Panasonic KX-T7730 Corded Phone - Page 5 - Answered Questions & Fixed issues

First the button clear position
anfter press hold reset 20sec

it will reset
after turn off PABX
move the button to open position

and strat the PABX



Please let me know this is helpful

There is a switch on the back of older handsets on extension 21 or 201 Or press PROGRAM on this extension

Is your sp-phone working? if not, then you need to replacethe speaker unit. if it is working, then check if :1- ringer switch set to off.2-System programming is set to no ring for your extension.

you need to clear all data on your pbx.1-turn off pbx2-set the internal switch to clear3-turn on4-count to 3 and press the set button once5-count to 10 and return the switch to normal

if your pbx has a built in disa feature, then you need to programthe DIL (sys. pgm. # 418) to DISA-OGM 1. Then you need to record an OGM (program 9,1,1) to tell you customers that they can dial the ext.# directly.

The handset has been programmed to auto answer all or some calls. You will need to change it to normal answer mode via EXTN 20/21 whichever is your programming extension. To tell which one is your default extension it is usually the extension that will still work as a normal telephone in the event of a mains power failure.

The 7730 is a smartphone (PT) that connects to a Panasonic Hybrid exchange such as the KTES824 as an EXTENSION not a CO. When you say greeting do you mean a recorded greeting when calling the extension? In the 824 switch you will need to activate the Automatic Attendant (AA) that is built-in

You need to enter the programming mode from the default EXTN usually 20 or 21 and change the timings of the ring counts, normally shown in seconds, adjust to 30 secs which should give you the amount of rings you need if not just go back and adjust the ringing counter seconds up until you find the length of time that suits your needs.

What has happened is that the CO1 CO2 etc buttons have not been programmed to dial the access code for an outside line. You can do this manually by dialling 9 then the number you wish to call. You need to enter the programing mode from the default extension usually EXTN 20 or 21. You need to go into the options and assign the digit 9 and a pause (P). The system will allow you to set different options such as if someone is on CO1 and another user dials 9 from another extension, the system will then assign the next free exchange line, again this must be programmed via the default extension. Let me know if you need further help.

You need to set the date and time from the default extension "the programming extension" normally extension 20 or 21. You need to enter system programming mode - refer to user manual, then once set, all handsets should display the correct date and time.

To dial an outside (exchange) line you can either dial 9 followed by the number you want to reach or press a pre-programmed key on your handset that saves you from adding the digit 9. The access is normally assigned when your system is installed. Programming of the system can only be done from the first main extension on the system it is normally extension 20 or 21 (the extension that will work if there is a mains power failure), called the default extension. Some systems use different digits either 8 or 7 but the normal is 9. The digit 8 is normally used to pick up a ringing call from another extension. Should you need more help let me know :-) And of course I'd be grateful if you mark my advice accordingly if you have found it useful, thank you.

Press Program Press the button to store Press 2 then your outside line access code (usually 9) Then dial in the number to dial Press Store

To listen in on someone's call you enable monitor in COS and dial a busy phone and press 5 to listen in

need more details on problem. do you have access to programming the pbx?do you mean that others using the pbx cannot call?are they allowed to access a dial tone, but cannot dial out?

This manual may help you.

Check this site to download the user manual to this phone. It has all details. https://www.google.co.in/search?q=Panasonic+KX-T7730&ie=utf-8&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&channel=rcs&gws_rd=cr&ei=czI4UvGcH8iLrQf8hIGoDA

Basically, there are 2 ways of programming the date
and time - the short way and the long way.
If you are using the KX-T7730 phone on a Panasonic
KX-Txx 308/824 system:

SHORT WAY:
From the Switcboard / Main telephone
( ext 101, 10 or 9 ) with the handset on the
cradle/hook:
1. Press PROGRAM 0
2. Enter Date and Time
( The format is: yymmdd,
1 to 7 1=Monday 2=Tuesday etc, hh:mm,
0 or 1 0=AM 1=PM ) see example
3. Press AUTO DIAL / STORE to save your changes
4. Press PROGRAM to exit program mode

EXAMPLE:
If the date and time is 3 February 2010 Tuesday 2:15 pm you will enter as follows:
100203 2 02:15 1

LONG WAY:
From the Switcboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle/hook:
1. Press PROGRAM * # followed by the system
password ( default is 1234).
2. Now press 000 and then SP-PHONE.
Enter the year.
3. Scroll to the month with the right scroll key
(located at the right bottom corner of the phone).
To change the month use the AUTO ANS / MUTE
button.
4. Now scroll right again and change the date and
day.
To change the day, again use AUTO ANS / MUTE
5. Scroll right again and the time will appear.
Set the time.
To change am/pm scroll to it, and again,
use the AUTO ANS / MUTE button.
6. Press PROGRAM to exit program mode and you
are done.

Need help with programming a name change on existing extension~~

Programming is done on 7310, 7324 and 7316 type sets.Enter programming by pressing the feature key followed by **266344 (with the handset in its cradle).When prompted to enter the password enter 266344. The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming. At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number.Enter extension number you want to change the name on. (i.e 202)Then press the show key (top right arrow) The display should say LINE ACCESSPress the next key (bottom right arrow) . The display should say CAPABILITIES.Press the next key (bottom right arrow) .The display say Name(Traci).press the Chng soft key.use the dial pad to enter the name. advance using the arrow soft key to go to the next letter ex. Winston = 9 -> 4,4,4 -> 6,6 -> 7,7,7,7-> 8-> 6,6,6-> 6,6Press the next key (bottom right arrow) to enter the name. Press the release key when finished