DISH Network ES190482 Remote 40.0 ES190482 - Page 9 - Answered Questions & Fixed issues


Hi Lara, my name is Kimberly and I form part of the Social Media Department with DISH. I regret the inconvenience you are experiencing with our receiver. Please unplug the box from the electrical outlet for 10 seconds, plug it back in and allow it to power back on by itself. After the receiver powers back on, it will acquire signal and download the guide, the issue should be resolved. If the issue persists then we would need to look into replacing the receiver. You can reach me at: [email protected] for further assistance.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Mar 16, 2014 | 212 views


Hi Justine, my name is Kimberly and I form part of the Social Media Department with DISH. I regret the inconvenience you are experiencing with our receiver. Please unplug the box from the electrical outlet for 10 seconds, plug it back in and allow it to power back on by itself. After the receiver powers back on, it will acquire signal and download the guide, the issue should be resolved. If the issue persists then we would need to look into replacing the receiver. You can reach me at: [email protected] for further assistance.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Mar 16, 2014 | 288 views


My first suspicion rests with the quality of the HDMI cable? Expensive isn't ALWAYS good, although "cheapies" can be the worst offenders. If you have a friend that'd volunteer a temporary swap, you could determine if this is your problem. Sony rarely exhibits this type of problem.

DISH Network... | Answered on Mar 16, 2014 | 96 views


Not sure about that on satBox and tv, but you might be missing some settings about how the device reacts to that tv in specific.

DISH Network... | Answered on Mar 11, 2014 | 310 views


Hi there Dillon Snoga, my name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to help you today. Please reset the receiver by unplugging it from the wall outlet for 10 seconds, plug it back in, allow it to power back on by itself, allow it to acquire signal and download the guide. After this, you should have picture back on the screen. If issue persists feel free to reach me at: [email protected]

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Mar 06, 2014 | 63 views


Hi there Stacey, my name is Kimberly and I form part of the Social Media Department with DISH. We do not promise that our remote will control all the functions of you TV. The codes used to program your DISH remote to the TV may be limited to some functions. You can try addressing your remote to the TV using different codes. I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at [email protected]!

You can lookup the different codes here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Mar 02, 2014 | 165 views


Contact the service provider to Dish. This is not the fault to your TV. They should make it clear. Gopakumar Gopalan Google

DISH Network... | Answered on Feb 24, 2014 | 105 views


I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at [email protected]!

Follow this link to obtain the code you need to address your remote to the tv: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Kimberly.Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Feb 13, 2014 | 58 views


Hi there Patsy! My name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to assist you today!
I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at [email protected]

Please follow this link to obtain the code you will need to address your remote to the Tv: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Feb 13, 2014 | 38 views


Hi there Janice, If you have a Hopper system and have deleted all of your recordings, you may recuperate them by pressing 'Menu' on your remote, selecting 'DVR' then 'My recordings' and 'Deleted Recordings' Once you are in the 'Deleted Recordings Screen' you have the option to select 'Restore' (this option will allow you to restore all Deleted Recordings) Unfortunately no other receiver has the capacity to restore deleted recordings.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Feb 12, 2014 | 212 views


Hi there Janice! My name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to assist you. The procedure to Enable or Disable the Inactivity Standby Mode on your receiver will depend on the model of receiver you have. If you have a Hopper, you will need to press 'Menu' on your remote, select 'Settings', then 'Diagnostics, and at last 'Updates'. Once you are in the updates screen you will be able to Disable it Enable the hours. Be sure to select 'Save' once you have selected an option.
If you currently have a VIP 722 dvr, you will need to press 'Menu' > 'Preferences' and then 'Updates' Be sure to selecet the hours of Inactivity before the receiver goes into Stanby and select 'Save'. If you have any other model of receiver please email me at: [email protected] for further assistance.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Feb 12, 2014 | 156 views


Try to set it up with an other code to your device, and see the effect. With a universal remote control, we can't expect all the functions marked on it will work as it is. Just try to set it up with an other code to your device, and see which code give you the maximum functionality; and select it as. That's all we can do.
0018 0020 0041 0049 0050 0065 0101 0102 0107 0131 0139
0152 0161 0166 0177 0181 0195 0198 0209 0215 0314 0320
0379 0391 0408 0421 0634 0660 0667
These are the general setup codes to Sanyo brand TVs.
Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/

DISH Network... | Answered on Feb 09, 2014 | 49 views


Hi there Kaci, my name is Kimberly and I form part of the Social Media department with DISH. I am sorry to hear you accidentally deleted your recordings. It is my pleasure to help you. Recovering your recording would depend on the type of receiver you have. If you currently have a Hopper system, under the 'My Recordings' tab select 'Deleted Recordings' once you are in the Deleted Recordings folder simply select 'Restore'. For any other model of receiver unfortunately this option is not available, meaning your recordings have been permanently deleted. If you have additional questions or need assistance with your DISH service, feel free to reach me at: [email protected]

Kimberly. Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Jan 30, 2014 | 216 views


code for the kevin remote universal for samsung

DISH Network... | Answered on Jan 10, 2014 | 937 views


xXComparedGaming7xX, I would be more than happy to assist you with this!

It sounds like picture-in-picture is enabled. To check this, look for a PIP button on the bottom of the remote. If there is one, press it and see if you can change the settings back to normal. If it continues, let me know!

Tommy Faust
DISH Social Media Representative

DISH Network... | Answered on Nov 26, 2013 | 67 views


Hi there, my name is Kimberly and I form part of the Social Media Dept with DISH. It is my pleasure to help you today. The channel or Input in which the Tv needs to be on in order to receiver DISH signal depends on the type of cable being used to connect the DISH receiver to the TV. If you are currently using a Coax cable the TV needs to be on channel 3 or 4 in order to get a pic, if you are using RCA cables it will need to be an Input. To change inputs on the TV we advice you to use the original remote for the TV or the Input/Source button on the Tv itself. Feel free to contact me at: [email protected] for additional assistance.
Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Nov 25, 2013 | 92 views


Hi there Terri! It will be my pleasure further look into this for you. Please email me directly at: [email protected] with the phone number on your account so that I can review your equipment and further assist you.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Nov 18, 2013 | 124 views


Hi there Richard! My name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to help you with this matter. Please try resetting the receiver by unplugging it from the wall for 10 seconds. Plug it back in, allow it to power on by itself, acquire signal and download the guide. If issue persists please feel free to reach me at: [email protected] for further assistance.

Kimberly.Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Nov 18, 2013 | 362 views

Not finding what you are looking for?
DISH Network ES190482 Remote 40.0 ES190482 Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1258 Answers

The Knight
The Knight

Level 3 Expert

76407 Answers

Cindy Wells

Level 3 Expert

6136 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...