Pramac GX565AUV000 NA GS Series 5500 Maximum Load Capacity Manual Hand - Answered Questions & Fixed issues

Hi is it electric or a manual pump up with the handle type if its one these check the oil level in the unit it may just need more hydroloc oil added or the valve on the actual jack of the unit its self are leakin and need replaceing dont use it like this as very dangerous

Pramac... | Answered on May 09, 2016 | 1,523 views

There's no question here.

Hoisting | Answered on Sep 13, 2019 | 417 views

What about it?
If you have doubts about a safety related item get an engineer to call.

Hoisting | Answered on May 19, 2019 | 1,005 views

As the name suggests, for manual pallet jacks you walk behind the forks and pump the handle to raise them/lower them. On powered, or electric, pallet jacks, there is a throttle for moving and a lever for raising/lowering the forks. On some powered pallet jacks, there is a platform for the operator to stand on

Hoisting | Answered on Oct 08, 2018 | 2,286 views

make sure the pallet hindging point be free od dust... since it is open....lubricate and check ... it will work

Hoisting | Answered on Jun 22, 2018 | 1,301 views

toyato pallet jack electric , DISCUSSION FORUM -

Dec 24, 2014 - 4 posts - ‎2 authors
California, United States, I have 7hbw23 toyota pallet jack with error codes c14 and e115 e112 trying to find code list or repair manual any ... toyota pallet jack . Discussion about troubleshooting ...
7 posts
Dec 30, 2014
Error Messages for Walkie 102XM. Discussion about ...
9 posts
May 6, 2009
More results from

Forum discussions - FORKLIFTACTION, Search this ...
RESULTS 1 - 20 - 7HBW23 pallet jack no power, no fault codes. Lifting machines ...Toyota Electric pallet jack. Lifting machines ... error code C-28. Mechanical ...

toyota forklift manual 7hbw23 code c14 pdf - P(1) - srdt.sotite ...
Toyota electric pallet jack 7hbw23manual.pdf - ... I have 7hbw23toyota pallet jack with error codes c14 and e115 e112 trying to find code list or.

Code c-14 for toyota electric pallet jack - Fixya
Mar 22, 2012 - I have code c-14,try to fix it ... Hi Danny: One of the things that I do is to try to help resolve the problem, and that does not always mean answering ...

Hoisting | Answered on Oct 05, 2017 | 5,338 views

First of all clean the jacks very thoroughly. If they are really dirty, tap gently with a hammer to release sand and dirt, hose thoroughly, repeat. Lubricate every part of the jack with lots of wd40. Check that the part of the jack that extends down has been fully released and pushed up into the upper portion of the jack. Then grasp the jack with both hands and tug it down. While the jack is pulled down, swing it up under the trailer until it clicks into place.

Hoisting | Answered on Jul 30, 2015 | 1,561 views

Wire hoists are as strong and in some cases can be stronger even than chain hoists being able to lift between 1/2 up to 80 tons.

Hoisting | Answered on Nov 21, 2013 | 1,222 views

OSHA is the United states department of labor Occupational safety and health administration. They have to inspect your wire hoist every year to make sure that you and your employees are safe when they are using the wire hoists in your facility.

Hoisting | Answered on Nov 21, 2013 | 1,231 views

I found this set of instructions to be very detailed and helpful when I had to set up my wire hoist. Good luck and stay safe!

Hoisting | Answered on Nov 21, 2013 | 1,309 views

There are a lot of automatic chain hoists and you will find that they work much faster and with less effort than manual ones.

Hoisting | Answered on Nov 21, 2013 | 1,178 views

Common ratchet lever hoists have the capasity to lift up to 5 tons, but some can only lift 1/2 ton its important to consult your user manual for exact numbers before use.

Hoisting | Answered on Nov 21, 2013 | 1,241 views

The full process of dismanteling your buck hoist should be a day.

Hoisting | Answered on Nov 17, 2013 | 1,018 views

Depending on the hoist that you are renting the capacity ranges from 4000 lbs. to 8000 lbs. Before you start loading up your hoist make sure to check the capacity of the one you're renting.

Hoisting | Answered on Nov 17, 2013 | 956 views

Needing a permit to build a buck hoist depends on where you are building it. Only a few states in the US require you to get a permit and the elevator to be inspected. Indiana, Michigan, Arkansas, Washington, Nevada, North Carolina, California all require you to get a permit.

Hoisting | Answered on Nov 17, 2013 | 985 views

"A jack lift is a mechanical device used as a lifting device to lift heavy loads or apply great forces. Jacks employ a screw thread or hydraulic cylinder to apply very high linear forces.
A mechanical jack is a device which lifts heavy equipment. The most common form is a car jack, floor jack or garage jack which lifts vehicles so that maintenance can be performed.
More powerful jacks use hydraulic power to provide more lift over greater distances. Mechanical jacks are usually rated for a maximum lifting capacity (for example, 1.5 tons or 3 tons)." (Wikipedia)

Hoisting | Answered on Oct 07, 2013 | 927 views

First of all, the forks are not supposed to go all the way down to the floor, that would defeat the purpose because they would drag and you wouldn't be able to pick up a pallet. But if you think the forks should be able to go down further, just stand on the forks while pulling the lowering lever. You may need to grease the machine

Hoisting | Answered on Mar 18, 2014 | 2,122 views

Pallet jacks may also be called pallet trucks, pump trucks, or jiggers

Hoisting | Answered on Nov 22, 2018 | 1,116 views

Do you see a hole for the plug? It's leaking some oil?

Hoisting | Answered on Mar 24, 2013 | 1,178 views

chain hoists are heavier, and are more susceptible to rust, although wire hoists can also rust

Hoisting | Answered on Mar 12, 2013 | 1,156 views

Not finding what you are looking for?
Pramac GX565AUV000 NA GS Series 5500 Maximum Load Capacity Manual Hand Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Pramac Hoisting Experts


Level 3 Expert

220 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

33433 Answers


Level 3 Expert

3063 Answers

Are you a Pramac Hoisting Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides