Nerf Maverick Blaster - Answered Questions & Fixed issues


I had the same problem too. Try opening it up and looking at some online pictures and compare them, if you still cant find the problem and you have the receipt, take the unit back where you got it from. Look at the springs really closely my maverick was broken due to a spring that slid out of its elevated piece of plastic. I fixed it lubricated some parts and put it back to together. It works great now. :)





10_16_2011_4_30_06_am.jpg

Nerf Maverick... | Answered on Oct 16, 2011 | 428 views


The same happened to me you have turn the turning part that holds the bullets right before the triger goes back all the way you have to turn the part with you fingers a little bit.

Nerf Maverick... | Answered on Mar 01, 2011 | 548 views


The factory must have left out a certain spring I could only explain to you if you've modded it.

Well, I'm going to explain anyway-

When you pull the trigger there is a mechanism is triggers that releases the plunger system, therefore compressing the air and firing the dart out of the turret. The factory (as I said before) left out the spring that makes the part move up or down as the trigger is operated, therefore making the gun malfunction.

My best suggestion- get a spring and add it in (if this is the case). Open up the shells/casing of the gun by unscrewing it apart and find the orange part next to the trigger.

Please email me at [email protected] a picture of the inside of your gun so I can analyze it.

If all else fails, take it back to the store.

Nerf Maverick... | Answered on Feb 27, 2011 | 398 views


There are multiple factors in which it will not fire/discharge-

For every problem I suggest you need to open up/unscrew the base plates.

1.) Sometimes nerf factories do not include necessary springs, which are needed to let the trigger lower an orange piece that discharges the plunger system. If not, get one from a nearby hardware store.

2.) Did you mod it? Some people take out the whole air resistors and don't realize that they have created HUGE openings for the air to flow out when pressurized against the bullet.

If you just unpacked it from a reliable source there is not much I can tell you besides the fact that the factoy screwed up and left some internal out.

Try to return it back where it came from and get another.

Factory mistakes like this are usually improbably, so you needn't worry about it when you get another one to replace this one.

Good luck!

Also- if you get a new one, email me at [email protected] for additional info on modding it. From silencing, air resistors, CO2, air pressure, spring rigging, the 'penny mod', and much much more!

Nerf Maverick... | Answered on Feb 27, 2011 | 358 views


is It electric? if it is then you should look for some corrosion on the motherboard.

Nerf Toys | Answered on Jul 07, 2020 | 134 views


Because I'm unsure what version of the Rival Nemesis you have, I'd contact Hasbro directly and live chat or email their customer support team for troubleshooting advice. I've included the link.

Hope this helps!

Nerf Toys | Answered on Apr 19, 2020 | 142 views


Is there a Nerf round stuck in the mechanism

Nerf Toys | Answered on May 25, 2019 | 168 views


Did you verify that the Nerf could handle this type of power prior to using? Hopefully you didn’t fry anything.


If you’ve found this helpful, please click the green “helpful” icon. If you have 20 seconds please leave a few words as a review or recommendation! Also, follow me for more answers to everyday issues, I’m all for saving you money and making the most of your time! Thanks and have a great day!

Nerf Toys | Answered on Mar 15, 2019 | 134 views


https://m.youtube.com/watch?v=spaayNFppaQ

Nerf Toys | Answered on Feb 14, 2016 | 85 views


1. Get a ruler
2. Push the ruler down the barrel so the end is near the bottom of the disc
3. Jiggle the ruler from left to right
4. Shoot the gun/Press the disc eject switch

Nerf Toys | Answered on Dec 21, 2013 | 745 views


unscrew the entier gun... all nerf guns are screwed together. you can practically cut the gun in half by unscrewing it. just make sure to put everything back how you found it. good luck to you.

Nerf Toys | Answered on Mar 29, 2011 | 467 views


I had the same problem with two guns out of the box. Turned out that the dividers in the battery tray kept the batteries from touching each other on some brands of batteries. Remove the dividers and should work. You can verify this by measuring the voltage on the two terminals of the battery pack.

