20 Most Recent
Panasonic MC-V7355 Upright Vacuum - Page 3 Questions & Answers
Panasonic ecomax carpet bar won't drive
The first thing to check is make sure the belt is not broken or stretched. It is possible that a vacuum cleaner may need a new belt even if you just bought it. It may have been a year or more since it was assembled and had the belt installed. It may have spent some time in a warehouse and on the store shelf before making it to your home so the first thing to check is always the belt. If it has a stretch belt they must be stretched to almost twice their original length when installed on your vacuum and they lose elasticity. The rule of thumb in the vacuum industry is belts should be changed every three months for proper agitation. If the belt is not broken or stretched check to see if there may be something stuck in there preventing the brush roll from spinning freely.
2/26/2014 7:41:02 AM •
Panasonic...
•
Answered
on Feb 26, 2014
Panasonic mc-v6840
Low suction.Changed bag and
Check the sole plate where the roller brush is. There may be an obstruction leading from the sole plate to the main dirt channel. Usually on many Panasonic uprights the main dirt channel is a removable bent plastic tube before it meets the bottom of the hose. Check to see if this isn't obstructed. ALso check your filters on the vacuum as sometimes a blocked filter means a lack of suction.
11/12/2013 3:25:18 AM •
Panasonic...
•
Answered
on Nov 12, 2013
I need to reassemble my panasonic MC-6255 I dont
This question needs so much more information,.......... how far apart did you take it, are you sure you have all the parts left, is the brushroll out, belt off, hood off???? A picture would be really good. They are worth a thousand words you know.
10/22/2013 11:09:06 PM •
Panasonic...
•
Answered
on Oct 22, 2013
Not finding what you are looking for?