Nerf Nite Finder - Answered Questions & Fixed issues


Here's one--

Although I am not completely familiar with the internals of the NERF NIGHTFINDER I have a good idea what is wrong.

Sometimes factories screw up, etc...

Lemme get to the point.

The circuit operating your light (if you don't know what that is look it up and find out) is probably not connected. Open up the laser and look online at what the internals look like. Make sure that the circuit is complete.

That's all, email me at [email protected] for more info on modding and nerf guns.

Nerf Nite Finder | Answered on Jul 07, 2020 | 445 views


That sounds like an internal mechanism issue, parts of the plastic on the inside could have worn down, causing the spring to slip and fire the bullet off.

Nerf Nite Finder | Answered on May 04, 2011 | 105 views


me too ?? where the answer? plas help me..

Nerf Nite Finder | Answered on Jan 30, 2011 | 110 views


to activate the light you need to insert two AA batteries into the handle at the bottom.When you have done that hold the trigger without loading any darts and it will light up.

Nerf Nite Finder | Answered on Oct 26, 2010 | 231 views


is It electric? if it is then you should look for some corrosion on the motherboard.

Nerf Toys | Answered on Jul 07, 2020 | 134 views


Because I'm unsure what version of the Rival Nemesis you have, I'd contact Hasbro directly and live chat or email their customer support team for troubleshooting advice. I've included the link.

Hope this helps!

Nerf Toys | Answered on Apr 19, 2020 | 142 views


Is there a Nerf round stuck in the mechanism

Nerf Toys | Answered on May 25, 2019 | 168 views


Did you verify that the Nerf could handle this type of power prior to using? Hopefully you didn’t fry anything.


If you’ve found this helpful, please click the green “helpful” icon. If you have 20 seconds please leave a few words as a review or recommendation! Also, follow me for more answers to everyday issues, I’m all for saving you money and making the most of your time! Thanks and have a great day!

Nerf Toys | Answered on Mar 15, 2019 | 134 views


http://www.fixya.com/support/t26809403-nerf_mega_mastodon_not_working_common

Nerf Toys | Answered on Jan 02, 2019 | 1,049 views


https://m.youtube.com/watch?v=spaayNFppaQ

Nerf Toys | Answered on Feb 14, 2016 | 85 views


1. Get a ruler
2. Push the ruler down the barrel so the end is near the bottom of the disc
3. Jiggle the ruler from left to right
4. Shoot the gun/Press the disc eject switch

Nerf Toys | Answered on Dec 21, 2013 | 745 views


unscrew the entier gun... all nerf guns are screwed together. you can practically cut the gun in half by unscrewing it. just make sure to put everything back how you found it. good luck to you.

Nerf Toys | Answered on Mar 29, 2011 | 467 views


I had the same problem with two guns out of the box. Turned out that the dividers in the battery tray kept the batteries from touching each other on some brands of batteries. Remove the dividers and should work. You can verify this by measuring the voltage on the two terminals of the battery pack.

Nerf Toys | Answered on Nov 08, 2013 | 2,719 views


You would probably have to send it back to China for repair. Or perhaps there is an electronics engineer who would look at it.

Have you tried removing the batteries overnight to reset all the circuitry?

https://www.google.com/search?q=Zillionz+ATM

..

Toys | Answered on Feb 26, 2021 | 15 views


If all else fails, ask them direct

Contact GoPed - GoPed.com

 goped.com > contact-us
Contact GoPed. Thank you for your interest in contacting Go-Ped®. We love to hear from ...

California Go-ped Spare Parts - Goped Scooter Tuning

 shop.goped-scooter-tuning.de > California-Go-peds-
California Go-ped Spare Parts. On this Side you find most videos about repair, tuning and tricks. Trail Ripper GTR40 / GTR46 / Interceptor · Super Go-ped Speed ...

California Go-ped ESR 750 with Li-lon Battery - Goped ...

 shop.goped-scooter-tuning.de > California-Go-ped-ESR...
California Go-ped ESR 750 with Li-lon Battery. (GopedESR: ESR750 Li-lon 16 in black) Product no.: 040110-1. California Go-ped ESR 750 with Li-lon Battery. €2,890.00 · ‎In stock

California Go-Ped Service manual

 manualzilla.com > Old > Automotive > Scooter
With the engine disengaged from the rear wheel, push the Go-Ped® around ... Figure 3 2-2 Service Manual Section 2 ESR750 & ESR750Ex Once the motor is ...

My 40mph commuter Goped build thread. - Endless Sphere

 endless-sphere.com > forums > viewtopic
Mar. 17, 2015 · 25 posts · ‎7 authors
I found out about a local service that took a gas powered GoPed to bars, ... I purchased a GoPed ESR750 off eBay. ... Warning:This post is being read via light, a substance known to the state of California to cause cancer. Top ...

About My Go-Ped® Model Serial # Dealer Service Center

 www.davesmotors.com > site > files > ESR_Manual_2008

PDF limited warranty and liability agreement, P.M.W. will repair or replace any part or component, other ... Attention: For more information on the California Go-Ped® Company and Go-Ped® brand prod- ... Your ESR750 is fitted with front disc brake.

Top 10 Best Goped in Los Angeles, CA - Last Updated ... - Yelp

www.yelp.com > search > find_desc=goped
The guy who repairs Gopeds name is Ryan was trying to buy my goped instead of repairing it. ... California Goped National Distribution Center. 26.7 mi.

Toys | Answered on Feb 25, 2021 | 12 views


Sometimes that happens because there is something stuck in the baby's mouth you can't see, best idea is to unclog it with the tutorial here: https://www.youtube.com/watch?v=0wlJQvFz8X4 or go to a doll repair shop.

Toys | Answered on Jan 26, 2021 | 17 views


Probably stolen property, the person you bought it from would know the password, ask them for it or return it to the shop you purchased it from for a full refund.

sale of goods act: item must be fit for use, no password is not fit for use!

Toys | Answered on Jan 02, 2021 | 20 views


The required, (but not included), 4 "C" size batteries fit inside the coal car. One "AA" size battery goes in the pump car, (which has a lantern light, besides the pumping soldier), and 3 "AA" size batteries are needed for the remote control. There are separate switches on the engine, the coal car and the pump car to activate all the features of the train. The directions are explained on the remote control devise.

Toys | Answered on Dec 30, 2020 | 23 views


They stop working because they are made in China for $5. They are not normally repairable apart from changing batteries. If you want to get inside, it will be through the base. Probably screws hidden under felt.

https://www.ebay.ca/b/Mr-Christmas-Carousel/908/bn_55191126

..

Toys | Answered on Jan 23, 2021 | 23 views


Make and model may help you get an answer.

Toys | Answered on Dec 21, 2020 | 14 views

Not finding what you are looking for?
Nerf Nite Finder Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Nerf N-Strike Longstrike CS-6
Nerf N-Strike Longstrike CS-6

2 Questions

Nerf N-Strike Spectre Rev-5 Dart Blaster
Nerf N-Strike Spectre Rev-5 Dart Blaster

1 Questions

Nerf Maverick Blaster
Nerf Maverick Blaster

5 Questions

Nerf Secret Strike As 1
Nerf Secret Strike As 1

11 Questions

Nerf N-Strike Longshot CS-6 Blaster
Nerf N-Strike Longshot CS-6 Blaster

4 Questions

Top Nerf Toys Experts

ADMIN Canada
ADMIN Canada

Level 3 Expert

36862 Answers

SPAMKILLER

Level 3 Expert

38021 Answers

Alyssa DeWolfe
Alyssa DeWolfe

Level 1 Expert

27 Answers

Are you a Nerf Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...