20 Most Recent
Encon Industries 78716 Contempra Ceiling Fan - Page 7 Questions & Answers
Bush td7cnbcw tumble dryer, always worked perfectly. Only trying to turn it on the morning and the 3 and 9 hrs lights started flashing after 3 turns. Anyone know what this means?
The flashing lights on your Bush TD7CNBCW tumble dryer could indicate an error or fault in the machine. While I don't have access to specific error codes for this particular model, I can provide some general troubleshooting steps that may help you identify and resolve the issue:
1. Check the user manual: Refer to the user manual that came with your tumble dryer. It should contain information about error codes and their meanings. Look for any reference to the flashing lights you are seeing.
2. Power cycle the dryer: Turn off the dryer and unplug it from the power source. Wait for a few minutes, then plug it back in and try turning it on again. Sometimes, power cycling can help reset the machine and clear minor glitches.
3. Check the door switch: Ensure that the door of the tumble dryer is fully closed and latched. The machine may not start if the door switch is not engaged properly.
4. Clear any obstructions: Make sure the drum inside the dryer can spin freely and is not obstructed by any items or lint buildup. Clear out any debris or lint that may be blocking the drum or the lint filter.
5. Check the water tank and filter: If your tumble dryer has a water tank or condenser unit, ensure that it is empty and clean. Additionally, clean the lint filter to ensure it is not clogged, as this can affect the dryer's performance.
6. Consult customer support: If the issue persists and you cannot find a resolution in the user manual, it is recommended to contact the Bush customer support or a qualified technician who can provide specific guidance and assistance for your model.
Remember, safety should always be a priority when dealing with electrical appliances. If you're unsure or uncomfortable with troubleshooting the issue yourself, it's best to seek professional help to avoid any risks or further damage to the appliance.
6/21/2023 2:44:44 AM •
Dryers
•
Answered
on Jun 21, 2023
How do I change belt on Model LD7600 dryer
To change the belt on your Model LD7600 dryer, follow these general steps for a safe and effective replacement:
1. Start by disconnecting the dryer from the power source to ensure your safety.
2. Access the dryer drum by removing either the top panel or front panel, depending on the design of your Model LD7600. Check your user manual or specific instructions for the correct method.
3. Remove the old belt by carefully releasing its tension and taking note of how it is routed around the pulleys. Then, remove it from the pulleys.
4. Install the new belt by looping it around the drum and ensuring it's positioned in the groove. Refer to diagrams or your user manual to ensure proper routing.
5. Check the belt tension. Adjust the tensioning mechanism as needed to ensure the belt is not too tight or too loose.
6. Reassemble the dryer by replacing the top or front panel and securely fastening all screws or clips.
7. Test the dryer by plugging it back in and running a dry cycle to ensure proper functioning.
Keep in mind that specific models may have slight variations in the replacement process. Always refer to your user manual or manufacturer's instructions for accurate guidance.
6/6/2023 9:50:21 PM •
Dryers
•
Answered
on Jun 06, 2023
Harbor breeze LGF-1
great question. The good thing is that in order to remove ceiling fan blades from a ceiling fan, the instructions are generally straight forward and generic. In most cases, you'll need to shut the power off at the breaker or the fuse panel and then use a Phillips screw driver head to remove the blades.
Here's an article that provides a good step by step on how to accomplish this task:
https://hampton-lighting.com/how-to-remove-ceiling-fan-blades/
5/14/2023 1:39:47 PM •
Dryers
•
Answered
on May 14, 2023
How to load belt on pulleys
All question need full 'make model (what it is)'. But we can guess.
The tensioner idler pulley is not providing enough tension or the pulleys have somehow come out of alignment. Or the belt has stretched. One further thing is drum bearings and slides creating too much resistance and causing the belt to jump.
4/18/2023 3:55:39 AM •
Dryers
•
Answered
on Apr 18, 2023
Which thermostats goes where in a creda simplicity tumble dryer
When it comes to installing a thermostat in a Creda Simplicity tumble dryer, it can be a bit of a tricky task. But don't worry, we've got you covered! Here's a step-by-step guide to help you get the job done quickly and easily.
First, you'll need to locate the thermostat. It's usually located on the back of the dryer, near the top. Once you've found it, you'll need to remove the screws that hold it in place.
Next, you'll need to disconnect the wires from the old thermostat. Make sure to note which wire goes where, as you'll need to reconnect them to the new thermostat.
Once the wires are disconnected, you can remove the old thermostat and replace it with the new one. Make sure to connect the wires to the new thermostat in the same order as before.
Finally, you'll need to secure the new thermostat in place with the screws. Once that's done, you're all set!
Installing a thermostat in a Creda Simplicity tumble dryer may seem like a daunting task, but with a few simple steps, you can get the job done in no time. Now that you're an expert, you can tell your friends: "I'm the thermostat whisperer!"
4/15/2023 10:34:45 PM •
Dryers
•
Answered
on Apr 15, 2023
Not finding what you are looking for?