20 Most Recent Nordic Track Nordictrack Apex 6500 Reflex Technology Treadmill - Page 8 Questions & Answers

Same thing happens to my treadmill a few times a year, and this is how I got mine working again. I went outside to my main electricity breaker box and reset all the switches. Turn them off then on again. And then did the same thing to my small breaker that's on the wall in my house. Walla...It's working back to normal again!

Check the reset/off circuit breaker. If the circuit breaker has tripped, wait for five minutes and then press the switch to the reset button. You want the switch to be on reset, make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in. Remove the key from the console, reinsert the key into the console. These are just a few basic steps and if it does not solve the problem please do not hesitate to get in touch with our Technical Support Team by chat at www.sportsmith.net or by phone at 888-713-2880 we would be happy to help you further solve the issue. Hope this helps and we look forward to hearing from you :)

A popping noise is never good, especially if a machine is powered on. It definitely sounds like an electric issue, you could try removing your main shroud, checking if your Motor Control Board (Circuit Board) is lighting up with the power on, inspect the board for any burnt or visually damaged parts, if any it is a probable cause of the issue. You can also check the fuses on your board if any for continuity, if they are bad replace them. The next thing is your main console, if you can swap it out with one you know is good then please do so, if you swap it and the machine works, the problem is your console. If not, you will need to further troubleshoot you machine. Can be one of a few things, if you need any further help after the basic checks you can contact our Technical support Team by chat at www.sportsmith.net or by phone at 888-713-2880 we would be happy to help you and look forward to hearing from you!

try pressing the reset button on the bottom of the treadmill, located toward the bottom front roller area

By "no power" do you mean that the display and lights do not come on? Or just no motion?

Most likely you need to replace the motor and MCB. I might have these parts in my shop. Also check to see if the front and rear rollers are moving freely by disconnecting the drive belt. Shoot me a email at [email protected] for parts