20 Most Recent
GMC Power Equipment Gmc Syclone 6310 Ultra Quiet Oil-free Air Compressor by GMC Power Equi - Page 2 Questions & Answers
Cannot find Thermostat valve in our Atlas copco GA15ff , I check filter housing cannot find where it is fixed
Atlas Copco compressors typically utilize a thermostat valve or a thermostat switch to regulate the temperature and ensure optimal performance. However, the specific design and components may vary depending on the model and configuration of the compressor.
If you are unable to locate the thermostat valve in your Atlas Copco GA15ff compressor but have found two thermostat switches, it's possible that the compressor uses a different mechanism for temperature control.
Here are a few steps you can take to troubleshoot the issue with the dewpoint temperature:
- Check the Thermostat Switches: Since you've found two thermostat switches, ensure that they are functioning correctly. These switches may be responsible for monitoring different temperature parameters within the compressor.
- Inspect for Malfunctions: If the thermostat switches appear to be functioning properly, inspect other components of the compressor for malfunctions or damage that could affect temperature regulation. This includes checking for leaks, clogs, or faulty sensors.
- Consult the Manual: Refer to the user manual or technical documentation for your Atlas Copco GA15ff compressor. The manual should provide detailed information about the components, including the thermostat valve or switches, and troubleshooting steps for temperature-related issues.
- Contact Atlas Copco Support: If you're still unable to resolve the issue, consider reaching out to Atlas Copco's customer support or technical service department for assistance. They can provide guidance and support based on the specific model and configuration of your compressor.
- Consider Professional Service: If the issue persists and you're unable to identify or resolve the problem on your own, it may be necessary to enlist the help of a qualified technician or compressor service provider. They can conduct a thorough inspection and diagnosis of the compressor to identify and address any underlying issues.
Husky air comp.H1820F what tool is needed to
Yeah, my H1820F has the same thing. They call them Tie Rods in the parts list. But I used inspection scope to get down on the hole in order to see what I was dealing with. And when I got both is the bolts out I had black plastic melted to my socket since I used a small DeWalt 1/4" impact with a 8" extension and a deep well socket. I was seriously worried that I was going to loose my socket in that hole and have to pull out the Dremel and cut it out. Husky designers really need to consider exactly what it is they are doing when they design the hole so small that the socket comes out with melted plastic on it. That's a clue that it's too damn tight and they need to open it up a hair. But in all likelihood it's in an effort to keep those of us who prefer to do it ourselves away from doing it ourselves. The odd thing is Husky makes tools in the DIY price range. Yet they design their tools so that you have to be freaky determined and willing to break things in order to fix it yourself. That seems like contradicting thought processes to me.
Not finding what you are looking for?