20 Most Recent Metra 95 96 Chevy Truck - Page 8 Questions & Answers

1. Access the Settings Menu: Depending on your band, press the dedicated settings button, swipe left or right on the touch screen, or use the corresponding app on your smartphone to access the settings menu.
2. Find the Time Settings: Look for an option related to time settings, which may be labeled as "Time," "Clock," or "Settings."
3. Set the Time Format: Choose the desired time format, such as 12-hour or 24-hour format.
4. Set the Hour: Use the navigation buttons or touch screen to adjust the hour. Some bands may allow you to tap on the hour to cycle through the available options.
5. Set the Minutes: Similarly, use the navigation buttons or touch screen to adjust the minutes.
6. Set the Seconds (optional): If your band allows, you can also set the seconds by following similar steps as above.
7. Save or Confirm: Once you have set the desired time, save or confirm the changes by pressing a dedicated button, tapping on a checkmark or confirmation icon, or following the on-screen instructions.
8. Sync with Smartphone (if applicable): If your band syncs with a smartphone app, make sure the time on your smartphone is accurate, and sync the band with the app to ensure the time is updated.

1. Turn on your LG 65UK7500 TV and ensure it is connected to a video source.
2. Press the "Settings" button on your TV remote. It is usually represented by a gear or cog icon.
3. Use the arrow buttons on the remote to navigate to the "Sound" or "Audio" settings. Press the "OK" or "Enter" button to access the sound settings.
4. In the sound settings menu, you should find options for adjusting various sound parameters, including bass and treble. Look for options like "Equalizer," "Audio Settings," or "Sound Mode."
5. Select the option that allows you to adjust the bass and treble settings. It may be labeled as "Bass" or "Treble."
6. Use the arrow buttons on the remote to increase or decrease the levels of bass and treble according to your preference. Some TVs may use numerical values, while others use a graphical representation.
7. Once you have adjusted the bass and treble settings to your liking, press the "OK" or "Enter" button to save the changes.

1. Red wire (5V): Connect the red wire from the throttle to the 5V or +5V output on your controller. This wire provides the 5-volt power supply for the throttle.
2. White wire (Output): Connect the white wire from the throttle to the throttle signal input on your controller. This wire carries the throttle position signal and communicates the speed or power level to the controller.
3. Black wire (Negative): Connect the black wire from the throttle to the negative or ground terminal on your controller. This wire completes the circuit and provides the ground connection.
4. Green wire (Battery positive): Connect the green wire from the throttle to the positive terminal of your battery. This wire provides the positive power supply for the throttle.
5. Yellow wire (Switch): The yellow wire is typically used as a switch wire for the self-lock function. Depending on your specific controller and setup, you may need to connect this wire to the designated switch input or function on your controller. Consult the documentation or instructions provided with your controller for proper connection of the switch wire.

Yes, it is possible for off and on switches to go bad over time. This can apply to the power switch of the DVD player in your 2005 Ford Freestyle as well. Over time, the switch may become worn out, develop loose connections, or experience internal damage, which can result in a malfunctioning or non-responsive switch.

The Carrozzeria AVIC-HRZ009G is a car navigation system specifically designed for the Japanese market. Unfortunately, there is no direct English version of this model available. Carrozzeria is a brand owned by Pioneer Corporation and primarily produces car audio and navigation systems for the Japanese market. If the LCD screen of your Carrozzeria AVIC-HRZ009G is broken, it would be best to contact Pioneer customer support or an authorized Pioneer service center in your region. They may be able to assist you in finding a suitable replacement or provide repair services for your specific model.

If you have already tried resetting the Alpine INE-S920HD head unit by pressing the reset button and the CD player is still not functioning, here are a few additional steps you can take:

1. Check the CD: Ensure that the CD you are trying to play is in good condition and free from scratches or damage. Try playing a different CD to see if the issue persists. If the problem occurs with multiple CDs, it indicates a potential issue with the CD player itself.
2. Clean the CD player: Dust or dirt on the lens of the CD player can cause playback issues. Try using a CD lens cleaner to clean the lens of the CD player. Follow the instructions provided with the CD lens cleaner carefully.
3. Verify the disc format: Make sure the CD you are trying to play is in a compatible format supported by the Alpine INE-S920HD head unit. Refer to the user manual for the supported disc formats.
4. Update firmware: Check if there is a firmware update available for your Alpine head unit. Visit the Alpine website or contact their customer support for information on how to update the firmware. Updating the firmware may resolve any software-related issues that could be causing the CD player malfunction.
5. Seek professional assistance: If the above steps do not resolve the issue, it's recommended to seek assistance from a professional car audio technician or contact Alpine customer support directly. They have the expertise to diagnose and resolve any complex issues with the CD player or head unit.