Nerf Toys | Answered on Nov 08, 2013 | 2,719 views


You would probably have to send it back to China for repair. Or perhaps there is an electronics engineer who would look at it.

Have you tried removing the batteries overnight to reset all the circuitry?

https://www.google.com/search?q=Zillionz+ATM

..

Toys | Answered on Feb 26, 2021 | 15 views


If all else fails, ask them direct

Contact GoPed - GoPed.com

goped.com > contact-us
Contact GoPed. Thank you for your interest in contacting Go-Ped®. We love to hear from ...

California Go-ped Spare Parts - Goped Scooter Tuning

shop.goped-scooter-tuning.de > California-Go-peds-
California Go-ped Spare Parts. On this Side you find most videos about repair, tuning and tricks. Trail Ripper GTR40 / GTR46 / Interceptor · Super Go-ped Speed ...

California Go-ped ESR 750 with Li-lon Battery - Goped ...

shop.goped-scooter-tuning.de > California-Go-ped-ESR...
California Go-ped ESR 750 with Li-lon Battery. (GopedESR: ESR750 Li-lon 16 in black) Product no.: 040110-1. California Go-ped ESR 750 with Li-lon Battery. €2,890.00 · ‎In stock

California Go-Ped Service manual

manualzilla.com > Old > Automotive > Scooter
With the engine disengaged from the rear wheel, push the Go-Ped® around ... Figure 3 2-2 Service Manual Section 2 ESR750 & ESR750Ex Once the motor is ...

My 40mph commuter Goped build thread. - Endless Sphere

endless-sphere.com > forums > viewtopic
Mar. 17, 2015 · 25 posts · ‎7 authors
I found out about a local service that took a gas powered GoPed to bars, ... I purchased a GoPed ESR750 off eBay. ... Warning:This post is being read via light, a substance known to the state of California to cause cancer. Top ...

About My Go-Ped® Model Serial # Dealer Service Center

www.davesmotors.com > site > files > ESR_Manual_2008

PDF limited warranty and liability agreement, P.M.W. will repair or replace any part or component, other ... Attention: For more information on the California Go-Ped® Company and Go-Ped® brand prod- ... Your ESR750 is fitted with front disc brake.

Top 10 Best Goped in Los Angeles, CA - Last Updated ... - Yelp

www.yelp.com > search > find_desc=goped
The guy who repairs Gopeds name is Ryan was trying to buy my goped instead of repairing it. ... California Goped National Distribution Center. 26.7 mi.

Toys | Answered on Feb 25, 2021 | 12 views


Sometimes that happens because there is something stuck in the baby's mouth you can't see, best idea is to unclog it with the tutorial here: https://www.youtube.com/watch?v=0wlJQvFz8X4 or go to a doll repair shop.

Toys | Answered on Jan 26, 2021 | 17 views


Probably stolen property, the person you bought it from would know the password, ask them for it or return it to the shop you purchased it from for a full refund.

sale of goods act: item must be fit for use, no password is not fit for use!

Toys | Answered on Jan 02, 2021 | 20 views


The required, (but not included), 4 "C" size batteries fit inside the coal car. One "AA" size battery goes in the pump car, (which has a lantern light, besides the pumping soldier), and 3 "AA" size batteries are needed for the remote control. There are separate switches on the engine, the coal car and the pump car to activate all the features of the train. The directions are explained on the remote control devise.

Toys | Answered on Dec 30, 2020 | 23 views


They stop working because they are made in China for $5. They are not normally repairable apart from changing batteries. If you want to get inside, it will be through the base. Probably screws hidden under felt.

https://www.ebay.ca/b/Mr-Christmas-Carousel/908/bn_55191126

..

Toys | Answered on Jan 23, 2021 | 23 views

Not finding what you are looking for?
Nerf Maverick Blaster Logo

Popular Tags

12 questions posted

Ask a Question

Usually answered in minutes!

Top Nerf Toys Experts

ADMIN Canada
ADMIN Canada

Level 3 Expert

36841 Answers

SPAMKILLER

Level 3 Expert

38019 Answers

Alyssa DeWolfe
Alyssa DeWolfe

Level 1 Expert

27 Answers

Are you a Nerf Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...