Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum - Answered Questions & Fixed issues
I need a wiring diagram for the fantom fm760
Hello, carlI was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I would take some of my own personal time to see if I can help. Even though this a Informational site may not have your exact model or brand, But this site will help you a lot. Here is the site link about everything you want to know about vacuum cleaners and possibly yours, from repair to trouble shooting it.http://home.howstuffworks.com/vacuum-cleaner.htmPlease if this helped you at all, if you can find the time and in your heart to rate my help and some kind words written would be appreciated for my free help, I would appreciate it. Like I said I just tried to help, If anything this is good information for future problems. If you felt that my free help was a waist of time for you, I'm sorry.I do not get paid to help people on the site, I do it cause I like to help.Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive, Appliance, and Electronics. Drop In anytime for my help.Thanks, Mikehttp://beta.fixya.com/users/mc1bean
My Wife Purchased on TV
Hello, trumpetI
was trying to help you out here. Maybe this will help some? I was going
back to some customers that asked questions in the recent past and even
farther back. It appeared that no one answered some of them, So, I
thought I would take some of my own personal time to see
if I can help. Even though this a Informational site may not have your
exact model or brand, But this site will help you a lot. Here is the
site link about everything you want to know about vacuum cleaners and
possibly yours, from repair to trouble shooting it.
http://home.howstuffworks.com/vacuum-cleaner.htmPlease
if this helped you at all, if you can find the time and in your heart
to rate my help and some kind words written would be appreciated for my
free help, I would appreciate it. Like I said I
just tried to help, If anything this is good information for future
problems. If you felt that my free help was a waist of time for you, I'm
sorry.I do not get paid to help people on the site, I do it cause I like to help.Here
is also my direct link to my own pages of other areas of my expertise
for other problems you might have in Automotive, Appliance, and
Electronics. Drop In anytime for my help.Thanks, Mikehttp://beta.fixya.com/users/mc1bean
I have a Fantom 500
The type of bagless that has sharp turns in the hose and plastic parts are easy to become stopped up. You have to follow the path of the air flow to find the blockage.
Not picking up, not getting any suction.
try to clean the filter out. I have a similar vacuum and I clean mine out and wash the filter out. Leave the filter to dry overnight before you use it again.
If this fails try figure out if there is something blocking it so it is not able to **** in air. message back if this does not work.
Also take the bottom off and look for obstruction and anything that is not in place
Willnt pick up good...
I had this problem once too. When the hose is inserted into the vacuum, the floor unit (where the spinning brushes are) becomes the head of the vacuum. In other words, the suction goes through the floor part and then up through the hose and into the vacuum. If the suction is good when the hose is out, the the problem is blockage at the bottom piece. Take the cover off of the rollers (it is one screw then it pops right off) and see if there is a bunch of lint/hair/gunk blocking the suction hole. You could also take the hose part out of the vacuum and look down the empty shaft with a flashlight and see if you see anything there. Hope this helps!
L need a print out
my vacuum is broken the nozzle height adjustment to match the surface being cleaner , I do not know how can that part and the part # , because I want to order a part.Can you help me, please.
Thank you.
Fantom twister 500DX
Take off the bottom plate (where you would access the belt). Put the wheel
back on, put the screw back in the wheel and looking from the underside
of the vacuum you can see the screw. You need a bolt and preferably a
lock washer and that should hold it for you.
Vaccum
Sounds like the motor is overheating and thermalling out (Hight Temp shut down). This could be caused by overfilled cannister, obstructed passageways, or debris accumulated around the motors cooling fan. Try emptying the catch container and blow out / clean all the filters. Check for obtructions by going to the hose mode and alternately blocking and uncovering the nozzle end - feel for good suction and listen for a definite change in motor sound (Pitch Change) With the intake open, the motor should rev freely, when blocked it will slow and sound labored / loaded down. Another possible cause could be a binding brush roller overloading the motor - but this will usually burn out the belt first. Notice any unusual smells? Burned belts stink like burnt rubber.
Telescopic handle
sometimes the locking mechanism for the wand wears out, make sure u have it all the way in and look where it locks and see if it looks worn
Clogged
You can call your manufacturer of the vaccuum cleaner and get some help.
Or try unplugging it and turn it upside down and beging taking it apart. Take the brush out and then work your way to the motor. There maybe something lodged up in by the brush.
Also check in the bag department and look in the hole where the bag is installed. You may have some luck there. Good luck.
Vacuum hepa gets hot
Carol,
Have you checked to make sure that all of the filters have been cleaned so that you have good air flow? The HEPA filter is your final exhaust filter and if your motor is getting hot because of poor air flow, it will cause the HEPA filter to get hot as well. Hope this helps!
Not finding what you are looking for?