DISH Network ES190482 Remote 40.0 ES190482 - Page 7 - Answered Questions & Fixed issues


Reset it once again. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

DISH Network... | Answered on Sep 15, 2014 | 181 views


If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

DISH Network... | Answered on Sep 14, 2014 | 257 views


0029,0026.
Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

DISH Network... | Answered on Sep 13, 2014 | 609 views


Sounds like a broken power relay.

DISH Network... | Answered on Sep 11, 2014 | 163 views


according to which receiver u have.. some of the dual receivers have the MODE button hidden behind a pop open door on front of the Receiver.. and some have the Mode button under or very near the green and blue light. make sure that BOTH lights are lit.

DISH Network... | Answered on Sep 04, 2014 | 182 views


Channel 1 has always been set aside for emergency freq. (at least that has been true on all TV's in the past..

DISH Network... | Answered on Sep 04, 2014 | 54 views


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/

DISH Network... | Answered on Aug 23, 2014 | 179 views


0281,0288,0280.
Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

DISH Network... | Answered on Aug 13, 2014 | 27 views


If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

DISH Network... | Answered on Aug 09, 2014 | 30 views


0281,0288.
Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

DISH Network... | Answered on Aug 09, 2014 | 21 views


What kind of brand is hd40-300

DISH Network... | Answered on Aug 06, 2014 | 118 views


This is almost for sure going to be a bad cable connection. If it is an RGB cable then it is the red or blue. If this is a coax then the end needs to be replaced.

DISH Network... | Answered on Jul 13, 2014 | 40 views


Hi there! My name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to help. Have you replaced the batteries? If you have not already replaced the batteries, please do so. If after replacing the batteries,no lights light up on the remote, most likely the remote is defective and will need to be replaced. For further assistance, you can reach me at: [email protected] or contact us directly at:1-800-333-3474

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Jun 19, 2014 | 370 views


You don't state which model, but it may be that the fan is blocked with dust so is moving very little air. make sure that the box ix sitting on a hard surface so that the bottom air-vents are not blocked (e.g. by a carpet). On some Thompson models the fan does seem to run constantly.

DISH Network... | Answered on Jun 06, 2014 | 64 views


If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box.
http://electronicshelponline.blogspot.com/

DISH Network... | Answered on May 27, 2014 | 451 views


if you lost your remote control for the dish simple call the customer service and asked for a new remote control. there are no ways to program a regular remote to a dish receiver box.

DISH Network... | Answered on May 26, 2014 | 103 views


How do i program my dish network remote ?
Answer The instructions for programming your dish network remote completely depend on the model of your remote. The model of your remote is more than likely located on the back of the remote. You can find more information here:http://tech.dishnetwork.com/departmental...

DISH Network... | Answered on May 13, 2014 | 187 views


Just plug into wall and cat 5 to router all "VIP" receivers will instantly have Internet over power ...plug directly in wall no surge protectors .

DISH Network... | Answered on May 05, 2014 | 433 views


Try Philips, Gateway codes for the Maxent TV

Magnavox DVD codes 527, 533, 556, 554 or visit the website, where you can find the correct model of remote and codes. mydish.com
http://www.mydish.com/support/apps/remotecodes.aspx

DISH Network... | Answered on Apr 25, 2014 | 213 views


You DO have to have caller ID service with your phone company for this to work. If you don't, it won't. If you do have it, you need to go into the menu and activate the receiver to use the caller ID. If your problem is something else, you need to elaborate.

DISH Network... | Answered on Apr 25, 2014 | 83 views

Not finding what you are looking for?
DISH Network ES190482 Remote 40.0 ES190482 Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1258 Answers

The Knight
The Knight

Level 3 Expert

76407 Answers

Cindy Wells

Level 3 Expert

6133 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...