20 Most Recent Bosch 18 in. SRS45E02 / SRS45E08 Exxcel Slim-Line Free-standing Dishwasher - Page 6 Questions & Answers

0helpful
2answers

Bosch dishwasher arms not spinning

Hmmmmmmmm. If the water goes in and the pump starts yet there is no washing action I would suspect that you have an impeller failure. The impeller on Bosch dishwashers is a two piece unit and the plastic rivets slowly dissolve until he impeller fails in 2 pieces. The fix is a new impeller which is supplied with a new seal as well. I believe Bosch does this to avoid running so long without renewing the seal and having a leak. I can't think of any other reason to have a dishwasher soluble part for an impeller. It's a bit of a bit** to fix but there are good videos on utube.
11/16/2019 1:53:35 PM • Bosch... • Answered on Nov 16, 2019
0helpful
1answer

Bosch dishwasher runs w door open but no water

Check water supply to dishwasher. If ok then check water inlet filter for block. If blocked clean or replace.
11/14/2019 6:36:23 AM • Bosch... • Answered on Nov 14, 2019
0helpful
2answers

Alarm e15

Bosch SMS Series Dishwasher Fault Codes E15 Water in base Float sensor in the base has been activated. You can try to empty the base and restart the dishwasher as you will find noted many times in the forums but, if there is a leak this error code will simply be displayed again, you must find the cause of the leak. but if you have a different model it can be something else
10/15/2019 1:21:25 PM • Bosch... • Answered on Oct 15, 2019
0helpful
1answer
0helpful
1answer

My Bosch dishwasher is not draining properly and shows an error sign of EO4...I have made sure the impeller is clear.

Check your drain hose, especially where it goes into your garbage disposal. Also, if you got a new garbage disposal, make sure the plug has been knocked out in the dishwasher drain port.
10/9/2019 5:19:21 AM • Bosch... • Answered on Oct 09, 2019
0helpful
1answer

Bosch dishwasher stuck on auto

Try unplugging your dishwasher for 15 seconds or more, and then plug it back in. If that doesn't fix the problem, or if the problem comes back within a day, then you probably have a bad control board, or else the Auto key is stuck closed (like it is pressed).
10/3/2019 6:06:53 AM • Bosch... • Answered on Oct 03, 2019
0helpful
1answer

I have a Bosch dishwasher model she23r58uc/64 .... The arms are not turning and the water pressure coming out of the are is about 2 inches high... Cleaned the filter and arms move freely

There is often a filter inserted in the water feed pipe where it attaches to the machines valve and is part of the sealing washer, check that is also clear.
9/26/2019 1:48:30 AM • Bosch... • Answered on Sep 26, 2019
0helpful
2answers

What does h21 mean from the Bosh dishwasher and what can action can I take?

This is a computer error and really needs to be tested by an authorized repair company. There is one thing you might try and that is to unplug or cut the power to the unit for several minutes and see if it will reset.
9/10/2019 9:25:40 PM • Bosch... • Answered on Sep 10, 2019
0helpful
1answer

I need a owner operation manual for a Bosch under counter unit HBG23T55OJ

https://www.bosch-home.com/za/service/get-support/manual-search Possible source of manuals from manufacturer web site.
8/28/2019 2:57:44 PM • Bosch... • Answered on Aug 28, 2019
0helpful
1answer

Bosch dishwasher error code c1

HiPump-out not accomplished in normal time.Check the drainage and replace or reposition the drain hose,Clean it out by running the disposer.
8/17/2019 2:46:44 PM • Bosch... • Answered on Aug 17, 2019
0helpful
2answers

I have a bosch dishwasher error code says watertap

It means that water is not getting to the dishwasher. Make sure your water valve is turned on all the way. If that's okay, then maybe your water supply hose got kinked when you pushed the dishwasher back in it's place. As a final check, turn off the water, disconnect the water supply hose at the dishwasher, and with the end of the hose sticking in a tall bucket, turn the water valve back on. You should have a good strong flow. If not, then your water valve (under the sink) is bad, and you will probably need to call a plumber, because the problem is not in your dishwasher.
8/17/2019 6:08:45 AM • Bosch... • Answered on Aug 17, 2019
0helpful
1answer
0helpful
1answer

Bosch dishwasher back panel seal is corroded.

This is a common fault and apart from trying silicone sealant , it is beyond repair
7/12/2019 5:45:23 PM • Bosch... • Answered on Jul 12, 2019
0helpful
1answer

Bosch dishwasher S16P1B shows code E:09 before the end of a cycle. What does it mean

An "E" on any appliance means error. perhaps your drainage needs cleaned out....
6/6/2019 5:25:34 PM • Bosch... • Answered on Jun 06, 2019
Not finding what you are looking for?
Bosch 18 in. SRS45E02 / SRS45E08 Exxcel Slim-Line Free-standing Dishwasher Logo

73 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Oloyede Monsuru

Level 3 Expert

1468 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bosch Dishwashers

  • Bosch Dishwashers

Most Popular Question

dishwasher not fill water

  • Dishwashers
Loading...