Top 20 Metra 86 9001 Vw/Audi/Mercedes Radio Removal Tool Questions & Answers


It’s a ground, if your amp still won’t turn on after u finished installing Then use brown one as a ground and ground it to the same one as your amplifier.

Metra Car Audio... | 1,003 views | 0 helpful votes


You need to make sure the amp turn on lead is connected... its blue with a white stripe

Metra Car Audio... | 102 views | 0 helpful votes


Need more information. Are you talking about close to the camera or at the end that connects to the radio/display?

Metra Car Audio... | 1,076 views | 0 helpful votes


I tried to recategorize this question to get it into a more probable area to get a response but found that there just isn't anything suited for this question. I would try some forums that have more specialized and probable answers to this. There's a ton of information if you locate the places that discuss these topics. Or even try ebay, there's a good chance you could find exactly what you need there or even have the question answered by a seller for free. It never hurts to ask nicely.

Metra Car Audio... | 262 views | 0 helpful votes


invalid answer no solution

Metra Car Audio... | 271 views | 0 helpful votes


The actual aerial normally a single plug with a pointy end on it which plugs into the back of the radio.If the 2 leads red and green are separate wires they sound like the power to release the aerial for semi auto pop up aerial or motor drive if it has motor attached.Depending on your radio the aerial will operate when turned on ,if not then for radio aerial with motor you will have to fit a 2 way switch

Metra Car Audio... | 122 views | 0 helpful votes


your dealership will give you the code for free. Look for a small white sticker in the glove box.

Car Audio &... | 20 views | 2 helpful votes


Google doesn't seem to know much about this and is suggesting they use the same colours as the UK and Europe.

Best idea is to get inside the appliance and take a look, in fact even better, having got that far, why not fit a suitable power cord for where you are and save possible mistakes in the future...

Car Audio &... | 15 views | 1 helpful votes


Having the correct radio code is half of what you need - you must also have the correct entering sequence for that radio. If it is the original radio the information will either be found in the vehicle handbook or in a separate audio handbook that would also be supplied with the vehicle - or you could check with the dealer.

Car Audio &... | 17 views | 0 helpful votes


Generally on car stereos, the yellow wire is connected to a constant source of 12 volts. This is used to power a clock or any other constant draw features.

Car Audio &... | 18 views | 0 helpful votes


The radio code is indicated on many peugeot models on a small white sticker inside the glove box. it will be labeled "Anti-theft radio code". Enter this code using the preset radio buttons of your peugeot radio.

Get your free Peugeot radio code online 2020


PEUGEOT RADIO CODES ' Online Peugeot Radio Decoding ...

www.radio-code.co.uk > peugeot-radio-codes
Peugeot car radios will normally contain a 14 digit serial number which can be found either printed on a label or engraved on the side of the unit. These serials are ...

CAR RADIO CODES INSTANT ONLINE SERVICE , Peugeot ...

www.instant-radio-codes.com > radio-codes-peugeot
If you have lost your Peugeot Radio Security Code then you are only a few clicks away from obtaining your code number via our Automated Servers. Affectionately ..

Car Audio &... | 16 views | 0 helpful votes


Try this. Turn the ignition on, with the engine off. Turn on the radio. Press and hold button 4. The display should change. Use the Tuning buttons to enter the code. (I think its up/down to change the numbers). Enter the first number and press button 5 to confirm. Use the tuning buttons to move along to the next number, (i think it's left/right for this bit). Repeat the method for the first number, (Set number then press five to confirm). Once you enter the last digit the display should switch back to the normal display and be ready to use.

Car Audio &... | 19 views | 1 helpful votes


It would be best if you pull the fuse panel off while your car is switched on. Pull the fuse out for about a minute! Then put the fuse back and push the power button. I hope it will solve your problem.

Car Audio &... | 13 views | 0 helpful votes


Do you know the make and model of the radio?

You state that you are trying to unlock the radio, but at what stage are you:

1) Do you have the security code and you are just trying to enter it?

2) You do not have the security code and you are trying to get the radio serial number?

3) Something else?

Car Audio &... | 20 views | 2 helpful votes


Attach a picture and give more information on the model and installation.

Car Audio &... | 28 views | 0 helpful votes

Not finding what you are looking for?
Metra 86 9001 Vw/Audi/Mercedes Radio Removal Tool Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Metra Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5023 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

jdthefixer

Level 3 Expert

747 Answers

Are you a Metra Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Metra Car Audio & Video

  • Metra Car Audio & Video

Most Popular Question

car wont start no power

  • Car Audio & Video
Loading...