20 Most Recent One For All URC-5705 Remote Control - Page 3 Questions & Answers

The codes for the TV are....0017,0463,0178,0092...the code for combo is 1762....hope this was helpful...

This is from the URC-5705 Code Guide:
TV Zenith 0017 0463 0624 0016 0092
Hopefully one of those works for you.
Good Luck!

can you help

This is a link to your One For All URC-5705 remote control codes and instructions. The file is in .zip format and will need to be extracted, after downloading, to view the .pdf documents.
http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=other&db=devices&br=oneforall&dv=universalremote&md=urc5705access5&kw=&st=&ar=&dt=&so=&pg=3&file=others/one_for_all/urc5705-manual.zip

one of the batteries was not making proper contact and was loose,had to gently stretch spring contact out to make it stay in place .kept dislodging itself,so far so good.thanks

Access the website and see if they offer the user manual on there support site. Many companies have started providing this kind of support with PDF aka Acrobat Reader files. If not, you may need to go on a cyber expedition and try searching for it. You would be surprised what you will find in the digital Serengeti Good hunting.

please follow the steps below:

TV
RED + SELECT
TV
0157

try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.

cheers

Little Dish Fitter

Hi,

You can download the full list of programming codes by clicking the link below:
http://www.rockabilly.net/files/manuals/URC-5705-codes.pdf

Also, you can download the user manual by clicking this link:

http://www.rockabilly.net/files/manuals/URC-5705.pdf

You'll require Adobe PDF Reader installed on your PC to view this manual. If it is not already installed on your PC, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks.

Hi,

You can download the complete manual with the codes from:
http://www.remotecentral.com/ftp/others/one_for_all/urc5705-manual.zip

There are two PDF files in this zip folder. One is the user manual and the other is list of all codes.
The manual has these codes for Sharp TV:
0093
0688
0165
0039
0386
0157

Hope this solves your problem. For more help and clarifications, please reply to this post. Thanks

Hi,
The code your looking for should be one of these:
Samsung:
0060 - 0030 - 0178 - 0056 - 0019 - 0032 - 0329 - 0427 - 0482
I hope that helps.
Mike

go here:

http://www.retrevo.com/support/One-for-All-URC-5705-Universal-Remotes-manual/id/18524ag417/t/2/

I found that these websites should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/

SEARCHING FOR YOUR CODE
If your device does not respond to the
remote control after trying all codes
listed for your brand, or if your brand is
not listed at all, try searching for your
code. For example, to search for a code
for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED
blinks twice, then release SET.
3. Enter 9 - 9 - 1.The LED will
blink twice.
4. Aim the remote control at the the
TV and slowly alternate between
pressing POWER and TV. Stop when
the TV turns off.
NOTE: In the search mode, the remote
control will send IR codes from its library
to the selected device, starting with the
most popular code first.
5. To lock in the code, press and hold
SET until the LED blinks twice, then
release SET.
6. To search for the codes of your other
devices, repeat steps 1 through 5, but
substitute the appropriate device key
for the device you are searching for.

I found this off a urc-4605 manual online but I think it works for all models worked for my urc4640b00

Hello, follow this link to download the manual and the codes for your remotes:
http://www.ofausa.com/remote.php?type=URC5741
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
Mark
(For low price replacement remotes visit www.sparky-uk.com)

Can someoneplease give me alist for key code of the universal remote for one in all..... that would be realii great i reaalii needd help...
its urgent can someone pleaseee send me the list of key codes on [email protected]
Thank-you in advance:-)
Merry X-mas :-)

I tried all the codes on my remote and none has worked on this remote tsrc411. Help

Question edited to a lot more clarity and fix your broken Spacebar! https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote 0872 is the code

Daenyx DVD universal remote control codes (4 digit)

eliztech.com https://www.eliztech.com > remotes > codelists > daen... Mixed Daenyx DVD codes from a single brand of universal remote control. Highlight / Show only codes for: OneForAll x. Sort codes Show color. 4 digit codes:. ..