Remember to handle CDs with care, avoid using CDs with scratches or damage, and ensure the head unit is compatible with the disc format you are using.

Yes, you can run a Kicker 1000.1ZX amplifier to power the NTX7912 subwoofer. The Kicker 1000.1ZX amplifier is a monoblock amplifier capable of delivering 1000 watts RMS power at a 2-ohm impedance. The NTX7912 subwoofer is a 12-inch subwoofer rated for handling up to 750 watts RMS power. Since the Kicker amplifier can provide more power than the subwoofer's RMS rating, you will have sufficient power to drive the subwoofer. However, it's essential to set the gain properly on the amplifier to prevent overpowering and potentially damaging the subwoofer.

plug what in< NOT TOLD. at all. the number one cause of most toys like this is;: bad battery in the unit. replace it. jack 4 , 9vdc is the only charging port. per the users guide lost the users guide did you> the lost manual is here, lucky you https://usermanual.wiki/m/c7c6f7ccc98e6d2297a3207f930af91d083af502a6c06967128198a76b277cdb.pdf

check out these sites https://duckduckgo.com/?t=ffab&q=pedusa+pe+771+user+manual&atb=v159-1&ia=web best to you

In modern cars, the Body Control Module (BCM) runs the radio and communicates on the computer bus network. It gets confused when you put another radio in it. You are not alone! https://www.google.com/search?q=2008+Audi+A3.+I+have+installed+an+aftermarket+radio+but+the+rear+speakers+and+built+subwoofer+won%27t+come+on ..

There are three ways to get the code. Your way is Option 3. https://www.fixya.com/support/r29874205-need_vehicle_radio_code

Question edited for clarity, wrong type of 'to', 'two', 'too'. Question moved to Car Amps category. It sounds like is has failed electronically Swap the amps over physically. Take the one for the subs and put it on the other speakers and and put the working amp on the subs. If that makes the subs work, you take the failed amp for repair of buy a new one that will damage your hearing by the time you are 35. I am 70 and have tinnitus from listening to loud music in my 20s!

Here's the manual user for it: Kenwood KDC-128CR, KDC-1028, KDC 128 User Manual (manualmachine.com)

Look at the wire and look at the contacts where the wires got torn away. Normally there is some type of clue to where they came from. In general terms red or brown is live and black or blue is negative, green is ground. The seller gives Lifetime Tech Support. They can check for you. https://www.onlinecarstereo.com/CarAudio/p_44441_Performance_Teknique_ICBM-BT110X.aspx https://www.google.com/search?q=performance+teknique+icbm+bt110x+wiring+diagram ..

If your 6-disc CD changer in the trunk of your 2002 Mercedes CLK430 was working fine yesterday, but is now displaying a "No CD Changer" message, there may be a few things you can try to troubleshoot the issue: 1. Check the connections: Make sure the CD changer is properly connected to the car's audio system. Check the connections for any loose or disconnected cables. Also, check the fuse for the CD changer in the car's fuse box. 2. Check for jammed CDs: It is possible that one of the CDs in the changer is jammed, which can cause the error message to appear. Try pressing the eject button to see if any CDs are stuck in the changer. If so, try gently removing them. 3. Check the CD format: Make sure the CDs you are trying to play are in a format that is compatible with the CD changer. The CD changer may not be able to play CDs that are scratched or in a non-standard format. 4. Try resetting the audio system: Try resetting the audio system by disconnecting the car battery for a few minutes. This may reset the CD changer and fix any software issues. If none of these solutions work, there may be a hardware issue with the CD changer. It may need to be repaired or replaced. You can consult a mechanic or audio specialist for further assistance.

I have just purchased a Toyota Vitz Car imported from Japna into Sri Lanka. It has a panasonic cn-mw 250d radio/CD type system in it but due to missing sd card with appropriate software I am not able to use it. can you please help. My Email [email protected]