20 Most Recent
BMW 02+ 3 5 X5 M3 Series Car Radio Wiring Harness Wire - Page 8 Questions & Answers
I have a 5 wire self lock function twist throttle. I need help connecting the wires to my controller
- Red wire (5V): Connect the red wire from the throttle to the 5V or +5V output on your controller. This wire provides the 5-volt power supply for the throttle.
- White wire (Output): Connect the white wire from the throttle to the throttle signal input on your controller. This wire carries the throttle position signal and communicates the speed or power level to the controller.
- Black wire (Negative): Connect the black wire from the throttle to the negative or ground terminal on your controller. This wire completes the circuit and provides the ground connection.
- Green wire (Battery positive): Connect the green wire from the throttle to the positive terminal of your battery. This wire provides the positive power supply for the throttle.
- Yellow wire (Switch): The yellow wire is typically used as a switch wire for the self-lock function. Depending on your specific controller and setup, you may need to connect this wire to the designated switch input or function on your controller. Consult the documentation or instructions provided with your controller for proper connection of the switch wire.
Dvd powered up then will not again
Yes, it is possible for off and on switches to go bad over time. This can apply to the power switch of the DVD player in your 2005 Ford Freestyle as well. Over time, the switch may become worn out, develop loose connections, or experience internal damage, which can result in a malfunctioning or non-responsive switch.
Carrozeria Avic-Hrz oo9G Japanese language. My LCD screen is broken. What is the English version , so I can replace?
The Carrozzeria AVIC-HRZ009G is a car navigation system specifically designed for the Japanese market. Unfortunately, there is no direct English version of this model available. Carrozzeria is a brand owned by Pioneer Corporation and primarily produces car audio and navigation systems for the Japanese market.
If the LCD screen of your Carrozzeria AVIC-HRZ009G is broken, it would be best to contact Pioneer customer support or an authorized Pioneer service center in your region. They may be able to assist you in finding a suitable replacement or provide repair services for your specific model.
I went to play a CD and it came up on the radio screen reset.I took the faceplate off and pushed the reset button but CD player would still not play,what should I do ?
If you have already tried resetting the Alpine INE-S920HD head unit by pressing the reset button and the CD player is still not functioning, here are a few additional steps you can take:
- Check the CD: Ensure that the CD you are trying to play is in good condition and free from scratches or damage. Try playing a different CD to see if the issue persists. If the problem occurs with multiple CDs, it indicates a potential issue with the CD player itself.
- Clean the CD player: Dust or dirt on the lens of the CD player can cause playback issues. Try using a CD lens cleaner to clean the lens of the CD player. Follow the instructions provided with the CD lens cleaner carefully.
- Verify the disc format: Make sure the CD you are trying to play is in a compatible format supported by the Alpine INE-S920HD head unit. Refer to the user manual for the supported disc formats.
- Update firmware: Check if there is a firmware update available for your Alpine head unit. Visit the Alpine website or contact their customer support for information on how to update the firmware. Updating the firmware may resolve any software-related issues that could be causing the CD player malfunction.
- Seek professional assistance: If the above steps do not resolve the issue, it's recommended to seek assistance from a professional car audio technician or contact Alpine customer support directly. They have the expertise to diagnose and resolve any complex issues with the CD player or head unit.
Remember to handle CDs with care, avoid using CDs with scratches or damage, and ensure the head unit is compatible with the disc format you are using.
Can i run my kicker1000.1zx to thisntx7912 sub
Yes, you can run a Kicker 1000.1ZX amplifier to power the NTX7912 subwoofer. The Kicker 1000.1ZX amplifier is a monoblock amplifier capable of delivering 1000 watts RMS power at a 2-ohm impedance. The NTX7912 subwoofer is a 12-inch subwoofer rated for handling up to 750 watts RMS power.
Since the Kicker amplifier can provide more power than the subwoofer's RMS rating, you will have sufficient power to drive the subwoofer. However, it's essential to set the gain properly on the amplifier to prevent overpowering and potentially damaging the subwoofer.
6 DISC CD Changer in trunk worked yesterday on 2002 mercedes clk430...says no cd changer
If your 6-disc CD changer in the trunk of your 2002 Mercedes CLK430 was working fine yesterday, but is now displaying a "No CD Changer" message, there may be a few things you can try to troubleshoot the issue:
1. Check the connections: Make sure the CD changer is properly connected to the car's audio system. Check the connections for any loose or disconnected cables. Also, check the fuse for the CD changer in the car's fuse box.
2. Check for jammed CDs: It is possible that one of the CDs in the changer is jammed, which can cause the error message to appear. Try pressing the eject button to see if any CDs are stuck in the changer. If so, try gently removing them.
3. Check the CD format: Make sure the CDs you are trying to play are in a format that is compatible with the CD changer. The CD changer may not be able to play CDs that are scratched or in a non-standard format.
4. Try resetting the audio system: Try resetting the audio system by disconnecting the car battery for a few minutes. This may reset the CD changer and fix any software issues.
If none of these solutions work, there may be a hardware issue with the CD changer. It may need to be repaired or replaced. You can consult a mechanic or audio specialist for further assistance.
Panasonic cn-mw250d software
I have just purchased a Toyota Vitz Car imported from Japna into Sri Lanka. It has a panasonic cn-mw 250d radio/CD type system in it but due to missing sd card with appropriate software I am not able to use it. can you please help. My Email
[email protected]
Not finding what you are looking for?