20 Most Recent Black & Decker B1561 Bread Maker Questions & Answers

Here is one site: https://www.breadmachinepartsfinder.com/node/826

It's likely a harder, heat resistant type of plastic and the breadmaker does not get hot enough to cause the paddle to release any toxic chemicals.

Ignore it.... is just carbon from use. Flour dust gets on there and over time with heat it becomes black but is harmless.

Which program are you using, white, wheat, french, etc.? Black and Decker bread makers I think ever start right away. They warm the oven gently for awhile. If your machine hasn't started mixing within 30 minutes of pressing start, only then do you have a problem. That is true for the Wheat program for sure.

The Operating Instructions & Cookbook for your Black & Decker All-In-One B1561 Automatic Breadmaker can be found online here:

http://useandcaremanuals.com/pdf/B1561241.pdf

The recipe section begins on page 16; recipes include the order for adding ingredients.

Thank you for using FixYa!

You may be able to order a paddle for your Black & Decker B1561 Bread Maker from this site:

http://www.abtecparts.com/Black_&_Decker_breadmaker_paddles.htm

Before ordering you may wish to inquire whether the Paddle 500 is a suitable replacement for the B1561 or if they can supply the correct part.

Replacement parts for the Black & Decker B1561 Bread Maker are available here:

http://www.directpartsandproducts.com/bread-makers-b1561-c-1_96_97.html

YOU CAN BUY A NEW ONE FROM AMAZON.....TYPE IN THE AMAZON SERCH BAR.......
...................................................................BREAD MAKER PARTS AND ITS CALLED A BREAD KNEEDER THEY WERE LAST WEEK £6.05 each HOPE THIS HELPS

Hello, You can find a manual for this unit on eBay if you click HERE of course it is not free but it is available. You might be able to find a free one HERE however I could not tell if it covered your specific unit. Good Luck! with regards, Dr. Know

Your Use & Care Manual is available here:

http://useandcaremanuals.com/pdf/B1561241.pdf

Your machine produces a 1.5 lb. loaf.

goto the black and decker website click on support find your machine and download it

goto the amazon website and type in the serch bar bread maker parts

press the stop button until you hear a beep or read out changes, select your new program, then push start

Hi.. The "central shaft" could mean the motor shaft is not turning or the "central shaft" could be the paddle shaft in the bread pan is not turning. If it's the motor shaft then tighten or replace belt. Since you "lost all your stuff" it could be the sealed bearing in the bottom of the bread pan has broken. The paddle doesn't turn and is leaking. If this is the case the bread pan needs replacement. Hank

here is a website that has your paddle, this is the page from that website showing your paddle:

http://www.vendio.com/stores/breadmakerguru/category/b1561/catId=3449481

recommend a chat tomorrow at 8:30 pm EST. If you want to do that please email me at:

[email protected]

oil the kneading pin at the bottom of the loaf tin (inside)