Top 20 Metra 86 9001 Vw/Audi/Mercedes Radio Removal Tool - Page 6 Questions & Answers

K74? UK plate? We need 'year FULL maker and model'. We are in North America and don't do 'K74' :>DLooks like a Mitsubishi L200?Here is your wiring, looks like Yellow is battery constant.https://www.google.com/search?q=mitsubishi+l200+radio+wiring+diagram..

dealer with vin and proof of ownership

Try cleaning the contacts with a q tip and rubbing alcohol and see if that helps.

It sounds like you are having trouble with the radio and DAB reception when the head unit is in the cage/holder. This could be caused by either a faulty antenna connection or a faulty ground connection. To troubleshoot, first check the antenna connection to make sure it is securely connected. If the connection is secure, then check the ground connection to make sure it is properly connected to the chassis of your vehicle. If the ground is not connected properly, it can cause signal interference and reception issues. If these steps do not resolve the issue, then you may need to contact a professional for futher help.

If your Pure CD player keeps changing source to AUX, it may be due to a few different reasons. Here are some troubleshooting steps you can try:

1. Check the connections: Make sure that the cables connecting your CD player to your speakers or amplifier are securely plugged in. Loose or faulty connections can cause interruptions in the signal and trigger the player to switch to AUX mode.
2. Clean the input selector switch: If your CD player has an input selector switch, dust and debris may accumulate over time and cause the switch to malfunction. Clean the switch using a can of compressed air or a soft-bristled brush.
3. Check the settings: Some CD players may have settings that automatically switch to AUX mode when no signal is detected from the CD player. Check your user manual to see if your CD player has this feature and how to turn it off.
4. Reset the CD player: Turn off your CD player and unplug it from the power source for a few minutes. Then, plug it back in and turn it on to see if the issue is resolved.
5. Contact the manufacturer: If none of the above solutions work, it may be necessary to contact the manufacturer's customer support for further assistance. They may be able to provide additional troubleshooting steps or arrange for a repair or replacement of your CD player if necessary.

Note: Before attempting any maintenance or repair work on your CD player, be sure to read the user manual thoroughly and follow any safety precautions.

'make model (what it is)' in all questions please.Googlemake model change radio languageyou can also use a smart phone with the Google Translate app on it and translate what you are seeing on screen.Also note that some units are for the Japanese domestic market and only come in Japanese.

Black to Red and White to White and Green to Orange.

grey usually audio

I don't have access to specific schematics for the Audiotrak 500 amplifier. However, there are a few options you can try to obtain the schematic:

1. Check the manufacturer's website: The first place to look for a schematic is the manufacturer's website. Most manufacturers provide support documentation, including schematics, for their products on their website.
2. Contact the manufacturer: You can also try contacting the manufacturer directly and asking if they can provide you with a schematic for the Audiotrak 500 amplifier. They may be able to provide you with the schematic or direct you to a source where you can obtain it.
3. Search online: You can also try searching for the schematic online using search engines like Google or Bing. Enter the model number of the Audiotrak 500 amplifier along with the term "schematic," and you may find a PDF version of the schematic available for download.
4. Consult with a professional: If you're not able to obtain the schematic through these methods, you can consult with a professional, such as an electronics repair technician. They may have access to the schematic or be able to assist you in troubleshooting the amplifier without the schematic.

I hope these options are helpful in your search for the schematic for the Audiotrak 500 amplifier. Does anyone have schematic for audiotrak 500 amplifier? I'm sorry, but as an AI language model, I don't have access to specific schematics for the Audiotrak 500 amplifier. However, there are a few options you can try to obtain the schematic:

1. Check the manufacturer's website: The first place to look for a schematic is the manufacturer's website. Most manufacturers provide support documentation, including schematics, for their products on their website.
2. Contact the manufacturer: You can also try contacting the manufacturer directly and asking if they can provide you with a schematic for the Audiotrak 500 amplifier. They may be able to provide you with the schematic or direct you to a source where you can obtain it.
3. Search online: You can also try searching for the schematic online using search engines like Google or Bing. Enter the model number of the Audiotrak 500 amplifier along with the term "schematic," and you may find a PDF version of the schematic available for download.
4. Consult with a professional: If you're not able to obtain the schematic through these methods, you can consult with a professional, such as an electronics repair technician. They may have access to the schematic or be able to assist you in troubleshooting the amplifier without the schematic.

I hope these options are helpful in your search for the schematic for the Audiotrak 500 amplifier.

Look on the back of the handle with a mirror and you should see a recessed Allen screw. Some have a decorative can on top marked H & C, or red and blue. Those pop off. No info online, but this unit comes under many names, I answered one today already, low quality, high price and probably made in China or korea. https://www.google.com/search?q=ROHL+Acqui+Two+Handle+Widespread+Bathroom+Faucet+tighten+handle ..

This could be caused by a few different things. To troubleshoot, first check the fuse box to make sure the fuses for the radio and speakers are not blown. If the fuses are secure, then you should check the wiring connections to make sure they are connected properly and not loose or frayed. If the wiring connections are good, then the problem could be with the head unit itself and you may need to contact a professional for further assistance.

If your 891 mini component system is not turning on, there could be a few possible causes for the issue. Here are some steps you can take to troubleshoot the problem:

1. Check the power source: Make sure the system is plugged in and that the outlet it is plugged into is functioning properly.
2. Check the fuse: If the system is plugged in and the outlet is functioning properly, the issue may be with the fuse. Check the fuse to see if it has blown and replace it if necessary.
3. Check the power cord: If the power source and fuse are both functioning properly, the issue may be with the power cord. Check the cord to see if it is properly connected and in good condition. If the cord is damaged, you may need to replace it.
4. Check the power switch: If the power source, fuse, and power cord are all functioning properly, the issue may be with the power switch. Check the switch to see if it is functioning properly and test it to see if it is turning the system on and off as expected. If the switch is not functioning properly, you may need to replace it.

Question edited to add 'FULL 'make model (what it is). There is a crucial word missing between 'I' and 'Bluetooth'. That verb is the key to answering the question. Bluetooth is only for calls, you can't stream videos if that is what you are trying to do? Here is the manual. https://www.google.com/search?q=boss+bv9976b+manual+bluetooth ..

Please check the link https://www.youtube.com/watch?v=eidK7FNI0GA

You will need to replace the broken wires in your scooter that are broken.

Try turning the steering wheel a bit while trying to pull it out. Best to you!

In the link https://www.google.com/search?q=2015+300+s+radio+wiring ..

I would check the uProcessor power supply has the correct voltage on it.