20 Most Recent
Panasonic KX-T7636W Corded Phone - Page 4 Questions & Answers
My Panasonic base phone does not display anything
Hi,
Please leave a test message to your phone and check the display again. If still blank, please power cycle your phone and or headset before checking the screen again. Otherwise, I would re-read the steps for setting up voicemail on your phone and attempt them again.
Thank you.
How to check phone line on panasonic cordless phone
Unplug all the phones from the mains wall sockets, phone jacks, and remove all the batteries from the handsets.
If you have one, plug in an 'old style' corded phone into the main incoming line box. That is normally the one closest to the door.
If you don't have one, plug in the base unit into that master socket by the front door and the mains and put the battery in the handset. If it has a line, plug in the others, if it doesn't contact your telco.
Panasonic KX-TG1855AL envelope and speech bubble symbol
Hi, you probably won't get this anymore, but here is the fix (I had the same problem and couldn't get rid of it. Had no messages or calls that I hadn't viewed). You will laugh but press the Clear / Mute button for a few seconds. That is the bottom right button out of the four that are around the big round one. It has a C on it, a line under the C and the mute symbol underneath... Good Luck. Julia
My Panasonic home telephone keeps beeping?
usually this means the connection is not 100% or it can not charge or the battery is low ? How old is the unit ? and the regularity of the beeps and if they come from the base or the handset can give a clue try this method:
1. On the handset select Menu, Answer Phone is displayed, press Select
.
2. Press CALLS until Settings is displayed, press Select.
3. Press to highlight Ans. & record and press Select.
4. Press to display Message alert and then press
or to select On or Off and select Save.
Saved will be displayed and the annoying machine has now been de-beeped
If you have messages that you have not listened to this can cause beeping . You should try to give the model number and more details that way the answer will be more relevent .
I'm not using a land line with my Panasonic KX-TGD560 and only have my cell connected to it via Bluetooth. How do I clear the "Check Tel Line" message since I'm not using a "Tel Line"?
Check Tel Line means that the phone is not getting a dial tone. Unless you connect the KX-TGD560 base to a RJ-11 phone cord going to a RJ-11 jack with a working telephone service, this message will continue.
I've never used the cell phone link without having a land line connection. The Link-to-cell option for using the handset on Cell 1 (or Cell 2) may still work. You need to have a compatible cell phone close to the base. The phone needs to be positioned where it gets good signal strength. Test this yourself.
I hope this helps.
Cindy Wells
(Panasonic has the manuals and a trouble-shooting guide for the KX-TGD560 here: http://eng-ca.faq.panasonic.com/app/answers/detail/a_id/55826/~/product-guide---telephone---cordless---model-kx-tgd560%2C-kx-tgd562%2C-kx-tgd563%2C . )
Help, how to turn off voice mail on Panasonic KX-TGA470
The phone doesn't actually have a voice Mail service itself, it is just linked to your phone service provider. If you get a busy signal, it is because of them. contact them. Page 55 of the manual refers, you turn it off
Symbols don't copy and paste from the manual! This is the section.
Turning VM tone detection on/off The default setting is "On". 1 M MENU N# 3 3 2 2 Mb N: Select the desired setting. a M SAVE N a M OFF N
https://a.sellpoint.net/a/dGgnR6Yz.pdf
..
Not finding what you are looking for?