Questions & Answers
Can you block a silent number on landlines uniden cordless
If I get desperate I open the phone with small screwdriver and pry it open. Undo internal battery replace and if that doesn't work I've reset the brains by clearing inside dust and pressing buttons with screwdriver tip to sort of short circuit and reset the brains! I figure it's not working properly anyway it might ! It did.
106 views | 0 helpful votes
GE Dect 6.0 Cordless - Loud Static
question is are you running a pc and router/ modem on the same land line
if so you will need the line filters to the phone base
the computer data is transferred by the same land line and there is every possibility that the different frequencies is what is causing the static
reference from a uniden trouble shooter ( will be common as the phones use the same medium)
lots of noise or static on the line === possible solutions --check for interference from appliances ( microwave , tv etc ) or wireless devices ( baby monitors wifi equipment etc)
move the handset base away from the source
if you have any device that uses the phone line , add a DSL or telephone line filter to the system
it is possible from the times you state that the interference could be coming form a neighbour or further down the line so the filter may be the option
available from phone shops or places like JAYCAR
1,681 views | 0 helpful votes
My handsets both show the
Try resetting the all the handsets by removing all the batteries for one minute. Then, put them back in and try it. This may reset the units. Also, check the batteries to make sure they are still good. You don't mention what kind of handset you have, but I think many of the different brands have built in voicemail. Are you sure you are not using the service voicemail instead of the handset voicemail?
146 views | 0 helpful votes
My GE phone 27958 just stopped working. I
check power ?
Is Ac - DC converter pack plugged into power point ?
Is the DC plug plugged into the phone ?
does power point work ?
Check correct dc voltage being produced from the AC - DC power pack converter ?
Isolate other phones on other extensinos to see if uniden is cause or not of no dial tone.
You may have another phone off hook and phone line has timed out .
110 views | 0 helpful votes
Line in Use Message on Screen- GE 28213 Series DECT 6.0
to get a line you have to have the handsets in the stands or you have to use the end button to close the call
the phone stands are the battery charger and need the handsets need to there all the time-- unless answering a call --the operation is
all the handsets are in the stands being charged
a phone call comes in by lifting a handset to answer, the call is connected automatically without pressing the talk button
on finishing the call you press end but if you do not replace the handset in the stand but leave it say on the table , when you get another call you have to press the talk button to be connected as it was not picked up from the charger stand and so will not connect automatically when one handset is talking , all the other handsets can listen in and if one call is not ended , there is a line in use sound and no line
it is all in the owners manual and if you didn't get the manual , go google and down load it from the manufacturers web page as a pdf version for printing
1,232 views | 0 helpful votes
How do i access phone numbers from my phone
Search for a contact
Press the open Menu button
Use the arrow keys to select Personal. Press OK.
Use the arrow keys to select Options. Press OK.
Enter the first letter of the name you are searching, e.g. K
The first name found with the letter K is displayed
If you are looking for a name that begins with Kr, also enter the second letter in the search field:
The first name with the initial letters Kr is displayed
Use the arrow keys to find the name
Press OK to select and call the contact
89 views | 0 helpful votes
We have a Uniden N32 Model XDECT7055. How do I remove the red flashing light on top of all the phones.
If that is the Voice Mail Waiting indicator light at the top of the handset and on the base, you need to press Menu on the base. Use the up/down arrows to select VMWI Reset. Press Menu again to select this sub-menu. Use the arrows to highlight Yes and press Menu again. You may need to contact your telephone company to make sure that the voice mail service is still compatible with the Frequency-Shift Keying message notification. Some broadband (particularly DSL) systems can cause telephone interference. Check with the broadband provider if you need a DSL filter (or similar item) to keep the interference from corrupting the VMWI information.
The procedure is on page 17 (19 of the PDF) of the manual for the Uniden XDECT7055. This is available here: https://www.uniden.com.au/resources_main/pdfs/XDECT_7055_3WP_OM.pdf
I hope this helps.
214 views | 1 helpful votes
Not finding what you are looking for?