20 Most Recent Excalibur. K9-MUNDIAL-SS Entry Level Auto Alarm with Dual Zone Shock Sensor - Page 5 Questions & Answers


http://www.2carpros.com/questions/1993-ford-aerostar-air-bag-code

Vehicle Parts &... | Answered on Apr 07, 2019


Carpet doesn't usually get glued down. It is held in place by the sill plates and other trim pieces. If you wish to glue it in place, 3M make a product either in a spray can or a tube. 3M trim adhesive.

Vehicle Parts &... | Answered on Apr 02, 2019


I'll tell your teacher you're cheating on your homework.!!

Vehicle Parts &... | Answered on Apr 01, 2019


A lot of people have found their manual at this site.

https://www.manualslib.com/

Vehicle Parts &... | Answered on Mar 17, 2019


That's usually an indicator light that the system is active...It can also say stay away from the novice thieves but if a pro wants your car you will be making an insurance claim. Pro's will get the car if they want it...

Vehicle Parts &... | Answered on Mar 13, 2019


If its newly installed the ignition interuption relay may not have been installed. Either that or it has been hooked up worng.

only other thing you can do is check the code.
To check if you have the correct code for programming follow these instructions:
  1. wait for the alarm to immobilise itself – IE the LED flashes slowly
  2. Turn the ignition on the LED will be constantly on,
  3. Turn the ignition off, the LED will now flash, count the flashes for the first number in the override code. For example if the first number is 3, count three flashes of the LED. When the LED has flashed the amount of times that corresponds to the first number of the code turn the ignition switch on.
  4. Turn off the ignition and count the flashes for the next number of the code and so on until all the numbers in the override code have been entered.
  5. If the code has been recognised the LED will flash very quickly for a few seconds, you are now in programming mode and the alarm is also disarmed.
  6. If the LED has not flashed quickly - start again from the beginning.
If the number is ‘0’ count 10 flashes of the LED.

Vehicle Parts &... | Answered on Mar 06, 2019


I have a 2006 Rendezvous and I have the Prostart CT-4311TW model and I have the lock/unlock and hatch working but cannot start the vehicle remotely. I too think its the bypass but I am not sure which wire is the ground. I have the DBALL2 bypass model. Any help would be appreciated.

Vehicle Parts &... | Answered on Mar 05, 2019


Hi, most cars have a procedure when you fit a new battery, the 1990s Mercedes needed to be locked and unlocked 3 or 4 times before they would start, Range Rover are the same + switch ignition on and off without trying to start it, so you just need the procedure for your vehicle ,
hope this helps,

Vehicle Parts &... | Answered on Mar 04, 2019


Torque converter clutch is stuck on. Sometimes an additive can help. If not the pan will need to come down,

Vehicle Parts &... | Answered on Feb 28, 2019


if you need any auto parts you can find them here>>www.discountbargainprices.com

Vehicle Parts &... | Answered on Feb 27, 2019


you shud be able to find a new remote here or universal one that fits your unit>>www.discountbargainprices.com

Vehicle Parts &... | Answered on Feb 27, 2019

Not finding what you are looking for?
Excalibur. K9-MUNDIAL-SS Entry Level Auto Alarm with Dual Zone Shock Sensor Logo

Popular Tags

31 questions posted

Ask a Question

Usually answered in minutes!

Top Dual Electronics Vehicle Parts & Accessories Experts

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Brad Brown

Level 3 Expert

18520 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

Are you a Dual Electronics Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Dual Electronics Vehicle Parts & Accessories

  • Dual Electronics Vehicle Parts & Accessories

Most Popular Question

k9 car alarm system kill switch

  • Vehicle Parts & Accessories
Loading...