquire about a guide for that if your primary inquiry doesn't yield a result.

is motor engaging the prop --plastic gears damaged /worn---weak batteries--freq--problem

https://www.youtube.com/watch?v=GZQMX1NkDlc This involves repair of an RC toy car. .https://www.rcscrapyard.net/maisto-rock-crawler.htm Go to Shapeways dot com and search for Maisto parts. Some 3D printed replacements. Below is an example of a warranty for a Cobra RC toy. You would have to try googling the maker of your RC toy and include the word warranty. https://www.cobratoys.com/Articles.asp?ID=265

Question edited for clarity. The manual is here Frank https://manualzz.com/doc/63028438/interactive-toy-concepts-qe8514xxtx27-boydcoddington-r-c-... https://www.google.com/search?q=boydster+ll+rc+car ..

You have mistakenly posted a question on FIXYA concerning a purchase you made. FIXYA does not sell merchandise. Consider asking a trusted relative or close friend to help you find out who to contact concerning your merchandise return issue.

I am not sure this is the switch you are looking for. You can search a website by going to Google, then in the searchbox, type site:www.thewebsiteaddress.com switch Of course, you use the actual website address. It will search the website for pages with the word "switch" on it. Here is the switch I found: http://www.rchelicopterpart.com/23-rc-car-parts?p=3 The following group might be of some help: https://www.helifreak.com/showthread.php?t=665738 It is possible that you might have to search for a used item to use for parts. For example at a site like: https://www.terapeak.com/worth/mix-lot-of-3-skyrover-exploiter-remote-control-helicopter-rc-for-parts-or-repair/222043300573/ https://jet.com/product/SkyRover-Phoenix-Outdoor-RC-HELICOPTER-4-Channel-Remote-Control-HELICOPTER/b72d14d82fe84b0caf3493b9ce8eea64 You might contact the business below and they may be able to help with that part: https://www.rc-helicopter-spare-parts-online.com/

The track worked great for the first month and my son loved it. Then one controller went bad and wouldn't supply any power to the track when the trick was pressed. Then other sections of the track started loosing power for some reason. This makes the entire track completely un-usable as the cars can get enough power to go around the loop.. All the railing constantly fall off and you have to re-attach it. This is very cheap quality and I am disappointed.

http://www.protocolny.com/instruction_manuals/rc/6182-2j-predator-sb-im.pdf

https://circuitdigest.com/article/servo-motor-basics

You can use any size Mah but the voltage must be the same.

try runryder

Contact a seller on Amazon and offer to purchase a copy of the instructions. https://www.amazon.com/NKOK-Banditz-Hyperspeed-Remote-Control/dp/B00EVAB0C2 https://www.amazon.com/NKOK-Banditz-Hyperspeed-Remote-Control/dp/B00EVAB0C2

check battery connections --and battery for wire connection damage

Other hydraulic functions work so it won't be a lack of pressure - likely to be a control issue though not necessarily a lack of supply through the valve. If the tilt ram is a single double-action type of ram one side must be exhausted in order to move when pressure is applied to the other end. If the oil can't be exhausted from the lazy end it won't matter how much pressure is applied to the other end.

Contact Us Above is a contact link. They do not have the staff to address emails.

Go to mfg for this.